Features and Benefits
Orifice calculated and processed according to international standard BS7350
Standard device dispense with extra proofread
Applicable Standards
Design standard: BS EN1042,
Face to face standard: BS EN1092
Technical Data
Nominal Diameter:DN65~DN600 (21 2"~24") Nominal Pressure: PN16
Temperature Range: -5C~85C
Suitable for: Water, ethylene glycol, non correction medium, etc.
S30 Series Rubber Expansion Joint PN10 Thread Double Ball Type
Features and Benefits
High impact resistance rubber with nylon wire and stainless steel wire, is able to bear high pressure flows without anyinfluence on the product tensile strength.
High reliability: 100000 times bending fatigue test, to make sure the long life cycle.
Applicable Standards
Connection standard: EN1092-2
Pressure test standard: EN12266, API598
Face to face standard: Conex |Banninger Standard
Technical Data
Nominal Diameter:DN15~DN80(1/2"~3")
Nominal pressure: PN 10
Temperature range: -5C ~ 85C
Vacuum degree: 250mmHg
Explode pressure: 3MPa
Suitable for: Water, ethylene glycol,non correction medium, etc.
Connection type: Thread connection
Features and Benefits
Angle type structure
Internal rectifier
Screen is punched stainless steel plate
Large filter area: lower pressure drop
Electrostatically applied Akzo Nobel epoxy powder internally and externally
Applicable Standards
Flange standard: BS EN1092-2
Face to face standard: BS EN558-1
Technical Data
Nominal Diameter:DN50~DN600 (2"~24") Nominal Pressure: PN16
Temperature Range: -5 C~85 C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non-correction medium, etc.
Technical Data
Nominal diameter: DN50~DN600(2"~24") Nominal pressure: PN16
Working temperature: -5C ~ +85C Sealing test:1.1PN
Shell test:1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Technical Data
Nominal diameter: DN200~DN600 (8"~24") Nominal pressure: PN16
Working temperature: -5C ~ +85C
Sealing test:1.1PN
Shell test:1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Features and Benefits
Wider EPDM seat, replaceable, its suit for different type of flanges.
ISO5211 standard top flange, suit for different operations.
Eccentric pin on the stem, not destroy stem structure, make sure the safety.
Temperature overload protection.
Free switch between hand and electric.
IP67 protection level.
Both ON/OFF type and Regulating type actuator
available.
Technical Data
Nominal diameter: DN50~DN600(2"~24") Nominal pressure: PN16
Working temperature: -5C ~ +85C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Power supply voltage: 220V
Protection level: IP67
Environment temperature: -5C ~ 70C Working environment: No corrosive flammable medium, no explosive medium
Features and Benefits
Wider EPDM seat, replaceable, its suit for different type of flanges.
ISO5211 standard top flange, suit for different operations.
Eccentric pin on the stem, not destroy stem structure, make sure the safety.
Temperature overload protection.
Free switch between hand and electric.
IP67 protection level.
Both ON/OFF type and Regulating type actuator
available.
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Technical Data
Nominal diameter: DN50~DN600(2"~24") Nominal pressure: PN16
Working temperature: -5C ~ +85C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Power supply voltage: 220V
Protection level: IP67
Environment temperature: -5 C ~ 70 C Working environment: No corrosive flammable medium, no explosive medium
Features and Benefits
O-ring stem sealing, low torque operation.
ISO5211 standard top flange, suit for different
operations.
Electrostatically applied Akzo Nobel epoxy
powder internally and externally.
Level operated: DN50-DN150
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Technical Data
Nominal diameter: DN50~DN150(2"~6") Nominal pressure: PN16
Working temperature: -5C ~ +85C Sealing test:1.1PN
Shell test:1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
O-ring stem sealing, low torque operation.
Streamlined stainless steel disc
ISO5211 standard top flange, suit for different
operations.
Electrostatically applied Akzo Nobel epoxy
powder internally and externally.
Gear operated: DN50-DN600
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Technical Data
Nominal diameter: DN50~DN600(2"~24") Nominal pressure: PN16
Working temperature: -5 C ~ +85C
Sealing test:1.1PN
Shell test:1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Vulcanized EPDM seat
Streamlined SS304 disc, corrosion resistant
ISO5211 standard top flange, suit for different
operations.
Both gear and lever operated are available.
Electrostatically applied Akzo Nobel epoxy
powder internally and externally.
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Technical Data
Nominal diameter: DN50~DN150 (2"~6") Nominal pressure: PN16
Working temperature: -5C ~ +85 C
Sealing test:1.1PN
Shell test:1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Vulcanized EPDM seat
Streamlined SS304 disc, corrosion resistant
ISO5211 standard top flange, suit for different
operations.
Both gear and lever operated are available.
Electrostatically applied Akzo Nobel epoxy
powder internally and externally.
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Technical Data
Nominal diameter: DN50~DN600(2"~24") Nominal pressure: PN16
Working temperature: -5 C ~ +85 C
Sealing test:1.1PN
Shell test:1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Vulcanized EPDM seat.
Streamlined DI+EPOXY disc, corrosionresistant.
ISO5211 standard top flange, suit for differentoperations.
Electrostatically applied Akzo Nobel epoxypowder internally and externally.
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Technical Data
Nominal diameter: DN200~DN600(8"~24") Nominal pressure: PN16
Working temperature: -5 C ~ +85 C
Sealing test:1.1PN
Shell test:1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Vulcanized EPDM seat.
Streamlined SS304 disc, corrosion resistant.
ISO5211 standard top flange, suit for different
operations.
Electrostatically applied Akzo Nobel epoxy
powder internally and externally.
Temperature overload protection
Free switch between hand and electric.
IP67 level protection
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Features and Benefits
Wider EPDM seat design, replaceable, its suit for different type of flanges.
Streamlined SS304 disc.
ISO5211 standard top flange, suit for different
operations.
Eccentric pin on the stem, not destroy structure
of the stem, make sure the safety and strength.
Signal feedback, with position indicator.
Applicable Standards
Design standard: BS5155, EN593, API609 Top flange standard: ISO5211
Flange standard: BS EN1092-2
Face to face standard: BS EN558-1 Pressure test standard: BS EN1074, API598
Technical Data
Nominal Diameter:DN50~DN250 (2"~10") Nominal Pressure: PN16
Temperature Range: -5 C ~ +85 C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
The double eccentric design offers an optimal sealing performance.
Smart stainless steel seat, very low torque - easy to be operated.
The EPDM rubber ring was fixed on the edge of the disc by the retainer ring, easy to be replaced.
Eccentric pin connect the disc and stem, not destroy the structure of the stem, make sure the safety and strength.
Applicable Standard
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: EN558-1 basic series 13 Top flange standard: ISO5211/1
Technical Data
Nominal Diameter: DN300~DN2400(12"~96") PN10 DN300~DN900(12"~36") PN16
Temperature range: -5 C ~ +85 C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
The double eccentric design offers an optimal sealing performance.
Smart stainless steel seat, very low torque - easy to be operated.
The EPDM rubber ring was fixed on the edge of the disc by the retainer ring, easy to be replaced.
Eccentric pin connect the disc and stem, not destroy the structure of the stem, make sure the safety and strength.
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Technical Data
Nominal Diameter: DN300~DN2400(12"~96") PN10 DN300~DN900(12"~36") PN16
Temperature Range: -5 C~85 C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Inside screw pattern with non rising stem
Designed in accordance with WRAS
requirements
Designed in accordance with BS EN 12288
High quality brass construction
Threads to BS EN 10226 (ISO7) or ISO228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (1 2" - 2") Nominal pressure: PN 16
Temperature range: -5 C ~ +85 C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Inside screw pattern with non rising stem
Designed in accordance with WRAS requirements
Designed in accordance with BS EN 12288
High quality brass construction
Threads to BS EN 10226 (ISO7) or ISO228
Magnetic lockable design, open/close by a special key
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (1 2"~2") Nominal Pressure: PN16
Temperature Range: -5 C ~ +85 C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Inside screw pattern with non rising stem
High quality bronze construction
Designed in accordance with BS EN 12288
Not suitable for high temperature working
Threads to BS EN 10226 (ISO7) or ISO228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (1 2"~2") Nominal pressure: PN 25
Temperature range: -5 C ~ +85 C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Inside screw pattern with non rising stem
Designed in accordance with WRAS
requirements
Designed in accordance with BS EN 12288
High quality lead free brass material, for
human health concern.
Threads to BS EN 10226 (ISO7) or ISO228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (1.2"~2") Nominal Pressure: PN16
Temperature Range: -5 C ~ +85 C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Inside screw pattern with non rising stem
Designed in accordance with WRASrequirements
Designed in accordance with BS EN 12288
High quality lead free brass material, for human health concern.
Threads to BS EN 10226 (ISO7) or ISO228
Extension body design, suit for different length installation
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (1 2"~2") Nominal Pressure: PN16
Temperature Range: -5 C~85 C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
NRS Gate Valve PN16 Flanged Resilient Seated BS5163 Type
Features and Benefits
3 O-ring sealing, zero leakage, safe and reliable.
Fully vulcanized wedge, corrosion resistant.
Wedge with plastic guide rail on two sides, reduces friction, reduces torque.
Full bore, resilient seated, no water head lost.
Electrostatically applied Akzo Nobel epoxy powder internally and externally.
Applicable Standards
Flanges standard: BS EN 1092-2.
Design standard: BS 5163
Face to face standard: BS EN 558-1 base series 3 Pressure test standard: BS EN12266-2003
Technical Data
Nominal Diameter:DN50~DN600(2"~24") Nominal pressure: PN 16
Temperature range: -5 C ~ +85 C
Suitable for: Water, ethylene glycol, non correction medium, etc.
RVHX F4 Series NRS Gate Valve PN16 Flanged Resilent Seated DIN3202 F4 type
Features and Benefits
3 O-ring sealing, zero leakage, safe and reliable.
Fully vulcanized wedge, corrosion resistant.
Wedge with plastic guide rail on two sides, reduces friction, reduces torque.
Full bore, resilient seated, no water head lost.
Electrostatically applied Akzo Nobel epoxy powder internally and externally.
Applicable Standards
Flanges standard: BS EN 1092-2.
Design standard: DIN 3352-4
Face to face standard: DIN 3202 F4 Pressure test standard: BS EN12266-2003
Technical Data
Nominal Diameter:DN50~DN300(2"~12") Nominal pressure: PN 16
Temperature range: -5 C ~ +85 C
Suitable for: Water, ethylene glycol, non correction medium, etc.
RVRX OS&Y Gate Valve PN16 Flanged Resilient Seated EN1171 Type
Features and Benefits
3 O-ring sealing, zero leakage, safe and reliable.
Fully vulcanized wedge, corrosion resistant.
Wedge with plastic guide rail on two sides, reduces friction, reduces torque.
Full bore, resilient seated, no water head lost.
Electrostatically applied Akzo Nobel epoxy powder internally and externally.
Applicable Standards
Design standard: BS EN 1171
Flanges standard: BS EN 1092-2
Face to face standard: BS EN 558-1 base series 3 Pressure test standard: BS EN12266-2003
Technical Data
Nominal Diameter:DN50~DN300(2"~12") Nominal pressure: PN 16
Temperature range: -5C ~ +85C
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
3 O-ring sealing, zero leakage, safe and reliable.
Fully vulcanized wedge, corrosion resistant.
Wedge with plastic guide rail on two sides, reduces friction, reduces torque.
Full bore, resilient seated, no water head lost.
Electrostatically applied Akzo Nobel epoxy powder internally and externally.
Stem cap for buried application, T-Keyoperated.
Applicable Standards
Flanges standard: BS EN 1092-2.
Design standard: BS 5163
Face to face standard: BS EN 558-1 base series 3 Pressure test standard: BS EN12266-2003
Technical Data
Nominal Diameter:DN50~DN600(2"~24") Nominal pressure: PN 16
Temperature range: -5 C ~ +85 C
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
3 O-ring sealing, zero leakage, safe and reliable.
Fully vulcanized wedge, corrosion resistant.
Wedge with plastic guide rail on two sides, reduces friction, reduces torque.
Electrostatically applied Akzo Nobel epoxy powder internally and externally.
Magnetic lockable design, open/close by a special key
Applicable Standards
Flanges standard: BS EN 1092-2.
Design standard: BS 5163
Face to face standard: BS EN 558-1 base series 3 Pressure test standard: BS EN12266-2003
Technical Data
Nominal Diameter:DN50~DN300(2"~12") Nominal pressure: PN 16
Temperature range: -5~85C
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
3 O-ring sealing, zero leakage, safe and reliable.
Fully vulcanized wedge, corrosion resistant.
Wedge with plastic guide rail on two sides, reduces friction, reduces torque.
Full bore, resilient seated, no water head lost.
Spigot end connection, for quick joint.
Stem cap for buried application, T-Key operated.
Applicable Standards
Spigot End Standard: DIN EN 12763 Design standard: BS 5163
Face to face standard: DIN3202 F5 Pressure test standard: BS EN12266-2003
Technical Data
Nominal Diameter:DN50~DN300(2"~12") Nominal pressure: PN 16
Temperature range: -5 C ~ +85 C
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
3 O-ring sealing,O leakage ,safe and reliable
Fully vulcanized wedge,corrosion resistant
Wedge with plastic guide rail on two sides, reduces friction, reduces toquet
Full bore ,resilient seated ,no water head lost
Electrostatically applied AKzo Nobel epoxy powder internally and externally
Hand wheel operated with signal feedback device.
Applicable Standards
Design standard: BS5163 , AWWA C509 Flanges standard: BS EN1092-2, ASME B16.1, ASME B16.42
Face to face standard:BS EN558-1, ASME B16.10
Pressure test standard: BS EN1074, API 598
Technical Data
Nominal Diameter:DN50~DN250 (2"~10") Nominal Pressure: PN16
Temperature Range: -5 C ~ +85C
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Designed in accordance with WRAS requirements
High quality brass construction
Not suitable for high temperature working
Threads to BS EN 10226 (ISO7) or ISO228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (12"~2") Nominal pressure: PN 16
Temperature range: -5C ~ +8C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Designed in accordance with WRAS requirements
High quality bronze construction
Not suitable for high temperature working
Threads to BS EN 10226 (ISO7) or ISO228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (1 2"~2") Nominal pressure: PN 16
Temperature range: -5 C ~ +85C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Designed in accordance with WRAS requirements
High quality lead free brass material, for human health concern.
Threads to BS EN 10226 (ISO7) or ISO228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (12"~2") Nominal Pressure: PN16
Temperature Range: -5 C ~ +85 C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Designed in accordance with WRAS requirements
High quality brass material.
Threads to BS EN 10226 (ISO7) or ISO228
Long neck design, for insulations purpose.
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (1 2"~2") Nominal Pressure: PN16
Temperature Range: -5C~85C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Provides accurate regulations and control of flow.
Rising stem design.
High quality brass construction
Threads to BS EN 10226 (ISO7) or ISO228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (1 2"~2") Nominal pressure: PN 16
Temperature range: -5C ~ +85 C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Provides accurate regulations and control of flow.
Rising stem design.
High quality bronze construction
Threads to BS EN 10226 (ISO7) or ISO228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (12"~2") Nominal pressure: PN 16
Temperature range: -5C ~ +85C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Swing type disc
High quality brass construction
Threads to BS EN 10226 (ISO7) or ISO228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (12"~2") Nominal pressure: PN 16
Temperature range: -5C ~ +85C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Swing type disc
High quality bronze construction
Threads to BS EN 10226 (ISO7) or ISO228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (1 2"~2") Nominal pressure: PN 16
Temperature range: -5 C ~ +85 C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
The spring load design, reduces the water hammer, no noise.
Axial flow design insures, short stroke, quick close to the seat.
High quality spring, avoid the water hammer to damage the pipeline.
Can be installed in anyposition, including vertical with flow up or down.
Applicable Standards
Connection standard: BS EN 1092-2
Pressure test standard: BS EN 12266-2003
Face to face standard: BS EN558: 2008
Technical Data
Nominal Diameter:DN50~DN900(2"~36") Nominal pressure: PN 16
Temperature range: -5 C ~ +85 C
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Flexible disc fully vulcanized with EPDM rubber assures positive sealing at high and low pressures.
15 sealing angle between the disc and seat can ensure low pressure sealing.
Electrostatically applied Akzo Nobel epoxy powder internally and externally.
Applicable Standards
Connection standard: BS EN 1092-2
Pressure test standard: BS EN 12266-2003
Face to face standard: BS EN558: 2008
Technical Data
Nominal Diameter:DN50~DN300(2 ~12") Nominal pressure: PN16
Temperature range: -5 C ~ +85 C
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Dual plates disc design
The valve can be installed horizontally or vertically.
High temperature vulcanization sealing ring.
Electrostatically applied Akzo Nobel epoxy powder internally and externally.
Applicable Standards
Connection standard: BS EN 1092-2
Pressure test standard: BS EN 12266-2003
Face to face standard: BS EN558: 2008
Technical Data
Nominal Diameter:DN50~DN600(2"~24") Nominal pressure: PN 16
Temperature range: -5 C ~ +85 C
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Axial-flow type.
Loss-less design.
Small bulk , light weight.
Applicable Standards
Manufacturing standard: AWWA C510
Structure length standard: BS EN 558
Flange joint standard: BS EN 1092-2 Seals standard: BS EN12266-1, API598
Technical Data
Nominal diameter: DN50~DN300(2"~12") Nominal pressure: PN16
Working range: -5C ~ 85C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Streamed-lined design in order to minimise pressure drop
Stainless steel mesh
Brass body with streamlined internal contour to minimise pressure drop across valve
Robust and compact design
Threads in accordance with BS EN 10226 (ISO7) or ISO 228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (12"~2") Nominal pressure: PN 16
Temperature range: -5C ~ +85C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Streamed-lined design in order to minimise pressure drop
Stainless steel mesh
Bronze body with streamlined internal contour to minimise pressure drop across valve
Robust and compact design
Threads in accordance with BS EN 10226 (ISO7) or ISO 228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (12"~2") Nominal pressure: PN 16
Temperature range: -5 C ~ +85 C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Streamed-lined design in order to minimise pressure drop
Stainless steel mesh
Bronze body with streamlined internal contour to minimise pressure drop across valve
Robust and compact design
Threads in accordance with BS EN 10226 (ISO7) or ISO 228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (1 2"~2") Nominal pressure: PN 16
Temperature range: -5 C ~ +85 C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Screen is punched stainless steel plate
Screen is supported by screen support for DN150 and above, this device protects the
screen from potential damage.
Large filter area: lower pressure drop.
Electrostatically applied Akzo Nobel epoxy powder internally and externally.
Applicable Standards
Connection standard: BS EN 1092-2
Pressure test standard: BS EN 12266-2003
Face to face standard: BS EN558-1 Series1
Technical Data
Nominal Diameter:DN50~DN400(2"~16") Nominal pressure: PN 16/25
Temperature range: -5C ~ +85 C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Body and cover are in ductile iron for long product life cycle.
Screen is punched stainless steel plate.
Basket design, has large filter area, lower pressure drop.
Easy for clean screen, easy for installation.
Applicable Standards
Connection standard: BS EN 1092-2
Pressure test standard: BS EN 12266-2003
Technical Data
Nominal Diameter:DN50~DN750(2"~30") Nominal pressure: PN16
Temperature range: -5 C ~ 85 C
Suitable for: Water, ethylene glycol, non-correction medium, etc.
Features and Benefits
Direct reaction design, high accuracy of pressure adjustment.
Diaphragm type, quick response against pressure change.
Big inner chamber, avoid noise.
Inlet pressure balancing function, fluctuating inlet pressure doesnot influence outlet pressure.
Stainless steel and bronze parts, corrosion resistant.
If required, pressure gauge can be installed.
Applicable Standards
Connection Standard: BS 21 BS EN10226-1
Test Standard: BS EN12266-2003
Technical Data
Nominal Diameter:DN15~DN40(1/2"~11/2") Nominal pressure: PN 16
Temperature range: -5 C ~ +85 C
Input Pressure: 1.6MPa
Output Pressure: 0.1MPa~0.5MPa
Sealing Test: 1.1PN
Shell Test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Direct reaction design, high accuracy of pressure adjustment.
Diaphragm type, quick response against pressure change.
Big inner chamber, avoid noise.
Inlet pressure balancing function, fluctuating inlet pressure doesnot influence outlet pressure.
Stainless steel and bronze parts, corrosion resistant.
If required, pressure gauge can be installed.
Stainless Steel Body
Applicable Standards
Connection Standard: BS 21 BS EN10226-1
Test Standard: BS EN12266-2003
Technical Data
Nominal Diameter:DN15~DN40(1/2"~11/2") Nominal pressure: PN 16
Temperature range: -5~85C
Input Pressure: 1.6MPa
Output Pressure: 0.1MPa~0.5MPa
Sealing Test: 1.1PN
Shell Test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Automatic control valve, running by itself.
One complete combined disc, easy for maintenance.
Diaphragm type, quick response against pressure change.
Big inner chamber, avoid noise by cavitations and reduce static pressure.
Main body and floating ball split installation.
Applicable Standards
Flange standard: BS EN 1092-2
Face to face standard: EN558 Series 10
Technical Data
Nominal Diameter:DN50~DN400(2"~16") Nominal pressure: PN 16
Temperature range: -5C ~ +85C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Automatic control valve , running by itself.
One complete combined disc, easy for maintenance.
Diaphragm type; zero friction, quick response against pressure change.
The close time can be adjustable; can reduce the damage of water hammer and low noise.
Applicable Standards
Flange standard: BS EN 1092-2
Face to face standard: EN558 Series10
Technical Data
Nominal Diameter:DN50~DN400(2"~16") Nominal pressure: PN 16
Temperature range: -5C ~ +85C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Automatic control valve, running by itself.
One complete combined disc, easy for maintenance.
Diaphragm type; quick response against pressure change.
Big inner chamber, avoid noise by cavitations and reduce static pressure.
Inlet pressure balancing function, fluctuating inlet pressure doesnot influence outlet pressure.
Stainless steel and bronze parts, corrosion resistant.
Reinforced Nylon + EPDM diaphragm has long lift
Applicable Standards
Flange standard: BS EN 1092-2
Face to face standard: EN558 Series10
Technical Data
Nominal Diameter:DN50~DN400(2"~16") Nominal pressure: PN 16
Temperature range: -5C ~ +85C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Automatic control valve, running by itself.
One complete combined disc, easy for maintenance.
Diaphragm type; quick response against pressure change.
Relieving pressure can be adjusted.
Once Pipeline system pressure less than the discharge pressure, valve will be switch off quickly.
Applicable Standards
Flange standard: BS EN 1092-2
Face to face standard: EN558 Series10
Technical Data
Nominal Diameter:DN50~DN400(2"~16") Nominal pressure: PN 16
Temperature range: -5C ~ +85C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Automatic control valve , running by itself.
One complete combined disc, easy for maintenance.
Diaphragm type; zero friction, quick response against pressure change.
The control precision of pressure difference ±5%
Applicable Standards
Flange standard: BS EN 1092-2
Face to face standard: EN558 Series10
Technical Data
Nominal Diameter:DN50~DN300(2"~12") Nominal pressure: PN 16
Temperature range: -5C ~ +85C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Control the water flow running inter-collide inside the valve channel, inter-reaction the power, lower down the noisy, avoid cavitations corrosion.
Counter balance structure, reduce the operation torque under high pressure and high flow rate.
Linear regulation design cage disc, 100% linearly modulate the flow rate, for different application requirement.
Metal to metal sealing, smooth surface finish 0.8m, 0 leakage sealing.
Inner material stainless steel, corrosion resistant, long life cycle.
Bronze bushing, self-lubricating, reduce friction, lower the torque.
Flow rate regulating, pressure modulating, fluid level control, and water draining function.
Variety operation solution, gear box, pneumatic actuator and motor operation are all available, with customized control device depending on operating conditions.
Low actuating torque due to pressure balanced valve piston.
Rotationally symmetrical flow guidance.
Applicable Standards
Flange dimension in accordance with BS EN 1092-2
Face to face dimension in accordance with BS EN 558-1 basic series 3
Technical Data
Nominal Diameter:DN250~DN1600 (10"~64") Maximum Working pressure: 16 bar
Working temperature: -5 ~ 85 C
Shelling Test: 1.5PN
Sealing Test: 1.1PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Bronze body material, corrosion resistant.
Shut off zero leakage, safe and reliable.
Lockable position, avoids errors operation.
Variable orifice body, accurate regulation, easy for pre-setting and reduces commissioning costs.
Pressure tapping points available for different flow testing equipment.
Applicable Standards
Product standard: BS 7350: 1990
Connection standard: BS EN 102261
Pressure test standard: BS EN 12266-2003
Technical Data
Nominal Diameter:DN15~DN50(1/2"~2") Nominal pressure: PN 25
Temperature range: -5C ~ +85C
Minimum shell test pressure: 37.5 bar
Minimum seat test pressure: 27.5 bar
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Designed and manufactured in accordance with BS 7350: 1990.
Designed with multiple pressure tapping point for flow testing equipments.
Manufactured with a lockable handle wheel for added protections.
Available with an orifice body for accurate regulation and pre setting features.
Designed to reduce commissioning cost.
Applicable Standards
Product standard: BS 7350: 1990
Flanges standard: BS EN 1092-2
Face to face standard: BS EN 558-1
Technical Data
Nominal Diameter:DN65 ~ DN300 (21/2"~12") Nominal pressure: PN 16
Temperature range: -5C ~ +85C
Shell test pressure: 1.5PN
Seat test pressure: 1.1PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Axial flow design, counterbalances the pressure on disc, reliable the flow rate.
Cartridge disc design fixed on the core plate, liner adjust of the flow rate.
Stainless steel disc, for long life cycle and easy for maintenance.
Small tolerance and accurate regulation, easy for pre-setting and reduces commissioning costs.
Applicable Standards
Flanges standard: BS EN 1092-2
Face to face standard: BS EN 558-1
Technical Data
Nominal Diameter:DN50~DN600(2"~24")
Nominal pressure: PN16/25
Temperature range: -5C ~ +85C
Shell test pressure: 1.5PN
Seat test pressure: 1.1PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
PDRV Series Wire Port Type Adjustable Differential Pressure Controller
Features and Benefits
Differential pressure control accuracy in 5%
The pressure differential data of the products should be set in advance during production: P=12/15/20/40/60/100KPa
Applicable Standards
Face to face standard: ISO228
Pressure test standard: ISO5208
Technical Data
Nominal Diameter:DN15~DN40 (1 2"~11 2") Nominal Pressure: PN16
Temperature Range: -5C~85C
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Differential pressure control accuracy in 5%
The pressure differential data of the products should be set in advance during production: P=12/15/20/40/60/100KPa
Applicable Standards
Face to face standard: BS EN1092, ANSIB16.42
Pressure test standard: ISO5208
Technical Data
Nominal Diameter:DN50~DN150 (2"~6")
Nominal Pressure: PN16
Temperature Range: -5C~85C
Suitable for: Water, ethylene glycol, non correction medium, etc.
T2SX Series Temperature Control Valve Electrothermal Type PN16
Features and Benefits
Push fit connection between the valve and actuator, quick for assembly and disassembly
Electrothermal actuator, running silent.
Zero leakage when pressure difference below 350KPa.
Fist time running, fully open.
Actuators made in Germany.
Used in FCU system
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN20/25(3/4"/1") Nominal pressure: PN 16 Temperature range: --5~85C Voltage: AC220V±10%, 50/60Hz Power: 1.8W
Thrust: 100N
Stroke: 4mm
Open close cycle: About 3 minutes Connection dimension: M30 1.5mm Temperature: 0C~60C
Wire length: 1.2m
Wire standard: 2 -0.75mm2PVC
TTSE Series PN25 ON/OFF Type TTSX Series PN25 Regulating Type Temperature Control Valve
Features and Benefits
Ball valve body, quarter turn.
Screw connection between the valve and actuator.
A.C. synchronous motor, two line type, easy for installation.
Zero leakage when pressure difference 600KPa.
0(2)-10 V or 0(4)-20mA input signal.
Used in AHU system
Applicable Standards
Connection Standard: ISO228
Technical Data
Nominal Diameter:DN25~DN50 (1-2)
Nominal pressure: PN 25
Temperature range: -5~85C
Suitable for: Water and neutral liquid
Voltage: ON/OFF: AC220V 50/60Hz
Regulating: AC 24V 50/60Hz
Power Consumption: ON/OFF: 5VA Regulating: 4VA
Control Signal: ON/OFF: On Off signal Regulating: 0(2)-10V, 0(4)-20mA
Regulating return signal: 0-10V
Running time: DN15~25 45 seconds
DN32~50 60 seconds
Wire connection spec: 0.5~1mm2
Level of protection: IP54
TBSX Series Temperature Control Valve Dynamic Balance Type PN16
Features and Benefits
Two function in one: control + constant flow rate.
Push fit connection between the valve and actuator, quick for assembly and disassembly.
Electrothermal actuator, running silent.
Flow rate not affected by pressure changed.
Fist time running, fully open.
Actuators made in Germany.
Used in FCU system
Applicable Standards
Threaded Standard: ISO 228
Technical Data
Nominal Diameter:DN20/25(3/4"/1")
Nominal pressure: PN16 Temperature range: -5~85C
Voltage: AC220V±10%,50/60Hz
Flow rate tolerance: ±5%
Suitable for: Water
Voltage: AC220V�±10%,50/60Hz
Power: 1.8W
Thrust: 100N
Route: 4mm
Open close cycle: 3 minutes
Connection dimension: M30 1.5mm
Temperature: 0 C~60 C
Wire length: 1.2m
Wire standard: 2 0.75mm2PVC
Features and Benefits
Three function in one: Electric Adjustment + Pressure Independence + Static Balancing
A linear flow control can be realized
Uses the straight travel plug disc, lower torque
Adjustable Kvs, maximum flow can be controlled
Large range of differential pressure control and flow control precision.
Used in AHU system
Applicable Standards
Design standard: Q/IBP 1-0001-2014
Threaded Standard: EN 10226.1~10226.2 ISO228
Face to face standard: BS EN558-1
Technical Data
Nominal Diameter:DN32~DN50 (11 4"~2")
Nominal Pressure: PN16
Temperature Range: -5C~85C
Sealing test:1.1PN
Shell test: 1.5PN
Suitable for: water
Voltage: AC24V
Power: 2VA
Cut-off force: 500N
Max stroke: 10mm
Input signal: 0(2)~10V, 0(4)~20mA Feedback signal: 0~10V
Protect level: IP40
Features and Benefits
Three function in one: Electric Adjustment + Pressure Independence + Static Balancing
A linear flow control can be realized
Uses the straight travel plug disc, lower torque
Adjustable Kvs, maximum flow can be controlled
Large range of differential pressure control and flow control precision.
Used in AHU system
Applicable Standards
Design standard: Q/IBP 1-0001-2014
Threaded Standard: EN 10226.1~10226.2 ISO228
Face to face standard: BS EN558-1
Technical Data
Nominal Diameter:DN65~DN150 (21 2"~6")
Nominal Pressure: PN16
Temperature Range: -5C~85C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: water
Voltage: AC24V
Power: DN65~DN100 4.2VA
DN125~DN150 10.6VA
Cut-off force: DN65~DN100 850N
DN125~DN150 2200N
Max stroke: DN65~DN100 20mm
DN125~DN150 30mm
Input signal: 0(2)~10V, 0(4)~20mA
Feedback signal: 0~10V
Protect level: IP54
Features and Benefits
Robust and compact design, high quality brass construction, valves have long life cycle.
Thread in accordance with BS EN 10226(ISO7) or ISO228
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN50 (1 2"~2") Nominal pressure: PN 16
Temperature range: -5C ~ +85C Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Screw connection
Self sealing design, low maintain cost
Applicable Standards
Connection standard: ISO228
Test standards: ISO 5208
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN15~DN25 (1 2"~1")
Nominal pressure: PN 16
Temperature range: -5C ~ 85C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Combination Air Valves perform the functions of an Air/Vacuum Valve and Air Release Valves to maintain system efficiency and prevent pipeline surges.
Able to release air at high flow rates.
High sensitivity: when negative pressure occurs inside pipelines, valves rapidly open to inhale large volumes of air and protect the pipelines from damage.
Floating ball and main disc are in stainless steel.
This provides long service life, safety and reliability.
Applicable Standards
Flange Standard: EN1092-2
Design Standard: AWWA C512
Features and Benefits
Wider EPDM seat design, replaceable, its suit for different type of flanges.
ISO5211 standard top flange, suit for different operations.
Eccentric pin on the stem, not destroy structure of the stem, make sure the safety and strongth.
Lever operation BWLX: DN50~DN150.
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Technical Data
Nominal diameter:DN50~DN150(2"~6") Nominal pressure: PN16
Working temperature: -5C ~ +85C Sealing test:1.1PN
Shell test:1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
S10 Series Rubber Flexible Joint PN16 Flanged Single Ball Type
Features and Benefits
High impact resistance rubber with nylon wire and stainless steel wire, is able to bear high pressure flows without anyinfluence on the product tensile strength.
High reliability: 100000 times bending fatigue test, to make sure the long life cycle.
Flexible rubber, to protect the pipeline from shake.
Applicable Standards
Connection standard: EN1092-2
Pressure test standard: EN12266, API598
Face to face standard: Conex Banninger Standard
Technical Data
Nominal Diameter:DN50~DN600(2"~24")
Nominal pressure: PN16
Temperature range: -5C ~ 85C
Suitable for: Water, ethylene glycol,non correction medium, etc.
Burst test pressure: 60Kgf/cm2 (DN50~DN200), 40Kgf/cm2 (DN250~DN600)
Features and Benefits
High impact resistance rubber with nylon wire and stainless steel wire, is able to bear high pressure flows without any influence on the product tensile strength.
Soft stainless steel mesh wire, for long life systole
Applicable Standards
Connection standard: EN1092-2
Face to face standard: Conex |Banninger Standard
Technical Data
Nominal Diameter:DN32~DN400(1 1/4"~16") PN10
Nominal Diameter:DN65~DN400(2 1/2"~16") PN16
Temperature range: -5C ~ 85C
Bellows type: A
SS mesh wire type: S
Suitable for: Water, ethylene glycol, non correction medium, etc.
Connection type: Thread connection
Features and Benefits
Humanization user interface design easy to adjust.
Interactive software, built-in sensors, configuring balance programs, ensure system adjust completed quickly and exactly.
Low energy consumption wireless communications, sensors can work 35 hours continuously after charged, ensure reliable and continuously process of adjust.
Based on Banninger valve develop an Android fluid measure app system, easy to handle
Technical Data
Total pressure within range: Maximum 2500KPa
Different of pressure: 0-1000KPa
Static pressure: <1000KPa
Deviation of measure: Differential of pressure < Full range 0.1%
Hand set: Battery: 1200 MAH; Operating time: 8 hours, continuously; Charging time: 1.4 hours Sensor of differential pressure: Battery: 6600 MAH
Sensor of differential pressure: Operating time: 35 hours, continuously
Sensor of differential pressure: Charging time: >90%,4 hours
Operate and charge: 0C~40C
Storage temperature: -20C~60C
Ambiance temperature: Maximum 90% relative humidity
Weight: Sensor of differential pressure: 0.5KG
Weight: Entire tool bag: 2.8KG
Bluetooth range: <200m