Ysax Suction Diffuser

Dekelon paper machine for printing and writing paper production. It can be used to make A4 paper, newsprint paper, writing paper and more, in 50-300g/m² from wood pulp, waste paper, wood and other pulp. The design speed of this newsprint paper machine is 300m/min, and the breadth is 1092-4100mm. Structural Features of the Paper Machine 1. Headbox This paper making machine is designed with an open headbox, which is composed of the taper pipe, stepped diffuser, rectifier roll and box. The pulp distributor with a pore plate made of organic glass comes with three step diffusion. The top and lower lips of the slice are made with stainless steel. The top lip has full and local control. 2. Forming Section (Wet End) The fourdrinier table has a length of 18,000mm. With the exception of the bearing block, which is made of aluminum alloy, the rack is completely constructed from structural steels by welding, and covered by a layer of stainless steel at a 1.5mm width. The forming section of the paper machine consists of the breast roller, forming board, foils, suction boxes, vacuum couch roller, electric wire tightener, pneumatic corrector, and edgy warping device. 3. Press Section In the press section, the fourdrinier machine uses a vacuum suction pickup roller and three suction rolls. 4. Dryer Section This paper machine is equipped with 28 sets of f1500mm steam-heated cylinders and one f3000mm cylinder in the dryer section. Paper dryers are typically arranged in groups. The arrangement pattern is, in sequence: 6 dry cylinders, 6 dry cylinders, 8 dry cylinders, 1 dry cylinder, glue applicator and 8 dry cylinders. They are driven by a sealed gearbox and lubricated with a thin oil. 5. Drive and Control Section This paper machinery uses a sectional drive system composed of an AC variable frequency motor, reduction gearbox with a hard teeth surface, and universal spindle coupling. It comes with an all-digital closed loop control system. 6. Calender Press Polish and Rewinding Dekelon's printing and writing paper machine applies a super calender and horizontal paper winding machine.

Applications: Designed for delivering treated water (feedwater) at the pumping temperature of up to 438K (165C) into the fossil-fueled stationary boilers with absolute steam pressure of maximum 13.7 MPa (140 kgf/cm2). Capacity, Q = 100 m3/h, Head, H = 580 m, Speed of rotation, 2970 rpm, NPSHr = 4 m. The pump units shall be rigidly anchored to the foundation, and piping shall be also rigidly connected to the pumps. The pumps are motor-driven horizontal, centreline-supported, between-bearings multistage ring-section centrifugal pumps with single flow impeller arrangement. The pump casing comprises a suction casing, a delivery casing and a set of stage casings, which are concentrically aligned with respect to each other on rabbeted fits and are bolted together with tie bolts. Diffusers are built in the stage casings and delivery casing. The suction and delivery casings have flanged suction and discharge pump nozzles respectively, which are oriented vertically to the top. The rotor axial thrust is automatically balanced with a balance disc. In order to ensure a normal functioning of the balancing device, its chamber is to be communicated with the suction pipeline. A bearing end cover, fitted in the non-drive side bearing housing, has a shaft position indicator for sight control of the wear of balancing device surfaces and for restraining rotor axial displacements towards the delivery side. The pump rotor is carried by the plain bearings with ring lubrication. The design of pump shaft seal chambers provides both for housing mechanical seals and for packing the stuffing boxes, which are to fed with cooling liquid. Sense of rotation of shaft in all the pumps is counterclockwise, if viewed from the drive side.

2XA Series Rotary Vane Vacuum Pump This series of pumps are elementary equipment for pumping air from sealed vassels. It can be used alone, also can be used as the forepump, process pump or titanium pump of booster pump, roots vacuum pump, gas circulation cooling roots pump, oil diffusion pump, and molecular pump. It is applicable to vacuum coating, vacuum heat treatment, vacuum smelting, vacuum tube,bulb,refrigeration,chemicals,packing,forming,health and medical appliances,laboratory,vacuum drying machines and vacuum filtering. Features 1.The pump can work continuously in the temperature between 5 to 40 centigrade and inlet pressure less than 1330Pa. 2.Equipped with gas ballast valve to pump a little water vapor. It can last service life of the oil except the 2X-4A type. 3.Dedicated vacuum pump for making neon lights. 4.Many suction holes in the vacuum pump to save electricity. Cardboard box/pallet.

Supplier: Submersible pumps, deep well pumps, borehole submersible pumps, impellers, discharges, diffuser, strap, strainers, suction interconnector, pump shaft, water pumps
Services: Manufacturer

Stainless steel submersible pumps for 4'' 6'' 8'' , sized for connection to the motor according to nema standards Discharge head with bulit-in non-return valve All standard pumps are completely manufacturered out of stainless steel 304. Application for water supply /irrigation / civil /industrial municipal pressure boosting. Ranges: 4sp1, 4sp2, 4sp3, 4sp5, 4sp8, 4sp14, 6sp17, 6sp30, 6sp46, 6sp60, 8sp77, 8sp95. Flow rate up to 120 m3/hr, head up to 410 meters. Customized impellers, diffusers, strainers, straps etc.Are available and welcome always.

SUBMERSIBLE DEEP WELL PUMP END FOR SP SERIES 4 INCH, 6INCH, 8INCH. WITH VARIETY OF MODELS COVERING 4SP 01/02/03/05/08/14 M3 per hour, 6SP 17/30/46/60 m3 per hour, 8SP 77/95 m3 per hour. MATERIAL UNDER STAINLESS STEEL SUS304 and SUS316 MADE. FLOW RATES UP TO 120 m3 per hour HEAD UP TO 320 meters PH RANGE: FROM 6 TO 8 LIQUID TEMP. UP TO 35 celcius degree PACKAGE: 1PC /POLY BAG /NEUTRAL CARTON OR WOODEN CASE OR CYLINDER PACK GUARANTEE: 1YEAR FOB NINGBO PORT OR SHANGHAI PORT

Application : Domestic Water Supply, Pressure boosting system, Cooling Systems, Small Industrial Water Supply system, Garden / Fountains, RO Plants, Water Treatment and Purification FEATURES AND BENEFITS Suction and Delivery Chamber Cast Iron with anti corrosive coating Stainless Steel AISI 304 Impellers and Diffusers Stainless Steel Shaft AISI 410 Built in Winding Protector Insulation Class F / B TECHINICAL DATA POWER RANGE : 0.60kw – 1.50kw Flow max 140 lpm (8.4 m3 / hr) Head Max 60 m Suction Lift up to 7m Liquid Temp upto 50° C Motor2 pole Induction motor, 50 Hz, 2900 rpm, single phase 230 v + 5% - 15% Double sealed ball bearings

Name:API610 BB3 Multistage Horizontal Split Pump CHARACTERISTICS Axially split, horizontal multistage centrifugal pump Near-centerline mounted Diffuser casing Single suction, enclosed impeller Thrust compensation by opposed impeller groups Side-Side nozzle arrangement Materials of construction per API 610, other materials on request DESIGN FEATURES Heavy duty process design according to API 610 latest edition (BB3 type) Ring oil lubrication, other methods of lubrication available Replaceable wear rings for casing and impeller Fan and water cooling available OPERATING LIMITS Capacity 50 to 3,000 m³ /h Head 200 to 3,000 m Discharge flange size 3 to 14 in Max. Pressure 35Mpa Temperature up to 205°C APPLICATIONS Oil fields and terminals Crude oil and oil product pipelines Water pipelines Fluid injection High pressure services Power plants

Name:api610 bb5 multistage barrel pumps Characteristics Radially split, horizontal multistage centrifugal pump Centerline mounted Diffuser casing Single / double suction, enclosed impeller thrust compensation by balance drum or rotor design with opposed impellers available top-top nozzle arrangement Materials of construction per api 610, Other materials on request Design features Heavy duty process design according to api 610 latest edition (bb5 type) Ring oil lubrication, other methods Of lubrication available Cartridge pull out design available Sleeve / tilt pad bearings design available replaceable wear rings for casing and impeller alternate nozzle arrangements available Fan cooling available Special design for decoking service available low npsh double suction design available Operating limits Capacity up to 2, 000 Head up to 4, 572 m Discharge flange size 2 to 12 in max. Pressure 30mpa Temperature 450 Applications Hydrocarbons chemical solutions water Seawater Decoking jet service charge pumps descaling service pumps