Functional requirements:
Automatic transmission assembly physical production, the key parts of the transmission to open anatomy, anatomical section for fine color separation. Make the input and output shafts, gears, and other internal structures clearly visible, easy for students to observe intuitively.
The training device can display the internal circuit and power supply system of the original electric vehicle on the basis of slicing the original electric vehicle in normal operation. Equipped with a training bench, including a fault setting module and a measurement panel, the original vehicle circuit can be easily restored to ensure the same function as the original electric vehicle; the educational equipment can also be connected to the training bench for fault setting experiments.
Product composition
The Power Steering Trainer is based on the Toyota Corolla front axle, and fully demonstrates the composition and working process of the electric power steering system and the front axle suspension system.
1. This didactic equipment can simulate normal engine operation, ie. starting, idling, acceleration, deceleration, fault detection and diagnosis, fault simulation, etc.
2. Equipped with fault simulation systems can simulate multiple failures in the real engine.
3. Equipped with voltmeter to show the real-time change of the sensors and actuators
4. Equipped with LED light to simulate the status of the injecting system and ignition system.
4. Equipped with pressure gauges to display the pressure value and vacuum pressure value.
5. Equipped with diagnosis seat which can use a scanner to read the fault codes and data flow of the engine control system through the diagnosis seat.
6. The training panel is printed with the color circuit schematics which makes the students can understand and analyzing the engine control system directly.
7. There are test terminals mounted on the training panel. electrical signal, such as the resistance, voltage, current, frequency, waveform of the sensors, actuators can be measured by multimeter or oscilloscope through the test terminals.
8. Equipped with power switch, tank guard, flywheel and other rotating parts shields to protect the students and teachers.
9. Equipped with fault setting module: manual fault set module.
Function introduction of main components of the rear wheel drive transmission system;
Demonstration of the work principle and process of the rear wheel drive transmission system;
Demonstration of the work principle and process of brake system;
Demonstration of the work process of the clutch, gear shifting.
1. Demonstration control experiment of reach stacker machinery
1) For snatch operations, the snatch beam is positioned according to the length of the container;
1) For lifting operations, the main boom and the telescopic boom are combined for work experiments;
2) Swivel operation, lifting the beam while lifting the platform while the platform is rotating; (with motor rotating platform)
3) Obstacle operation, when the main boom and the telescopic boom are combined work, the servo cylinder on the top of the telescopic boom or the four obstacle detection cylinders distributed at the four corners of the grab beam will give the main system a stop or descend command (optional) when it encounters an obstacle;
4) Return, the platform rotates, the main boom and the telescopic boom cooperate to return to the initial position.
2. Programmable controller (PLC) electrical control experiment: machine-electric-hydraulic integrated control experiment.
1) PLC instruction programming, ladder diagram programming learning;
2) Learning and using PLC programming software;
3) Communication and online debugging between PLC and computer;
4) The application of PLC in hydraulic drive control and the optimization of control schemes.
1. Demonstration control experiment of hydraulic loading machinery
1) For loading operation, after the bucket is loaded, the rocker cylinder extends to make the bucket reverse and the boom lifts;
2) Unloading operation, bucket unloading (the rocker arm retracts to make the bucket turn), and the boom descends.
2. Programmable controller (PLC) electrical control experiment: machine-electric-hydraulic integrated control experiment.
1) PLC instruction programming, ladder diagram programming learning;
2) Learning and using PLC programming software;
3) Communication and online debugging between PLC and computer;
4) The application of PLC in hydraulic drive control and the optimization of the control scheme.
1, to understand the structure of escalators, tightening device, rungs, ladder rails, armrest straps, traction chain, comb plate, drive device and other major components name and role.
2, to understand the role of escalator installation protection device, installation position includes: traction chain break protection device, armrest belt entrance safety protection device, ladder subsidence protection device, drive chain break protection device, armrest belt break protection device, brake, mechanical locking device.
3, escalator basic safety operation and use; 4, rung disassembly operation;
5, comb plate adjustment; 6, comb cutting edge plate adjustment; 7, armrest belt tension adjustment;
8, the adjustment of the ladder chain tension; 9, the adjustment of the drive chain; 10, ladder anti-reversal mechanical experiments;
11, upper and lower traction chain safety experiment 12, host chain safety experiment
Product features;
1. The inertial combination navigation system practical training platform contains inertial guidance host, satellite antenna (2), RF connecting line (2), inertial guidance attitude simulation device. It can realize the functions of GPS static measurement and data processing, basic structure of GNSS-RTK system, benchmark position selection erection and input setting of relevant parameters.
Practical training program:
1. Installation and physical calibration of inertial navigation.
2.GPS software calibration.
3. Position data information raw data processing and analysis.
4.Learning equipment attitude change through visualization software.
5.Navigation mode configuration.
Product Features;
1. The training platform contains ultrasonic radar (8), low-speed collision controller, millimeter-wave radar radar sensor (77HZ), CAN analyzer. Millimeter-wave radar and ultrasonic radar system can realize the installation and adjustment of practical training, as well as installation and adjustment of the data after the completion of the preservation and analysis. Through the interface free switching can view the ultrasonic and millimeter wave radar detected obstacle information.
Practical training program:
1. millimeter wave radar collected obstacle information data analysis.
2. millimeter-wave radar scanned obstacle coordinate system analysis.
3. Ultrasonic radar data information processing.
I. Product features;
1.The LiDAR practical training platform contains three different types of radar: 16-line LiDAR, solid-state LiDAR and single-line LiDAR, which is convenient for the trainees to analyze the point cloud data and principle of the three types of LiDAR. It can realize the functions of teaching the principle of LiDAR, installing and calibrating, and analyzing the data of detection targets.
Practical training program:
1. Lidar sensor installation and calibration.
2. Lidar sensor mechanism and principle teaching.
3.Lidar sensor fault setting and troubleshooting.
4.Learning the principle and difference of three kinds of LiDAR through visualization software.
Data analysis and processing of obstacle information.
Product Function;
1. Binocular camera practical training platform contains binocular camera assembly, speed simulation device, moving target, alarm device, through the upper computer software to complete the FCW, LDW, HMW and other auxiliary driving functions and auditory system, visual system alarm and other functions.
Practical training program:
1. Complete camera detection, communication configuration, camera calibration, attitude learning, warning learning, etc. through camera installation tools.
2. Learning calibration of binocular camera through moving target.
3. Real-time running results of lane lines and obstacles can be viewed through the camera demonstration interface.
4. Camera collision warning function through simulated vehicle speed detection.
5. Image acquisition and analysis.
I. Product Function
1. The wire-controlled chassis practical training platform is mainly composed of three major systems, i.e. the power system, brake system and steering system, which is in line with the standard of L6e light tram regulation, and completes the wire-control simulation of wire-control steering, wire-control braking, and wire-control driving system through the visualization software. Trainees can input fixed commands to control the work of the relevant systems as a way to learn the principle of the wire-controlled chassis system.
Practical training program:
1. Read and control the working status of the three major systems through the OBD special diagnostic interface.
2. Detect the control logic of the wire control system.
3. Initialize and calibrate the steering system through the special calibration software.
4. Read the steering information and command writing through CAN interface, read the gear system and command writing.
5. Wire control chassis program writing and fault analysis
6. Analyze and collect system chassis system voltage and waveform through IOT control system.
1. The structure and working principle of hydraulic transmission and components;
2. Demonstration control experiment of hydraulic bulldozing machinery;
3. Demonstration control experiment of hydraulic bulldozer
4. Shoveling action of hydraulic bulldozer;
5. Earth-moving action of hydraulic bulldozer;
6. Unloading action of hydraulic bulldozer;
7. The hydraulic bulldozer returns when it is empty;
1, escalator armrest installation and adjustment of practical training equipment
2, ladder ladder installation and adjustment of practical training equipment
3, escalator traction machine system installation and adjustment of practical training equipment
4, ladder drive mechanism installation and adjustment of practical training equipment
5, escalator mechanical anti-reversal system, electrical anti-reversal system installation and commissioning training equipment
6, ladder lubrication system assembly and experimental training equipment
7, ladder safety protection system assembly and action experiment training equipment.
1, sensor detection
2, the basic use of the drive
3, timer instructions
4, mathematical instructions
5, high-speed counter
6, car automatic switch door control
7, elevator simulation run call indication driver
8, floor display
9, door machine torque safety protection
10, hall door security control
11, elevator terminal switch protection
12, elevator lift deceleration control
13, the use of photoelectric encoder positioning
1, let students familiar with the industrial commonly used sidewalk escalators working principle, structure composition, low-voltage electrical structure and principles.
2, through the analysis of electrical schematics, students with the help of schematic analysis, master the safety protection and working form of elevators, and through analysis and measurement, to find out the location of fault points, a deep understanding of the operation of elevators.
3, improve the actual hands-on analysis ability of students, and actually improve the level of skill operation.
4, through the analysis and elimination of elevator faults, to complete the common elevator fault cognition and understanding.
5, through the PLC host programming, understand the PLC program programming principles and methods. 6, escalator safety operation and use of practical training
7, rung disassembly operation and practical training
8, comb plate adjustment and practical training
9, armrest belt tension adjustment and practical training
10, rung chain tension adjustment and practical training
11, brake adjustment and practical training
12, maintenance before the safety knowledge operation and practical training
Daily maintenance
13, escalator emergency rescue
14, escalator safety circuit fault finding and troubleshooting practical training
15, escalator access circuit fault finding and troubleshooting training
16, escalator safety monitoring circuit fault finding and troubleshooting training
17, escalator power circuit fault finding and troubleshooting practical training
18, escalator control circuit fault finding and troubleshooting training
1, to understand the structure of escalators, tightening device, rungs, ladder rails, armrest straps, traction chain, comb plate, drive device and other major components name and role.
2, to understand the role of escalator installation protection device, installation position includes: traction chain break protection device, armrest belt entrance safety protection device, ladder subsidence protection device, drive chain break protection device, armrest belt break protection device, brake, mechanical locking device.
3, the basic safety operation and use of escalators;
4, rung disassembly operation;
5, comb plate adjustment;
6, comb cutting-edge plate adjustment;
7, armrest tight adjustment;
8, the adjustment of rung chain tension;
9, the adjustment of the drive chain;
10, escalator anti-reversal mechanical experiments;
11, upper and lower traction chain safety experiments
12, host chain-breaking safety experiments
Product Description
Based on the engine, it shows the internal structure of the engine visually through anatomy, and the stepping dual motors are used as the power source, with the transparent tempered glass cover, students can observe the running state of the engine intuitively.
Functional features:
Display function:
Large and reasonable deep anatomy, with different colors to identify different systems and parts respectively, fully displaying the external and internal detail structure of the engine and accessories.
1. The structure and working principle of hydraulic transmission and components;
2. Demonstration control experiment of hydraulic excavator;
3. Electrical control experiment, electro-hydraulic integrated control experiment;
4. The structure and application of hydraulic valve block;
5. Demonstration control experiment of hydraulic excavator
6. The cross rocker controls the rotation operation, the boom is raised and the platform rotates at the same time
7. The cross rocker controls the unloading operation, and the bucket and stick work at the same time the boom can adjust the height of the position
8. The cross rocker controls the return, the platform rotates, the boom and the stick cooperate to return to the starting position of excavation
1. Through the teaching board, students can detect and intuitively understand the structure and functional principle of each
component of the gearbox.
2. The platform is equipped with two-dimensional code. Teachers and students can scan the two-dimensional code to obtain the
corresponding teaching resources of the platform.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1. Through the teaching board, students can detect and intuitively understand the structure and functional principle of each
component of the gearbox.
2. The platform is equipped with two-dimensional code. Teachers and students can scan the two-dimensional code to obtain the
corresponding teaching resources of the platform.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1. This trainer can simulate normal engine operation, ie. starting, idling, acceleration, deceleration, fault detection and diagnosis, fault simulation, etc.
2. Equipped with fault simulation systems can simulate multiple failures in the real engine.
3. Equipped with voltmeter to show the real-time change of the sensors and actuators
4. The training panel is printed with the color circuit schematics which makes the students can understand and analyzing the engine control system directly.
5. There are test terminals mounted on the training panel, electrical signal, such as the resistance, voltage, current, frequency, waveform of the sensors, actuators can be measured by multimeter or oscilloscope through the test terminals.
6. Equipped with power switch, tank guard, flywheel and other rotating parts shields to protect the students and teachers.
7. Equipped with fault setting module: manual fault set module.
Training courses
Function introduction of main components of diesel engine;
Demonstration of engine running, starting, accelerating etc;
Measurement of the signals of the sensors and actuators by multimeter or oscilloscope;
Fault set and troubleshooting.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1. This trainer can simulate normal engine operation, ie. starting, idling, acceleration, deceleration, fault detection and diagnosis, fault simulation, etc.
2. Equipped with fault simulation systems can simulate multiple failures in the real engine.
3. Equipped with voltmeter to show the real-time change of the sensors and actuators
4. The training panel is printed with the color circuit schematics which makes the students can understand and analyzing the engine control system directly.
5. There are test terminals mounted on the training panel, electrical signal, such as the resistance, voltage, current, frequency, waveform of the sensors, actuators can be measured by multimeter or oscilloscope through the test terminals.
6. Equipped with power switch, tank guard, flywheel and other rotating parts shields to protect the students and teachers.
7. Equipped with fault setting module: manual fault set module.
Training courses
Function introduction of main components of diesel engine;
Demonstration of engine running, starting, accelerating etc;
Measurement of the signals of the sensors and actuators by multimeter or oscilloscope;
Fault set and troubleshooting.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
Function introduction of main components of the engine;
Demonstration of the work principle and process of the engine;
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
Function introduction of main components of the rear wheel drive transmission;
Demonstration of the work principle and process of the rear wheel drive transmission;
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
The trainer demonstrates the fundamentals and construction of the engine.
Students can do hands-on disassembly and repair on the mobile flip frame.
The transmission device can rotate 360o, and can be rotated at any angle during disassembly.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:The trainer displays the basic principles and structures of rear wheel drive transmission.
Students can have practical operation of the disassembly and repair of the rear wheel drive transmission on the mobile flip stand.
The transmission can be rotated 360o and still at any angel in the process of disassembly.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
Function introduction of main components of the automatic transmission;
Demonstration of the work principle and process of the automatic transmission;
Measurement of the signals of the sensors and actuators by multimeter or oscilloscope;
Fault set and troubleshooting
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1. This didactic equipment can simulate normal engine operation, ie. starting, idling, acceleration, deceleration, fault detection and diagnosis, fault simulation, etc.
2. Equipped with fault simulation systems can simulate multiple failures in the real engine.
3. Equipped with voltmeter to show the real-time change of the sensors and actuators
4. Equipped with LED light to simulate the status of the injecting system and ignition system.
4. Equipped with pressure gauges to display the pressure value and vacuum pressure value.
5. Equipped with diagnosis seat which can use a scanner to read the fault codes and data flow of the engine control system through the diagnosis seat.
6. The training panel is printed with the color circuit schematics which makes the students can understand and analyzing the engine control system directly.
7. There are test terminals mounted on the training panel. electrical signal, such as the resistance, voltage, current, frequency, waveform of the sensors, actuators can be measured by multimeter or oscilloscope through the test terminals.
8. Equipped with power switch, tank guard, flywheel and other rotating parts shields to protect the students and teachers.
9. Equipped with fault setting module: manual fault set module.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1. The working principle and process is displayed by the LED indicator on the panel. And the
change of the wheel speed can be monitored in time.
2. The complete schematics and test terminal of the ABS braking system are printed on the test panel, the signal such as voltage, resistance, frequency, etc. of various sensors can be measured through the test terminals.
3. Pressure gauges are installed on the bench which can display the hydraulic pressure changes in the master cylinder and the brake cylinder when braking.
4. After setting the fault, the trainees can use the instruments to check out the location and the failure through the fault troubleshooting exercises.
Training courses
Function introduction of main components of the ABS brake system;
Work principle introduction of the ABS brake system;
Demonstration of how the ABS brake system works when braking.
Measurement of the signals of the sensors and actuators by multimeter or oscilloscope;
Fault set and troubleshooting
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
Function introduction of main components of hybrid engine;
Demonstration of hybrid engine running, starting, accelerating etc;
Measurement of the signals of the sensors and actuators by multimeter or oscilloscope;
Read fault code, data stream and remove faults through the scanner;
Fault set and troubleshooting.
The Automotive training equipment hybrid engine dissection teaching model trainer uses hybrid engine cutaway to observe the components and parts of hybrid engine, such as the generator, motor, gearbox, etc in the structure of the hybrid engine system.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
Function introduction of main components of the rear wheel drive transmission system;
Demonstration of the work principle and process of the rear wheel drive transmission system;
Demonstration of the work principle and process of brake system;
Demonstration of the work process of the clutch, gear shifting.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1. A running auto power seat system fully demonstrates the composition and working process of the power seat system.
2. The teaching board integration is with the power seat control switch, and the power seat assembly is installed on a detachable base, which shall be connected with special cable.
3. The board is painted with spray-painted circuit diagrams and equipped with detection terminals. The servo motor and switch electrical signals of the power seat, such as resistance, voltage, current and frequency signals, can be directly detected on the board.
4. The teaching board is equipped with a fault setting system, which can set one or more common faults to simulate the circuit faults of the automobile power seat system, so as to achieve the purpose of examination.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
The equipment is based on automobile starting system and charging system, and fully shows the composition structure and working process of starting system and charging system. It is applicable to the teaching needs of starting system, charging theory and maintenance training in secondary and higher vocational and technical colleges, general education colleges and training institutions.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1. Actual new vehicle components, connectors, and factory wire colors
2. Provides an advanced level of instruction by duplicating actual on-vehicle troubleshooting procedures
3. Intermittent and hard fault codes can be inserted using the built-in keypad or a single computer
4. Ability to perform actual service manual test procedures
5. Courseware includes Instructor Guide, Student Manual, and Service Manual Information
6. Battery posts are protected against polarity reversal
7. Includes internal power supply for fault activation
8. Controlled by Body Control Module (BCM).
9. Operated as a stand-alone trainer
10. The key fob can be used to lock and unlock the doors when used as a stand-alone unit
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
This training bench fully demonstrates the composition and structure of the manual air conditioning system of the car, and also visually shows the working state and process of the manual air conditioning system of the car. This machine can be used in secondary vocational colleges, higher vocational and technical colleges, general education colleges and professional automotive training institutions to meet their teaching needs of manual air conditioning system theory and maintenance practical training.
The main configurations are compressor, all sensor equipment, high & low pressure pipes, actuator equipment, air conditioning harness, condenser ECU, drying bottle ECU, blower, air outlet and air conditioning operation panel ECU, etc.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
CAN-BUS LAN communications system, including ECU, doors, windows, seats, mirrors and other parts and the control of central controller Can show automotive comfort systems and power systems (engines, transmissions, ABS) of the structure and working process With a diagnosis of connectivity is available through automotive fault diagnostic apparatus for a computer system as a whole comfort CAN data transmission network and terminal control unit for testing PVC panel and the principle of combining detection and diagnosis on-site, repeatable non-destructive testing various parameters of electrical systems LED lighting display system of the CAN system works to synchronize Tips With a fault simulation system to facilitate students examinations The movable device of universal caster wheel for the convenience of teaching
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
Fully operational Self Restraint System Trainer manufactured using genuine components
air bag system including: driver & passenger air bags & seat belt pretensioners, safety & impact sensors, with two ECUs, operational and deployed
Sectioned seat belt pre-tensioners and deployed ECU
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1. Cognition of the configuration of the car wiper system
2. Understand the control principle of the car wiper system
3. Master the basics of automotive wiper systems
4. Master the working principle of the wiper system
5. Ability to independently enumerate and interpret components of the wiper system
6. Master the operating conditions of the actuator of the car wiper system
7. Independent troubleshooting, maintenance and repair of the car wiper system
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
Test terminals are installed on the panel of the training platform, and the electrical signals of each sensor, actuator and transmission control unit pin, such as resistance, voltage, current and frequency signals, can be directly detected on the panel.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
These trainers are fully reconditioned vehicles that have been specially modified so that all parts, components and wiring are easily accessible for student work.
These vehicles are ideal for training and performing practical exercises such as steering and wheel alignment, tune up, lubrication servicing, brake adjustment, electrical trouble shooting and studying general system characteristics.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
The Power Steering Trainer is based on the Toyota Corolla front axle, and fully demonstrates the composition and working process of the electric power steering system and the front axle suspension system.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
After dissecting the electric vehicle assembly; configuring teaching materials, suitable for automotive professional assessment and training.
Characteristics:
1. The main assembly is dissected and distinguished by various colors and treated for rust prevention.
2. The movement process of each main component can be clearly
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
After dissecting the electric vehicle assembly; configuring teaching materials, suitable for automotive professional assessment and training.
Characteristics:
1. The main assembly is dissected and distinguished by various colors and treated for rust prevention.
2. The movement process of each main component can be clearly seen.
3. It can meet the teaching of the whole vehicle structure and basic working principle.
4. The cover, interior and paint color are not damaged and the configuration is complete.
5. After dissection, it does not affect the function of each system of the vehicle.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
This training bench fully demonstrates the composition and structure of the manual air conditioning system of the car, and also visually shows the working state and process of the manual air conditioning system of the car. This machine can be used in secondary vocational colleges, higher vocational and technical colleges, general education colleges and professional automotive training institutions to meet their teaching needs of manual air conditioning system theory and maintenance practical training.
The main configurations are compressor, all sensor equipment, high & low pressure pipes, actuator equipment, air conditioning harness, condenser ECU, drying bottle ECU, blower, air outlet and air conditioning operation panel ECU, etc.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
On the basis of maintaining the relative integrity of the sheet metal, mechanical, electrical and battery systems of the original
car, the key parts of the body cover and frame are dissected reasonably to show the internal structure of the system.
(Customizable)
Students can intuitively understand the internal structure of the car, and the location of components; And the actual state of the vehicle in operation.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
This equipment adopts pure physical objects on the basis of the electric car battery management control system, dynamically
monitoring unit, single battery voltage, dynamic estimate battery capacity, battery temperature, dynamic display of the dynamic monitoring all the battery information, key real-time processing, dynamic monitoring, dynamic loop current total alarm indication, charging real-time control, etc.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
The training device can display the internal circuit and power supply system of the original electric vehicle on the basis of slicing the original electric vehicle in normal operation. Equipped with a training bench, including a fault setting module and a measurement panel, the original vehicle circuit can be easily restored to ensure the same function as the original electric vehicle; the educational equipment can also be connected to the training bench for fault setting experiments.
Product composition
1. Whole electric vehicles cutaway;
2. Training board.
3. Fault setting module:
Training Courses
1. Understand the internal structure of electric vehicles;
2. Understand the function, working principle and structure of each system of electric vehicle;
3. Test and analysis of electrical signals of various internal systems of electric vehicles;
4. Fault diagnosis and analysis of various systems of electric vehicles;
5. Troubleshooting of various systems of electric vehicles.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
The training device can display the internal circuit and power supply system of the original electric vehicle on the basis of slicing the original electric vehicle in normal operation. Equipped with a training bench, including a fault setting module and a measurement panel, the original vehicle circuit can be easily restored to ensure the same function as the original electric vehicle; the educational equipment can also be connected to the training bench for fault setting experiments.
Product composition
1. Whole electric vehicles cutaway;
2. Training board.
3. Fault setting module:
Training Courses
1. Understand the internal structure of electric vehicles;
2. Understand the function, working principle and structure of each system of electric vehicle;
3. Test and analysis of electrical signals of various internal systems of electric vehicles;
4. Fault diagnosis and analysis of various systems of electric vehicles;
5. Troubleshooting of various systems of electric vehicles.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
This equipment is based on the whole vehicle, dissects each assembly of the whole vehicle, and each system can work normally after the dissection, which is convenient for teachers and students to understand the structure and engineering of the vehicle. Learn more about the principles of operation.
The equipment is suitable for practical training and teaching on the structure and working principle of automobiles in middle/higher vocational colleges and training institutions.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
Familiar with the structure and function of vehicle four-wheel steering system
Demonstration of vehicle four-wheel steering principle in different condition.
Fault setting and troubleshooting in four wheel steering system
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
automotive steering system educational equipment simulator, China, manufacturers, suppliers, engineering, OEM, ODM, education automotive equipment, auto teaching equipment, teacher teaching equipment, common rail diesel engines, Automotive Electrical Simulator, electrical and electronics educational equipment
Hot Tags: car air conditioner teaching equipment, China, manufacturers, suppliers, engineering, OEM, ODM, door open alarm system, car hydaulic parts, automotive training equipment, cvt model, automobile automatic air conditioning system, automobile cutaway training models
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
which fully demonstrates the composition and working process of the automatic air conditioning system. It is suitable for the teaching needs of automatic air-conditioning system theory and maintenance training in middle and higher vocational and technical colleges, general education colleges and training institutions.
The operation panel of the training platform is equipped with an air conditioner operation panel and a temperature display, which can change parameters such as indoor temperature and outdoor temperature in real time.
There are detection terminals installed on the panel of the training platform, which can directly detect the electrical signals of the pins of each sensor, actuator, and transmission control unit on the panel, such as resistance, voltage, current, frequency signals, etc.
Hot Tags: car air conditioner teaching equipment, China, manufacturers, suppliers, engineering, OEM, ODM, door open alarm system, car hydaulic parts, automotive training equipment, cvt model, automobile automatic air conditioning system, automobile cutaway training models
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1. The training platform focuses on the directional development of new energy vehicle motors and control systems, and is equipped with vehicle motor controllers and high-voltage power distribution boxes. It can realize the operation status demonstration and routine signal detection of the permanent magnet synchronous motor.
2. Product composition: powertrain disassembly and assembly training platform, intelligent information collection and detection box, drive energy supply platform, three-phase high-voltage connection cable, low-voltage communication connection cable and other important components.
3. The motor type is a three-phase permanent magnet AC synchronous motor. The maximum output torque of the motor is 310N.m, the rated torque is 160N.m, the maximum input power is 160kW, the rated power is 80kW, and the maximum output speed is 12000rpm.
4. The transmission is a single-speed fixed gear ratio transmission, the main reducer reduction ratio is 9.266, the first-stage transmission ratio is 3.217, the main reduction transmission ratio is 2.880, and the distance between the center of the motor shaft and the center of the differential is 239mm.
Product components: hydrogen tank, lithium ternary energy storage package, motor, workbench, LED lights, drive shafts, wheel hub assembly, etc. Using this experimental bench, students can easily and truly understand the operation of hydrogen energy vehicles, the shape of each component, and the mechanism of each other.
The use of this lab can make students easily and truly understand the operation of hydrogen energy vehicles, the shape of each component, the connection between each organization, and deepen students' understanding of the composition and work of the hydrogen energy system.
It deepens students' understanding of the composition and working principle of the hydrogen energy system and helps them understand the control theory.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1. Engine works properly and smoothly, it can show the structures and work processes of hybrid gasoline engine;
2. It can clearly show the working process of the gasoline engine and three-phase AC motor.
3. The test panel is printed with complete electrical control system schematics and mounted with test terminals, the signal parameters such as voltage, resistance, frequency, etc. of the sensors and actuators can be tested by multimeter or oscilloscope.
4. The trainer is equipped with diagnosis seat, it can be connected to scanner to read or clear fault codes, and read data stream and can be used for other engine self-diagnosis function.
5. The trainer is equipped with fault setting module: manual fault set module.
Training courses:
Function introduction of main components of hybrid engine;
Demonstration of hybrid engine running, starting, accelerating etc;
Measurement of the signals of the sensors and actuators by multimeter or oscilloscope;
Read fault code, data stream and remove faults through the scanner;
Fault set and troubleshooting.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
Gasoline Engine Assembly and Disassembly Type Equipment that equipped with fuel, cooling, intake, exhaust panel so that it can be used for variety of theoretical training and simulating.
Easy to check and diagnose all faults that can happen in an actual vehicle system so that it's able to do effective education concerning maintenance system.
Ideal model of starting gasoline engines and able to assemble and disassemble.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1) Light circuit practice module
- Made by LED light system (Head light, Turn signal, Taillight)
- Experiment panel should be carved in AL coating panel and printed
- Consist of a headlight, a multifunction switches, relays,connection terminals
2) Side Mirror folding practice module
- Arrangement of parts of Side Mirror folding
- Consist of a folding set, a connect terminal, side mirror folding switch
3) Door/ Window circuit practicemodule
- Arrangement of parts of Door/Window and checking theory and operation by composing
actual window circuit
-Consist of door actuator, window motor connect terminal, side mirror door switch
4) Horncircuit practice module
- Test of horn system circuit
- Theory education, circuit completion and test of horn system
5) Ignition practice module
- Test of Ignition practice module
- Consist of ignition plug, Gap measuring device, air intake,Vmeasuring Device
6) Injection practice module
- Test of Injection practice
- Consist of 4 injector, delivery pipe, injector Voltage Measuring Device
7) Multi function input switch module
- Test of Multi channel input switch- Consist of multi function switch, key switch, emergency switch, connector terminal
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
he fuel injection trainer for Volkswagen adopt 1.8T original TSI engine assembly, It is suitable for the teaching needs of structure and principle cognition, function dynamic demonstration, fault simulation and assessment, fault detection and maintenance, fault diagnosis and troubleshooting of each module
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
The training device can display the internal circuit and power supply system of the original electric vehicle on the basis of slicing the original electric vehicle in normal operation. Equipped with a training bench, including a fault setting module and a measurement panel, the original vehicle circuit can be easily restored to ensure the same function as the original electric vehicle; the educational equipment can also be connected to the training bench for fault setting experiments.
Product composition
1. Whole electric vehicles cutaway.
2. Training board.
3. Fault setting module.
Training Courses:
1. Understand the internal structure of electric vehicles;
2. Understand the function, working principle and structure of each system of electric vehicle;
3. Test and analysis of electrical signals of various internal systems of electric vehicles;
4. Fault diagnosis and analysis of various systems of electric vehicles;
5. Troubleshooting of various systems of electric vehicles.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
a. Truly operable automotive electronic and electrical system, fully demonstrating the composition and structure of automotive instrument system, lighting system, lighting system, wiper system, starting system, charging system and ignition system.Ã?Â
b. Operate various electrical switches and buttons to truly demonstrate the working process of automobile instrument system, lighting system, lighting system, wiper system, starting system, charging system and ignition system.Ã?Â
c. Each electrical component line terminal on the panel of the training platform is equipped with a measurement port. Refer to the supporting circuit diagram or maintenance data, and use oscilloscope, multimeter and other instruments to train the students' ability to recognize diagrams and measure various signals.Ã?Â
d. A detection terminal is installed on the panel of the training platform, which can directly detect the electrical signals of various circuit elements of the electrical system of the automobile body, such as resistance, voltage, current, frequency signals, etc.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
This product is suitable for colleges, vocational schools, and auto repair professional teaching. Through the demonstration or practical training of this product, you can master the structure and control of transmission, braking, steering, and suspension systems earlier. Its principle is to speed up scholars' understanding of the chassis system, and it is an ideal auxiliary understanding device for teaching in automobile schools.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1. Students can detect battery voltage, battery temperature and relay control signal by connecting the teaching board.
2. Students can read and clear fault codes for battery management system, read dynamic data flow, parameter setting and other diagnostic functions through the special decoder for new energy vehicles.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
a. Truly operable automotive electronic and electrical system, fully demonstrating the composition and structure of automotive instrument system, lighting system, lighting system, wiper system, starting system, charging system and ignition system.Ã?Â
b. Operate various electrical switches and buttons to truly demonstrate the working process of automobile instrument system, lighting system, lighting system, wiper system, starting system, charging system and ignition system.Ã?Â
c. Each electrical component line terminal on the panel of the training platform is equipped with a measurement port. Refer to the supporting circuit diagram or maintenance data, and use oscilloscope, multimeter and other instruments to train the students' ability to recognize diagrams and measure various signals.Ã?Â
d. A detection terminal is installed on the panel of the training platform, which can directly detect the electrical signals of various circuit elements of the electrical system of the automobile body, such as resistance, voltage, current, frequency signals, etc.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
The instruction and repair of exclusively electric cars is carried out �?Ã? ï¿½?Ã? ï¿½?Ã?Â
Set up training platforms with an intelligent teaching system. �?Ã? On the platforms, teachers can use robots for failing and real-time data detectors. �?Ã? The students also learn separately about the calculation figures sent to them: the system includes plugin-based systems, virtual online measurement software and online apps for mobile vehicles. �?Ã? ï¿½?Ã? ï¿½?Ã?Â
Hot Tags: new energy vehicle automobile vocational equipment drive system training bench, China, manufacturers, suppliers, engineering, OEM, ODM, Diesel Engine Stand Life Engine , automotive electronic training equipment, educational supply, anatomy model, transmission kit, Diesel Engine crdi 4 stroke Model
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
The Electric Vehicle Structure Trainer electric vehicle training equipment is designed to check the structure of electric vehicle with precision cutting.
Load of the vehicle is adjusted in accordance with the button, it is possible to load
on the wheel by the mounted electrical brake.
Battery parts are covered with the transparent PC cover to observe the internal structure.
Automatic transmission speed sensing, color display, vehicle defect state and basic diagnostic information (TPS, the accelerator signal sensors, etc.) are provided using vehicle specific diagnostic apparatus.
Hot Tags: electric vehicle structure trainer electric vehicle training equipment, China, manufacturers, suppliers, engineering, OEM, ODM, 4 cylinders gasoline engine, auto accessory, petrol engine hand practice, car teaching equipment of hybrid system, Ignition And Charging System, laboratory testing equipment.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
The Electric vehicle car energy recovery system training device education vocational equipment can simulate the braking principle and braking energy recovery of electric vehicles when braking at different speeds, and collect and analyze the braking energy recovery when braking conditions change.
Training Courses
1. Familiar with the structure of the electric vehicle energy recovery system;
2. Familiar with the working principle of the energy recovery system of pure electric vehicles;
3. Simulate the energy recovery of electric vehicles at different speeds;
4. Simulate the energy recovery under different conditions;
5. Simulate the charging and discharging of the battery under different conditions.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
This Electric Car Battery Management System BMS Trainer Electric Vehicle Training Equipment Automotive Training Equipment Supplies is suitable for the management and maintenance training of new energy vehicle batteries in vocational and technical schools, colleges and universities, and training institutions.
Training Courses:
1. System function demonstration
2. Battery internal resistance measurement;
3. Battery capacity measurement;
4. Basic battery discharge experiment;
5. Different power discharge experiments;
6. Constant voltage discharge experiment;
7. BMS management system setting experiment;
8. Accelerator pedal measurement;
9. Motor speed measurement;
10. Motor drive signal waveform measurement;
11. Motor position signal waveform measurement;
12. Gear switch signal measurement;
13. Battery charging experiment;
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
Each system clearly demonstrates the construction principle and connection relationship of the various components of the electric vehicle, and use virtual software to teach ,enable students have intuitive understanding on main components of the electric vehicle and the whole vehicle theory; Equipped with OBD-II diagnosis socket ,which can be connected with dedicated or general car scanner for self diagnosis function like reading fault code, clearing fault, data stream reading etc .
Each independent training module can be interconnected with vehicle teaching assistant system through CAN-BUS to carry out whole vehicle inspection training;
Each training station can wirelessly connect new energy intelligent teaching training system to achieve interactive teaching, fault simulation , training, assessment and many other functions; Independent or combined module training project can be designed , effectively improve the training efficiency and teaching quality; applicable to training on the theory and maintenance of electric vehicles in all types of institutions ,vocational school, college, university.
Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
This Electric car motor cutaway application display training device vocational education equipment is based on five different types of anatomical motors used in the field of new energy, allowing students to easily understand the internal structure of the motor. The teaching equipment is suitable for teaching needs and maintenance training of new energy vehicle motor drive systems in vocational and technical schools, colleges and training institutions.
Training Courses
1. Understand the structure and principle of switched reluctance motor;
2. Understand the structure and principle of in-wheel motor;
3. Understand the structure and principle of asynchronous motor;
4. Understand the structure and principle of permanent magnet synchronous motor;
5. Understand the structure principle of brushed DC motor.
Product Function
1. The parallel driving practical training platform contains intelligent driving simulation system, business host, 50-inch high-definition display, parallel driving driving software, through the driving simulation system to remotely drive the wire-control chassis system and the unmanned education vehicle.
2.The parallel driving practical training platform connects with the unmanned vehicle through 5G network, ensures the safety and stability of remote driving under the environment of high bandwidth and hourly delay of the communication band, assists the automatic driving to solve the problem that the vehicle can seamlessly take over the vehicle when the automatic driving has multi-level faults, and completes the vehicle operation tasks.
Practical training functions:
1. Remote control system software installation and debugging.
2. Remote control module installation and testing.
3. Installation and debugging of vehicle camera.
4. Driving simulator operation and remote takeover.
Analyze and collect parallel driving system voltage and waveform through IOT control system.
With a variety of practical training functions:
1, can make transmission assembly, suspension system, steering system, brake system, front and rear axles and other disassembly, diagnosis, analysis of hands-on training;
2, simulate the adjustment of four-wheel alignment, gearshift mechanism, brake system operation, and can do the brake system emptying and leakage testing and other hands-on training;
3, can be used for comprehensive overall chassis maintenance disassembly, testing, debugging practice;
1.2, Table size: 1300*700mm, maximum lifting height: 1200mm.
1.3, The platform has a safety locking mechanism.
1.4 The maximum lifting weight is 1000KG.
1.5 The equipment adopts electric-hydraulic drive, which is easy to operate, and the equipment lifting is spiral-type structure.
1.6 The power of the whole machine is at least 1.5kw.
Input AC voltage: 220V
Output AC voltage: 220V
Output current: 32A (can be customized)
Input AC frequency: 50Hz±5Hz
[Physical Parameters]:
Use of environmental temperature: -20 ~ 50
Working humidity: 5%~95
Storage temperature: -30~70
Protection grade: IP54
