Product Function
1. The parallel driving practical training platform contains intelligent driving simulation system, business host, 50-inch high-definition display, parallel driving driving software, through the driving simulation system to remotely drive the wire-control chassis system and the unmanned education vehicle.
2.The parallel driving practical training platform connects with the unmanned vehicle through 5G network, ensures the safety and stability of remote driving under the environment of high bandwidth and hourly delay of the communication band, assists the automatic driving to solve the problem that the vehicle can seamlessly take over the vehicle when the automatic driving has multi-level faults, and completes the vehicle operation tasks.
Practical training functions:
1. Remote control system software installation and debugging.
2. Remote control module installation and testing.
3. Installation and debugging of vehicle camera.
4. Driving simulator operation and remote takeover.
Analyze and collect parallel driving system voltage and waveform through IOT control system.
This equipment is an all-in-one machine that can do both hardness test, fatigue test, and integrated test in accordance with ASTM D3574, ISO 2439, ISO 3385, AS2282.8 standards. It simulates the repeated application of loads and /or movement of components occurring during long-time use and assessing the changes of the foams caused by repeated loadings. The dual-column system with drive system of servo electric actuator and roller screw-based linear actuator, capable of speeds up to 508mm per minute.
Windlass Drive: electric/hydraulic Chain speed: > 9 m/min Chain size: 12.5mm ~ 48mm Rated pull: 1 ~ 10 tons Clutch: manually/automatic Brake: manually/automatic Control: local/remote control
Sst20 inclinometer based on vigors advanced tilt measurement technology, to meet with low cost, high reliability and volume application, performs high performance-cost ratio. Sst20 employed most universal & mass-produced components, casting aluminum alloy house, universal high reliability m12-5pin industrial connector; full epoxy seal with ip69k protection, auto-test/calibration equipment which not only ensure delivery speed, also keep the consistency of goods. Thanks for vigor engineers, they adopt advanced technologies as: - cae/eda simulation; - modal test for both housing and pcb to eliminate resonance due to vibration; - comprehensive performance & function test for component & firmware; - calibration technology based on sst300 high accuracy inclinometer; - refer mil/ en/ iso/iec standards to enhance sst20 durability & reliability. Sst20 support remote diagnosis without disass embling. Mtbf more than 10 years per time. Can work in 10m submersible depth long time and has better emc ability. Sst20 output rs485/ca n/canopen and voltage/curre nt signals. Better power management to meet with automotive /truck/vehicle application without regulated power. Oem service is available with calibrated pcba or mil qualified.
Main features: 01) Program control, numerical input, simple operate; 02) High integrated hydraulic control system, accumulator fixed directly on main valve block without any pipe connecting, improve hydraulic system efficiency and easy for maintenance; 03) Advanced taper valve control, fast response, good sealing and not easy to inner leakage; 04) One-piece casting steel U-frame, radial wide guide rails, to get stable and high ram guiding accuracy; 05) Touch screen man-machine interface and automatic malfunction diagnosis and alarm, easy for machine operation and maintenance; 06) Digitized and exacted controlling striking energy, avoid surplus energy harm during striking; 07) Three inserted locating faces to avoid bolts receive force and imported locking washer is used to avoid bolts lose. 08) Fully hydraulic driving system, avoid oil and air mixing; 09) Swaying combine oil cylinder and thin piston rod flexible design; 10) High and low pressure double anti-leakage design; 11) Slow up and down in the case of releasing hydraulic system pressure to make die changing safety; 12) Ram buffer is inner hydraulic buffer, to make sure safety and effective; Optional machines: 01) Special designed die automatic lubrication, blank convey system, ejector and scale removing system are for customer to choose. They can be linked to hammer through program to realize die lubrication locating, timing, quantifying control, to improve its productivity and reduce labor intensity. 02) Remote monitor system can save maintenance engineer to userâ??s workshop time and cost. It not only save large labor and resource cost, but also supply fast service to customer to reduce loss arising from hammer stopping.
Colorful Park HD Simulator Mini Car Driving Arcade Game Racing Machine for 2 Players Brand: Colorful park Name: HD Outrun Size: 1700*2000*2350 mm Weight:300kg Power:250W Player:2
KRD14 series pendulum shock response spectrum tester is used to measure and determine the shock resistance of electrical and electronic products or packaging, and to evaluate the reliability and structural integrity of the test product in a shock environment. The shock response spectrum is the total result of a series of single-degree-of-freedom linear systems with different natural frequencies subjected to the same shock excitation response. When a product is subjected to an impact, the maximum value of its impact response means that the product has a maximum stress. Therefore, the shock response spectrum tester can better simulate the shock wave and shock energy suffered in the real environment. 1. 1200mm table size withstand 1000kg load. 2. Windows-based stable control system, full-automatic remote-control interface. 3. The control & measurement system has built-in SRS specifications and tolerances, which is convenient for users to adjust and apply. It automatically completes the test and generates reports. 4. Adjust the driving shock energy by adjusting the air pressure, which is convenient to operate and high in efficiency. 5. The equipment takes up a small area and is easy to install. Technical Specifications Model KRD14ï¼?20 KRD14ï¼?50 KRD14ï¼?100 KRD14ï¼?200 KRD14ï¼?500 KRD14ï¼?1000 Load (kg) 20 50 100 200 500 1000 Table Size (mm) 300�?300 500�?500 600�?600 800�?800 1000�?1000 1200�?1200 Response Frequency Range (Hz) 10ï½?10,000 Max. Response Acceleration (g) 50,000 30,000 25,000 15,000 10,000 5,000 Gradient of Rising Stage (dB/Otc) 6ï½?9 Tolerance Range (dB) �±6ï½?9 Overall Dimension (mm) 1300�?850�?1500 1420�?865�?1485 1200�?1200�?1650 1750�?1100�?1700 1900�?1300�?1800 2200�?1500�?2000 Power 1-phase AC220V�±10% 50Hz Weight (kg) 2000 3240 3800 4800 4500 5000 Working Environment Temperature range 0~40â??, Humidity â?¤ 80% (non-condensing) Air Source â?¤1MPa Installation Condition Foundation-free, the cement floor shall be leveled and the working distance of 800~1000mm shall be reserved around the equipment Standard MIL-STD-810
The diesel engine drives hydraulic grabs, including rings, shackles, housings, underbearing beams, bucket bodies, hydraulic devices, and radio remote control devices. The hydraulic devices are equipped with hydraulic pumps, oil cylinders, and control valve block systems. The hydraulic pumps are connected to the diesel engine connected thereto. The power is provided and the cylinder is driven through the solenoid valve. Both ends of the connecting rod are respectively connected to the inner edges of the two buckets through the pin shaft to limit and protect the grab when it is opened and closed. The grab can be remotely operated. Grab grabs with remote control or without any power supply, drive the cylinder to open and close the grab, pick and place the cargo, adapt to the harsh working environment, work under high frequency conditions, and extend the grab The working life of the company increases the efficiency of the company and overcomes production safety hazards, and is easy to operate.
Scope of use: It can be used before the crusher and for various of materials ,It run safely in the harsh environment. Feature: With the computer-simulating design, the magnetic field is forcefully. The iron core is twist both longitudinal and latitude. The heat can turn to the transformer oil easily. The coil is made of epoxy resin and they are moisture-proof, dustproof and corrosion prevention. The wing heat sink enlarge the cooling area, control the temperature. The Self-Cleaning Iron separator is easy to maintenance, the Waist-drum shape roller can rectify the belt automatically, the labyrinth type bearing seat is whole-sealed ,this is suitable for the dusty area. With the multi-function of the Rectifier control cabinet, near /remote controlling convert and the arrangement is widely.
E-Film is a Cl flexo press with most advanced technology. Integrating with the Siemens control and drive system, the press is featured with cantilever sleeve quick change, more automatic in operation & maintenance, complete sets of supporting functions, and CE certificate. Features SIEMENS control & servo drive system Cantilever structure for anilox sleeve and print sleeve Central drum with contant temperature control system Close chamber doctor blade, reliable and easy for change Non-stop roll change ( unload/load platform) Job management system Easy operation pre-register system Pressure servo control Adjustable drying system Ink control and auto wash system Volatile gas recovery device System fault monitoring system Remote diagnosis and maintenance system
