Ceramic Fiber product is made from long flexible bulk fiber which is a high temperature fire resistance material containing of pure alumina, silica & zirconia. It is used for various applications some of are reformer of furnace, tube seal, gasket & expansion joint, high temperature pipe, duct, turbine insulations, kiln car insulations & seals, boiler insulation and many more insulation purposes.
Fiber Board
Classification Temperature : 1260C & 1430C Density : 300kg/m3 - 400kg/m3 Thickness : 6mm - 10mm - 20mm - 25mm - 50mm
GENERAL INFORMATION: CMAX ceramic fiber boards are manufactured in a wet vacuum forming process by blending the chopped ceramic fiber with inorganic or organic binders for excellent abrasive resistance at high temperature. CMAX ceramic fiber boards feature low thermal conductivity, high thermal stability and excellent thermal shock resistance. The products are classified as STD, HP, HA and HZ respectively corresponding to different maximum service temperature 1000ºC, 1100ºC, 1200ºC and 1350ºC. Advantages: Low heat storage Low thermal conductivity Excellent abrasive resistance Excellent thermal shock resistance Excellent chemical stability Even density and thickness APPLICATION: Hot air duct lining Shuttle kiln with high gas velocity Laboratory furnace Kiln car insulation Die-cut high temperature seal Based on order, special sizes are available. This information, subject to change, is offered solely for your consideration. Users of our products should make their own tests to determine the suitability of each product for their particular purposes. Nothing contained in this brochure is to be understood as authorization or recommendation to use our products in the infringement of ant patent. 25X600X1000 50X600X1000
Ceramic fiber board
JIUQIANG Ceramic fiber board is featured with high temperature stability,low thermal conductivity,consistent density,and excellent resistance against thermal shock and chemical attack.Ceramic fiber board also resists oxidation and redution.Ceramic fiber board are available in a available in a variety of temperature ratings,densities,thicknesses,widths and lengths,and custom vacuum formed shapes.
Mineral fiber board We are a manufacturer of mineral fiber ceiling board & t-bar in china, and our products are mainly exported, which enjoy good reputation among our customer. Mineral fiber ceiling board Standard size: 595x595mm, 595x1195mm Thickness size : 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 15mm , 18mm, 20mm Further information please visit www.Hbshengxing.Com If you are interested in our products, please do not hesitate to contact us. Be sure you would get high quality at competitive price.
Ceramic Fiber Board Density: 260-320 kg/m ³ (16-20 lb/ft ³) Raw materials: Spun ceramic fiber bulk Thickness: 10mm, 20-50 mm Asbestos: 100% Non Asbestos Function: Refractory & Fireproof & Insulation ROSEWOOL ceramic fiber board is made of ceramic fiber cotton by the process of vacuum forming or dry process refined by dry and machining. It has good specialties of rigid ity flexibility heavy intensity anti-wind erosion, non-expansion, lightweight, and easy to construct. It can be cut and bent optionally. Thus, it is the practical and efficient material of kiln and furnace, pipe and other thermal insulation equipment. Ceramic Fiber Board Application 1. The wall liner and back lining materials of high-temperature reaction, reheating equipment and various industrial furnace such as used glass tempering furnace, pottery kiln, ceramic kiln and tunnel kiln 2. Insulating and fire proof plate of furnace door and roof or house chimney and fireplace 3. Lows fire proof and insulation for chimney cake ovens, pizza oven 4. Boilers and heater combustion chamber 5. Aluminum factories-reduction cell firebricks back linings 6. Ladle furnace backing 7. Shipping, aviation, precision industrial equipment 8. Refractory and thermal insulation material in kiln or furnace of construction industry for heating and wall liner of high-heat treatment
Mineral fiber board Dimensions: 600*600mm, 600* 1200mm Thickness: 10mm, 12mm, 14mm, 15mm, 18mm 15pcs/carton
Product Series YAOXING 1050 Ceramic Fiber Board YXTX-134 YAOXING 1260 Ceramic Fiber Board YXTX-234 YAOXING High Pure Ceramic Fiber Board YXTX-334 YAOXING High Aluminum Ceramic Fiber Board YXTX-434 YAOXING High Zirconium Ceramic Fiber Board YXTX-534. Description: 1.YAOXING 1050/1260 Ceramic Fiber Board was processed by the advanced production line, which was adopted the full automatic control and the continuous- processing method. 2.YAOXING 1050/1260 Ceramic Fiber Board have many typical characteristics, such as exact measurement£¬excellent toughness£¬excellent heat preservation and can be cut discretionally 3.The processing work is much advanced, which totally avoid the long production cycle and the low production capacity. 4.YAOXING 1050/1260 Ceramic Fiber Board is divided in different series by the temperature,can be widely used as the back lining of industrial furnace and the hot surface of the low temperature furnace. It is one of the guarantees of reaching the energy conservation and the high quality. Characteristic: 1.Low Heat Storage 2.low thermal conductivity 3.Excellent compressive strength 4.Not fragile materials 5.Excellent flexibility 6.Exact measurement 7.Excellent flatness 8.Homogeneous structure 9.Excellent machine-processed capability 10.Easily fixing specialty 11.Processed continuously£¬the fibers interweave shapely 12.Excellent stability 13.Excellent chemical stability and thermal shock resistance. Plastic bags inside,Cartons outside.
Ceramic fiber board super manufacturer: vacuum molding ceramic fiber board, asbestos free, excellent pressure resistance with long service life. Model: spe-sf-cgb. Characteristics: Super ceramic fiber board are made from super ceramic blown fiber bulk with inorganic and suitable organic binders through vacuum molding and microwave furnace drying and formation. Our modern production technics works under the full automatic control and continuous production. The products are the perfect insulation materials for the lining of furnace. In the process of heating application, the organic binder will be volatilized at the temperature 250-350?, after volatilization, the board is pure white. The classification temperature(?): 1050, 1260, 1360, 1450 * smooth surface, accurate size, even density. * high resistance to press and wind corrosion. * excellent thermal and chemical stability. * excellent tenacity, easy to cut. * low heat storage, low thermal conductivity, low shrinkage, excellent insulation effect. * good erosion resistance. * easy application, can be used in direct contact with flame. Applications: * back-up lining material of high temperature industry furnace. * hot-face lining of ceramic kiln, heat treatment furnace and other industry kilns. * back-up insulation for castable, brick and monolithic refractory. * barrier again heat or flame.
100% asbestos-free. Tough and Flexible. Fire Resistant. Versatile in application. Rapid Installation Suitable for all types of Finishes. Resistant to rot and water damage. Not affected by termite or other insect/vermin attack. When installed and used correctly, it does not crack or warp. Virtualy maintenance-free cost effective. Size:1200*2400mm.
We supply high quality fiber cement board, which can be used wall panel, both interior and exterior wall, it is water-proof and fireproof. The standard size: 4'x 8' (1220x2440), thickness from 4mm to 16mm.
Mineral fiber board contains more than 92% of mineral fiber with no harmful substances. The board has an excellent fire resistant attribute which is tested and conform to BS standards. In carton.
Mineral wool board 1) Main Specification: 595í-595mm, 600x600mm, 603x603mm, 595x1195mm, 600x1200mm 2) Thickness: 6.8mm, 7mm, 7.5mm, 8mm, 9mm, 10mm, 12mm, 14mm etc. 3) It is a high-grade construction material with mineral wool as the main raw material 4) It has undergone the processes of burdening, forming, drying, cutting, tenon-making, surface finishing and spray coating 5) This product integrates such features as good fireproof property, sound absorption, decoration and heat insulation 6) Widely used in hotels, restaurants,shopping malls, ballroom,hall, theaters, cinemas, railway stations, auditorium, offices, living rooms, offices, electronic room, precise equipment room and the residential construction industry
Fiber cement board Sigma boards are autoclaved to become stable product. *properties: 100% non-asbestos Density: 1300 kg/m3 Coefficient of thermal expansion: 0.11 kcal/m.Hroc Bending strength: over 180 kgf/cm2 Linear expansion rate: 0.1% Water absorption rate: 35% Water penetration rate: 0% Water content: 8% Incombustibility according to cns 6532 and bs 476 Two hours of fire rating forfi6mm wall system with w-csp concretefj *advantages: Light weight, only 1/3 of total weight compared to rc brick wall The wall is solid and firm inside, and resistant to impact pressure. Painting, tiling and nailing is possible in the new system Noise reduction can be up to 46 db Good efficiency, workers can work three times faster compared to rc. Working environment can keep it dry and clean for better management. Cost of this system will be almost the same as the brick wall. Certificates with two hours of fire rating. We can produce according to client's requirements, below are the general size, for your reference. 1220 x 2440 x 6mm, 1220 x 2440 x 10mm, 1220 x 2440 x 12mm, 1220 x 2440 x 16mm
Details Our company has exported ceiling tiles for over 16 years. Till now we can produce more than 18 kinds pattern of mineral fiber ceiling tiles. Those products provide heat insulation and soundproof, which is a durable, versatile choice for many environments:Offices - Retail&Hospitality- Corridors- Auditorium,Cafeteria- Theaters- Libraries- Lounges- Shops- Canteens etc. Our mineral fiber ceiling tiles can be recycled and reused. They are marketable in many countries,such as Middle East, Africa, Europe, South America, Australia etc. FEATURES: Material: High Qualit y Mineral Wo ol Surface coating: Vinyl Emulsion Paint Thermal Conductivity:
Thickness 8 Composition Fiber Usage/Application Commercial Size 8*4 Color grey Fiber cement boards are composite materials made of sand, cement and cellulose fibers. More specifically, they are composed of Portland cement with glass-fiber mesh on the surface. These boards can be used independently or along with plywood. Additional Information: Delivery Time: 24 hour Packaging Details: loose
Fiber Cement Board Size:2440*1220mm Thickness:4,6,8,9,10,12,14,16,18,20,24mm Density:1.3g/cm2 Fireproof:A1 No asbestos Application: Backer Board,Interior Decorative,Exterior Cladding ect.
Used for wall decoration, renovation, etc., divided into several uses: ceiling, partition wall, interior and exterior wall decoration, floor partition, etc.
