Aeroflex Seismic connectors are extremely critical component used for protecting vital installations such as sprinkler piping system from seismic motion like Earthquake. Seismic connector provide flexibility to piping system and use to absorb seismic movement in all three directions.
Aeroflex manufacture two types of seismic connectors,
60Vee Connectors
`U -Connectors
In both the Connectors flexible element move more easily, both toward and away from each other, up and down and transversely. All the movements are dependS upon the length of flexible element.
In addition to seismic protection, installation cost is lower comparing to conventional expansion joints considering lesser need for space and fixing points and ability for nested installations. Comparing to use expansion joints and conventional piping to absorb vibrations, imposing lesser load to main pipeline is one of their significant advantages
Supplier: A full range of metallic flexible hoses and hose assemblies are manufactured in authentic stainless steel with grades aisi 304, 321, 316 & 316l, conforming to the highest international quality standards. our stainless steel corrugated flexible hoses conform to bs 6501 part 1 and are manufactured as per type a, b, and c flexibility. composite hose, composite hoses for hydrocarbon application, gge (construction) composite hoses for chemical application ege (construction) sst (construction) sgt (construction) composite hoses for high temperature and cryogenic application lpg (construction) lng(construction) stainless steel hose assemblies industrial hose assemblies assemblies with standard end fitting assemblies with internal liner assemblies with external guard flanged pump connector pump connector threaded type seismic connectors vibration connectors vacuum flexible metal hose assemblies jacketed hose assemblies lancing hose solar hose
* The Hose Series A100 is an annular mechanically formed standard pitch hose. These hoses have high physical strength, high temperature resistance and are highly corrosion resistant. They are also resistant to fire and moisture. These have medium flexibility and helps dampen/reduce the amplitude of vibration at the outlet of the piping system. * These hoses are tested as per ISO10380 requirements and are available in 304, 304L, 321 & 316L stainless steel grades. Features of Stainless Steel Hose Series A100 Construction: Annular and Standard Pitch Hose Material: 304, 304L, 321 & 316L stainless steel Typical Length: 50 metres Braid Material: SS304/SS304L, Single Braid or Double Braid Characteristics: Light weight and Medium flexibility Industries and Application Areas: Steam, Water, Gas and General-purpose application
The Hose Series A101 is an annular mechanically formed close pitch hose. These hoses have high physical strength, high temperature resistance and are highly corrosion resistant. They are also resistant to fire and moisture. These are highly flexible hoses with long service life and are designed for limited connection areas. These hoses are tested as per ISO10380 requirements and are available in 304, 304L, 321 & 316L stainless steel grades. Features of Stainless Steel Hose Series A101 Construction: Annular and Closed Pitch Hose Material: 304, 304L, 321 & 316L stainless steel Typical Length: 50 metres Braid Material: Mostly without braid. But, SS304/SS304L is available in Single Braid Characteristics: Light weight and Higher Flexibility Industries and Application Areas: Gas and Water
The Hose Series A700 is an annular hydro-formed heavy-duty hose. These high-pressure annular corrugated metal hoses have all the advantages of a hydro-formed hose. They are manufactured with heavy wall thickness, which provides longer life. They have high physical strength and are resistant to fire and moisture. They suppress rigid pipe noise transmission and are resistant to abrasion, penetration and damage. These hoses are ISO10380 qualified and available in 321 & 316L stainless steel grades. Features of Stainless Steel Hose Series A700 Construction: Annular and Heavy Duty Hose Material: SS304, 321 & 316L stainless steel Typical Length: 25 metres Braid Material: SS304 Single Braid or Double Braid Characteristics: Heavy Duty and Medium Flexibility Industries and Application Areas: High-pressure application and Steel Plant
* This is high quality general purpose interlock hose constructed from a single strip of metal that is profiled and locked onto itself, the interlock, or overlapped sections of strip are able to slide back and forth result provide the flexibility. * Application: these hoses are used as liner in metal hose / exhaust flue gases / anti kink segment for metal hoses.
* Depending upon the design and profile, this is very flexible and used as conduit hoses, electrical cabling, Application: these hoses are used for armouring / protection
This is heavy duty hose SS321 Series A700 / 800 with stainless steel double wire braiding and inner double interlock liner for maintain the laminar flow of Oxygen/water which used for lancing oxygen and water in LD steel mills. Flange connection at both end with hinge bolts, sealing face with tongue and groove, support flange at both end as per customer requirement. All parts come in contact with Oxygen of stainless steel are remain oil and grease free, hence inner part of hose are remains ultrasonically clean. An additional mechanical protection can be achieved by use of an outer interlock profile hose. Inner liner (interlock hose) is predominantly used for the oxygen supply to improve the flow condition and reducer the pressure loss, The length of hose assemblies varies from 9 meter to 30 meters. Application: In steel production, the pig iron produced in a blast furnace, and oxygen is lance onto this molten iron at regular intervals. This encourage combustion of excess carbon and part of unwanted companion elements. The movements of lance hose over several meter in vertical as well as horizontal direction is made possible by flexible lance hose which are installed in 180 degree bend position. The fed of Oxygen and water shall be via separate hoses
GGE (Construction) Inner wire Spiral: Galvanise steel (G) Outer wire Spiral: Galvanise steel (G) Inner lining: Polypropylene (E) Cover: PVC Description: Aeroflex GGE is recommended foe use in delivery and / or suction of fuels, oils and lubricants in cistern trucks, railcars or fixed deposits. Features: Comply Standard EN 13765: 2010 Temperature range: -30C to +100 C Vacuum: 0.9 bar Maximum Length of coil: max 30 meter
VACUUM FLEXIBLE METAL HOSE ASSEMBLIES MANUFACTURERS & SUPPLIERS The vacuum hose consists of a dense, corrugated metal hose that is used in the vacuum range without braid. According to the cleanliness requirements, these flexible hoses are specially cleaned. Hydraulically formed, these flexible metal vacuum hoses are designed with safety in mind and made from longitudinal seam-welded and thin-walled stainless steel tubes. The vacuum hose assemblies are fitted with end connections, which ensures seamless connection with other pipes. Offering a complete surface finish, these stainless steel hose assemblies are custom-made as per material/vacuum specifications. Also, superior-quality cleanliness is maintained to ensure the highest-quality products are delivered based on the application needs. Description What Do We Offer? As a leading manufacturer of stainless steel flexible vacuum hose assemblies, Aeroflex offers a wide range of hose assemblies based on individual application needs. Premium grade raw materials are used to produce the finest hose assemblies that meet international standards. All products are manufactured under the strict supervision of skilled professionals and by using innovative technology that delivers optimum results. What more, all products are thoroughly tested by a QA specialist before there are delivered to the client. To ensure vacuum hose assemblies meet the required specifications, we offer customized options based on client needs. All flexible metal vacuum hoses offered by us are thoroughly cleaned after metal forming, during processing, and before dispatch. A leak-test is also conducted on the products through helium leak testing (up to 10E-8 mbar*l/s). Specifications for Vacuum Hose Assemblies Material hose: SS304L, SUS316L Material flange: SS304 Material bellows: SS316 Internal pressure: Max. 4 bar Working pressure vacuum atmospheric pressure: allowable leak rate 1.3310-10 Pa3/sec or less Features of Vacuum Hose Assemblies Hose Diameter: DN16 up to DN150 Hose Size: DN16 up to DN150 Length: Customized length as per client requirement Vacuum Hose Assemblies End Connection KF flange SUS304, SUS316L CF flange connection Flange connection Special connectors with custom specifications Advantages of Aeroflex Vacuum Hose Assemblies Highly durable, lightweight, and portable. Its rugged structure ensures excellent strength. They offer superior-quality finish and top-notch cleanliness. They are resistant to crushing, abrasion, UV, oil, and chemicals. They are anti-static, have an anti-shock helix, and smooth bore. These stainless steel flexible vacuum hose assemblies have high heat resistance. They can withstand harsh weather and are suitable for suction & transportation of air, liquids, fumes and small particle solids (powders).
