Lift Manufacturers in Delhi, Elevator Manufacturers in Delhi, Goods Lift Manufacturers & Supplier in Delhi, Lift Company, Companies in Delhi,
Lift Manufacturers in Delhi, Elevator Manufacturers in Delhi, Goods
Supplier: Lift And Elevator
Supplier: Lift, elevator
Services: Manufacturers
Description: 16-floors elevator access controller also known as smart card elevator access control system. It is used to lift hierarchical control, personnel up and down the elevator access control system products. It can be used to meet building service management company or management personnel access lift more efficient and safer management needs. The system set up by the addition of all the cardholder to enter the floor, carried out all floors access control. SA-EB16 status for different people with different floor privileges, you can specify a person who only can go to certain floors, certain floor or all floors, each floor through permissions management, there are some who can reach the floor, who can not reach some floors, and the controller may be authorized in accordance with time management. 1. Without the express elevator controller authorized offline operation, 2. An independent group of people can store 26,000 data records with 100,000 readers so that all staffs have access to data recorded floor to be found. 3. And the elevator Max to 16 floors, but can be extended with an expansion board supports up to 16 expansion board, and ultimately can manage a maximum of 32 floors 4. Supports RS485 and TCP/IP communication methods. 5. Providing two standard card reader interface, supporting 6. WG26,WG34,WG44 reader or fingerprint device. 7. All input/output of elevator controller energized dynamic protection and all relay outputs With transient over-voltage protection, supports fire input linkage. 8. Automatically search for and install controller 9. Remote open door, full card to open door 10. Running stable monitoring(voltage input, watchdog, operating days) 11. Time frame management 12. Limit the number of people inside door and region 13. Fire protection alarm 14. Access authentication methods setting 15. Anti-passback, interlock function
Description: 16-floors elevator access controller also known as smart card elevator access control system. It is used to lift hierarchical control, personnel up and down the elevator access control system products. It can be used to meet building service management company or management personnel access lift more efficient and safer management needs. The system set up by the addition of all the cardholder to enter the floor, carried out all floors access control. SA-EB16 status for different people with different floor privileges, you can specify a person who only can go to certain floors, certain floor or all floors, each floor through permissions management, there are some who can reach the floor, who can not reach some floors, and the controller may be authorized in accordance with time management. 1. Without the express elevator controller authorized offline operation, 2. An independent group of people can store 26,000 data records with 100,000 readers so that all staffs have access to data recorded floor to be found. 3. And the elevator Max to 16 floors, but can be extended with an expansion board supports up to 16 expansion board, and ultimately can manage a maximum of 32 floors 4. Supports RS485 and TCP/IP communication methods. 5. Providing two standard card reader interface, supporting 6. WG26,WG34,WG44 reader or fingerprint device. 7. All input/output of elevator controller energized dynamic protection and all relay outputs With transient over-voltage protection, supports fire input linkage. 8. Automatically search for and install controller 9. Remote open door, full card to open door 10. Running stable monitoring(voltage input, watchdog, operating days) 11. Time frame management 12. Limit the number of people inside door and region 13. Fire protection alarm 14. Access authentication methods setting 15. Anti-passback, interlock function 16. Read card inside and outside to open door 17. Video capture
Goods lifts The iso-max is a goods only lift with two fixed cabin areas of 1, 00 x 1, 40 m (capacity 300, 500, 750 and 1000 kg) or 1, 275 x 1, 50 m (capacity 750 and 1000 kg) and a variable cabin height from 1, 20 - 2, 00 m. Lift unit complies to eu-directive for machines and has a eu-declaration of conformity of german t_v hanover / sachsen-anhalt e.V. Compared to a similar hydraulic freight elevator the iso-max will offer you some significant advantages and savings: Corrosion-proof Self-supporting galvanized steel structure Shaft pit depth 270 mm only Machine room less lift Accessible spaces underneath the shaft possible Easy mounting steel shaft cladding deliverable (no fire protection) Space saving installation - compact construction Pre-assembled for easy installation No brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors Manual operated hinged doors, made of galvanized steel in accordance to din 18090, production controlled by t_v-authorities With side frames made of galvanized steel according to drawing Door locks type-tested by t_v-authorities Machine room door Double hinged door with sash lock With side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor ip 54 disc brake and hand wheel, 3 x 400 v /50 hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control with 24 v, safety circuit 230 v Pre-wired with plugs Adjustable and time-limited despatch delay device (1-5 s) Electronic overload contact Acoustic arrival signal Position indicator on each entrance Thermal motor protection as main switch pre-wired on control panel Machine room light with socket
Goods lifts ISO-MAX Capacity: 300 / 500 / 750 / 1000 kg The ISO-MAX is a goods only lift with two fixed cabin areas of 1,00 x 1,40 m (capacity 300, 500, 750 and 1000 kg) or 1,275 x 1,50 m (Capacity 750 and 1000 kg) and a variable cabin height from 1,20 - 2,00 m Lift unit complies to EU-Directive for machines and has a EU-Declaration of conformity of German T_V Hanover / Sachsen-Anhalt e.V. Compared to a similar hydraulic freight elevator the ISO-MAX will offer you some significant advantages and savings: corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Machine room door double hinged door with sash lock with side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller call and send control with 24 V, safety circuit 230 V pre-wired with plugs adjustable and time-limited despatch delay device (1-5 s) electronic overload contact acoustic arrival signal position indicator on each entrance thermal motor protection as main switch pre-wired on control panel machine room light with socket ISO-PM 1000 Capacity: 1000 kg Goods lift along directive 95/28/EG with max. 2 persons corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only cabin push button with send control - landing push buttons with call and send control machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) reducing of interference prone by setting a safety feature instead of cabin door space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffet 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides safety light curtain cabin light - cabin ventilation type tested safety gear special pushbuttons in cabin - emergency call - emergency light - prepared for outgoing emergency call special safety gear (type tested) special cabin apron (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Maintenance room door hinged door with sash lock with side frames made of galvanized steel Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V / 50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control Cabin push button with send control Landing push buttons with call and send control Micro-processor technique in controller cabinet Selector with absolute encoder
This kind of elevator can work normally in the shocking condition.It can also work under the adverse condition of temperature from -20¡æ to 50, the 100% max relative humidity and the max wind speed of 25/s.Port elevator can be installed and operate on damp sea surface in salt mist and quite adverse environment.As a result, the control system and the structure must be designed well. Applicable to:good resistant to moisture, salt mist, oil mist and dust.Enhance reliability and life span of the elevator.
This sort of elevator has few requirement for the kind, feature and sizes of materials , even can elevate material of abrade and high temperature material with temperature less than 250 degrees.The advanced designing principle guarantees the reliable operation of the complete machine.Model:d450 capacity(t/h):69.5/48.0 weight of elevator and chain per meter(kg/m):21.30 belt width(mm):500 belt layer:5 speed(m/s):1.25 n(t/min):37.5 max. Size(mm):55