Properties Value remark
Piling density/gcm 3 0.002-0.005
Product density/gcm 3 0.8-1.7
Carbon content % í² 98 >99.5%is called
Crozzle(ash) % ín0.35
High purity graphite
Sulphur content í¦ 1000ppm
Chlorine content í¦ 50ppm
Melting point 0 c 3650
Hardness 21~33
Tensile strength(mpa) 8~10
Compressive strength(mpa) 70~110
Compressibility % í² 15
Resilient rate % í² 30
Ph 0-14
Friction coefficient 0.149
Wooden box
A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression. Metallic Gaskets: \"Metallic Gaskets\" are gaskets that are fabricated from one or a combination of metals to the desired shape and size. Common metallic gaskets are Spiral Wound Gaskets, Double Jacketed Metal Gaskets, Solid Metal Gaskets, Corrugated Metal Gaskets, Ring Type Joint Gasket used for heat exchangers, compressors, condensers, pumps, valves and turbines. These metallic gaskets are suitable for high pressure & temperature applications and require high bolt load to seal. Types: � Spiral Wound, Double Jacketed, Solid Metal gaskets, Corrugated Metal Jacketed Gaskets, Ring type joint Gaskets Non Metallic Gaskets: \"Non Metallic Gaskets\" or \"Soft Gaskets\" are gaskets that are easily compressed under a low bolt load. They are composite sheet materials that are suitable for a wide range of general as well as corrosive chemical applications. They are easily available either in sheet form or as gaskets that are cut accurately to any reasonable shape and size. Non metallic gaskets are usually manufactured from materials like arimid fiber, glass fiber, elastomers, teflon (PTFE), compressed asbestos fibre (CAF), flexible graphite etc. Types are: Non Asbestos, Asbestos, Flexible Graphite, PTFE, Viton, Silicone Rubber, Neoprene and Flange Gaskets.
Reinforced asbestos free sheets (1) stainless steel wire-mesh inserted (2) high temperature and high pressure 3) 0% asbestos Reinforced non-asbestos sheet The product is made of non-asbestos sheet that metal pressed and compounded by sheet thickness, which is extensively applied in manufacturing various motor gaskets. It is a new material that will substitute asbestos products. The product has excellent performance in dilatability, sealing equality and long life etc.. Mainly applied in automobile farming machine, motorcycle and engineering etc. , it is also can be used in high strength gaskets and cylinder gaskets etc Standard size: 1000x1000mm, 1000x1200mm, 500x1000mm, 500x1200mm. Thickness: 1.0 to 2.5mm Technical data: Density, (asbestos paper): 1.0~1.3g/cm3 Condensability: 30% Elastic recovery: >35% Sealing performance: 150-300. Wooden box
Detailed product description Graphite packing ring -content of graphite: at least 99% -can be reinforced by 304ss , nickle wire -content of wire mesh:60% Graphite packing ring, graphite gasket is formed by molding flexible graphite tape or flexible graphite braided packing, and metal materials can also be put in together. It is mainly used for sealing or valves, pumps and expansion joints, which are used in oil industry, thermoelectric station, nuclear power station and other general industries. The property solves the problemof corrosion to the valve stem completely. Typical types Available in 99% purity, corrosion inhibited and oxidation resistant grades. Supplied endless, split or as matched halves. Square or rectangular section rings supplied as standard Non-standard shapes can be producedto suit specific requirements. Metal tipped rings available for high pressure anti extrusion applications. Graphite packing sleeves with or without stainless steel eyelets are available. Typical applications Packing for dynamic sealing of compressors and pumps. Packing for valves. Packing for the gland boxes of chemical instruments. Available in almost every style of our braided packing. For composite sealing to take the place of mechanical sealing. Wooden box
Construction: Zt-410(graphite sheet jacketet tanged metal) is made by materials of three cascades. A laminated graphite is inserted into a convexo-plane metal frame perforated. It is produced by specially pressing and sticking process. This kind of sheet is be seized of the characteristics such as good compressibility and resilience, small stress relaxation, fine compensation function for uneveness of sealing surfaces and long working life. Normal style: zt-410/304 Zt-410/316 Zt-410/other tanged metal material Technical data: Compressibility: 19-23% Graphite purity: min 99% Chloride content: max 50ppm Temperature: -200 to 550 Pressure: up to 600bar Ph: 0-14 Media: Steam, mineral oils, heat transfer oil, hydraulic oil, fuel, water, seawater, freshwater. Benefit: Permanently elastic, even in hot-cold cycles over the entire temperature range, no aging, no brittleness, no hot or cold flow, long time uniform compressibility and resiliency independent of temperature. Available: Sheets gasket: zt-g410 Dimension: 500 x 1000 x 1.0 /1.5 /2.0 /2.5mm 500 x 1500 x 1.0 /1.5 /2.0 /2.5mm 1000 x 1000 x 1.0 /1.5 /2.0 /2.5mm 1000 x 1500 x 1.0 /1.5 /2.0 /2.5mm Special density , thickness or insert material are avaliable to request. Wooden box
Description:zt-600 spiral-wound gasket is formed of v-shaped metallic stripe and soft non-metallic filler by means of piled, spiral wound and connected its end and beginning by dot welded. Depend on its excellent compression resilience it is suitable for sealing spots where the alteration of temperature and pressure are frequent. It can be used as the static sealing element of pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. It has been widely applied in the fields of petrochemical, mechanical manufactory, power station, metallurgy, shipbuilding, medical and pharmaceutical nuclear power station and navigation, etc. Application: We can produce according to asme, bs, jis and en(din) standards or client request. ProductsStyleFlangeFor example Basic type swgZt-600Tongue and groove304/ptfe Swg with inner ringZt-600 irMale and female304 304/fg Swg with outer ringZt-600 crRaised face Flat face304/asb cs Swg with inner & outer ringsZt-600 ic304 304/fg cs Swg for heat exchangerZt-600 hHeat exchanger304/fg with 1 bar of dj Special shape swgZt-600 sSpecialOval Material: StyleStructureHoop materialFiller materialInner & outer ring materialNormal thickness mm GasketInner & outer ring Zt-600Without rings304(l);316(l) 321;317l 31803 Monel, Ti, ni Inc Hast.C/b Zr702 Etc. Graphite, ptfe, Asbestos Non-asb Mica, EtcCs, 304(l), 316(l), 321;317l 31803 Ti, ni Inc Hast. Monel, Zr7023.2 4.5 (0.175¡±) 6.42 3 (1/8¡±) 4 Zt-600 irWith inner ring Zt-600 crWith outer ring Zt-600 icWith inner & outer rings Color cord as asme b16.20 on request. Wooden box
Products Style Flange For example Basic type SWG ABT-601 Tongue and Groove 304/PTFE SWG with inner ring ABT-601 IR Male and Female 304 304/FG SWG with outer ring ABT-601 CR Raised face Flat face 304/ASB CS SWG with inner & outer rings ABT-601 IC 304 304/FG CS SWG for heat exchanger ABT-601 H Heat exchanger 304/FG with 1 bar of DJ Special shape SWG ABT-601 S Special Oval
Supplier: Reinforced graphite sheet, reinforced asbestos free sheet, graphite packing ring, exhaust joint gasket, spiral wound gasket, double jacketed gasket, corrugated metal gasket
Metallic Ring Joint Gaskets are suitable for high pressure and high temperature applications. The Joint Gaskets are available in R, RX, BX styles and in oval/octagonal profiles.These are manufacturered in accordance with specific tolerances on CNC machines. Ring Joint Gaskets fully comply with the ASME B16.20 standard and the API spec 6A requirements (where applicable). Ring Joint Gaskets are as per API- 6A. The units are manufactured in a variety of standard and special materials For price and specification please contact us
Ring Joint gaskets are developed for use in the petroleum industry.Ring Joint gaskets are widely used between pipeline flanges, valves and pressure vessels in the Oil & Gas industry. High operating pressure up to 1378 bar when applied in API 6B.Corrosion and chemical resistance are depending on the selected RTJ gasket material.
