Metal braided pump connector are normally are in BSPT (DIN 2999) and NPT treaded pipe ends which are designed to absorbed pump vibration, noise and reduce piping stresses due minor misalignment, these are available in carbon steel / Stainless steel pipes.
Supplier: Brass components ,brass precision part,brass cable glands, brass molding insert,brass stop plugs,brass ppr inserts,brass hardware, brass & metal nozzles,brass nipples, brass sanitary part,brass bush and brass products,brass anchors & fasteners, brass lock nut & check nuts & dome nuts, brass turned components,brass inserts, brass auto parts, brass threaded stud, brass forging components, brass forging metal turning parts, brass shower header wall bracket socket,brass electrical components,brass shower hinges pipe to glass connector,brass shower header clamp,brass knob,brass pipe bush,brass guide bush,brass parts,brass tuned components,brass and metal precision parts,brass,ms,ss elbow fitting,brass terminal box connector,brass tee,brass,ms,ss,aluminium stand off(spacers),brass&ms&aluminium &steel metal adapter,brass&ms & aluminium & steel precision turned components,brass & ms& aluminium & steel & metal nuts, bolts, washers, zinc (zamak,mazak) metal parts, brass & ms, ss, zinc, aluminium
Services: Manufacturer & exporter
FLANGED PUMP CONNECTOR MANUFACTURERS & SUPPLIERS Pump connectors are normally provided for vibration and noise isolation between the piping and the vibration equipment. A standard pump connector consists of a stainless steel braided hose with fitting. These fittings come with either a flange type or threaded type pipe end. Of the two, threaded connections cost less than flange connections, as flanges have multiple parts & configurations. Designed for mechanical equipment, pump connectors are manufactured from authentic stainless steel. Pump connectors of longer lengths can be made to accommodate additional lateral deflection and excessive vibration based on specific customer requirements. In most cases, stainless steel pump connectors are used to replace single arch rubber connectors.
The Hose Series A102 is an annular mechanically formed standard pitch hose with higher braiding coverage, providing optimum working pressure and maximum protection. These hoses have high physical strength, high temperature resistance and are highly corrosion resistant. These medium flexible hoses are also resistant to fire and moisture. These hoses are tested as per ISO10380 requirements and are available in 304, 304L, 321 & 316L stainless steel grades. Features of Stainless Steel Hose Series A102 Construction: Annular and Standard Pitch Hose Material: 304, 304L, 321 & 316L stainless steel Typical Length: 50 metres Braid Material: SS304/ SS304L High Braiding Coverage Characteristics: Light weight and Medium Flexibility Industries and Application Areas: High-pressure application, Steel Plant, Pharmaceutical Industries
The Hose Series A200 is an annular hydro-formed standard pitch hose with high physical strength, providing optimum working pressure and maximum protection. These hoses are high-temperature resistance and are highly corrosion resistant. These medium flexible hoses are also resistant to fire and moisture. The hydro-forming process produces a hose with minimal residual stress, uniform wall thickness throughout the corrugations and minimal work hardening. This process provides a very flexible, long-lasting corrugated metal hose. These hoses are tested as per ISO10380 requirements and are available in 304, 304L, 321 & 316L stainless steel grades. Features of Stainless Steel Hose Series A200 Construction: Annular and Standard Pitch Hose Material: 304, 304L, 321 & 316L stainless steel Typical Length: 25/50 metres Braid Material: SS304 /SS304L, Single Braid or Double Braid Characteristics: Medium Weight and Moderate Flexibility Industries and Application Areas: High-pressure application, Steel Plant, Pharmaceutical Industries
The Hose Series A300 is an annular mechanically formed wide pitch hose also called as a Solar hose. These hoses are installed in solar panels to transport the hot water from the solar panel to the hot water storage tank. These hoses have high physical strength and are resistant to fire and moisture. They have limited flexibility or flexibility with a little magnitude of amplitude. Features of Stainless Steel Hose Series A300 Construction: Annular and Wide Pitch Hose Material: 304, 304L, 321 & 316L stainless steel Typical Length: More than 50 metres (as per customer requirement) Braid Material: N/A (without Braiding) Characteristics: Static application Industries and Application Areas: Solar, Boiler, Sanitary, Water tank connection, Heat tracing application, and Radiator connection
The Hose Series A302 is an annular mechanically formed wide pitch, higher thickness Boiler hose. A Boiler hose is used as a device in solar-heated hot water systems to heat water. The heated water in solar collectors is then circulated through flexible metal hoses located in a tank and used as serpentine. These hoses are designed for more surface area convolution, transferring more heat into the storage tank. Hose convolutions are designed to keep moving as a result of constant thermal expansion and compression. This movement prevents the lime and residue formation in the hose surface and provides longer service life. Features of Stainless Steel Hose Series A302 Construction: Annular and Wide Pitch Hose Material: 321, 316 stainless steel Typical Length: More than 20 metres Braid Material: N/A (without Braiding) Characteristics: Static application Industries and Application Areas: Boiler application and Heat exchanger application
The Hose Series A400 is an annular hydro-formed close pitch hose with high physical strength, providing optimum working pressure and maximum protection. These hoses are high-temperature resistance and are highly corrosion resistant. These medium flexible hoses are also resistant to fire and moisture. The hydro-forming process produces a hose with minimal residual stress, uniform wall thickness throughout the corrugations and minimal work hardening. This process provides a very flexible, long-lasting corrugated metal hose. These hoses are available in 304, 304L, 321 & 316L stainless steel grades. Features of Stainless Steel Hose Series A400 Construction: Annular and Closed Pitch Hose Material: 304, 304L, 321 & 316L stainless steel Typical Length: 50 metres Braid Material: SS304/ SS304L Single Braid or Double Braid Characteristics: Medium Weight and High Flexibility Industries and Application Areas: Gas, Cryogenic and Vacuum application
The Hose Series A800 is an annular hydro-formed hose. These extra high-pressure annular corrugated metal hoses have all the advantages of a hydro-formed hose. They are manufactured with extra-heavy wall thickness. They have high physical strength and are resistant to fire and moisture. They are also flexible, suppresses rigid pipe noise transmission and are resistant to abrasion, penetration and damage. These hoses are available in 321 & 316L stainless steel grades. Features of Stainless Steel Hose Series A800 Construction: Annular and Standard Pitch Hose Material: SS304, 321 & 316L stainless steel Typical Length: 25 metres Braid Material: SS304 Single Braid or Double Braid Characteristics: Extra Heavy Duty and Less Flexibility Industries and Application Areas: Special high pressure applications
The Hose Series A1000 is an annular hydro-formed double-ply hose. These hoses are designed to withstand higher pressure resistance, high flexibility and higher vibration. These hoses are formed by hydro-forming process with minimal residual stress, uniform wall thickness throughout the corrugations and minimal work hardening. They have a higher lifetime compared to single wall hoses and have excellent damping effects that help isolate the vibration and noise. These hoses are available in SS304, SS316L and SS321. Features of Stainless Steel Hose Series A1000 Construction: Annular and Double-ply Hose Material: 304, 304L, 321 & 316L stainless steel Typical Length: 1.5 Meter Braid Material: Only hose (without braid) Characteristic: Light weight and Higher Flexibility Industries and Application Areas: Vibration Compensators, Automotive, Seismic connectors, External pressure bellows etc
