Three Four Ways Liuzi

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option

Three Way Plug Valve

Supplier: Sheet metal auto component for four wheeler & two wheeler ,taper retainer for taper roller bearing

Supplier: CNC machined components , Traub machined components,Two wheeler parts ,Four wheeler parts.
Services: Transportation and Shipping

Supplier: Automobile parts, automotive parts, car body parts, service parts, brake lining parts, motor pumps, water pumps, fasteners, OEM parts, two wheeler, three wheeler and four wheeler parts
Services: Clearing agent, transportation, freight forwarding, consol agent and chartering service.

The 3-way ball valve has particular structure and design of appropriative control system.It could be used widely in automatic controll systems and industrial sectors like metallurgy,mining, petroleum,chemical,electricity,light industy,watercraft and so on,matching with pneumatic control system.It is applicable to mixed or split stream project of different substance like fluid,gas or stive.We adopt dynamic balance four sides of seat sealed structure(Y type 3-way ball valve is three sides of seat sealed),this kind of structure make sure the good sealing:the slippery flow passage make the resistance of fluid to be weaker,and make the stream more smooth.The valve could be divided to L type and T type by the new open-back type of flow passage.The flange connection of valve could be designed accordding to the requirement of customer.

The three-position four-way valve, also known as the electromagnetic reversing valve, is specialized in the screw compressor unit. The three-position four-way solenoid valve belongs to the fluid working system category, and includes four cut-off portions controlled by electromagnets mounted on the valve body, which are installed on the valve body in two groups, and the electromagnets on the same side of the valve body. The power supply is connected in parallel and turned on and off at the same time; each cut-off part is composed of a compression spring, a tapered valve core, a sealing gasket, a guide sleeve, a sealing ring, a nut, and a combined sealing gasket. The valve core has a through hole, the electromagnet is opposite to the tapered valve core, and the through hole communicates with the front cavity and the rear cavity; the front cavity of the cut-off portion 15 and the front cavity of the cut-off portion 9 share the A port, and the cut-off portion 15 The middle cavity passes through the D port, the middle cavity of the cut-off portion 9 passes through the C port, the middle cavity of the cut-off portion 14 and the middle cavity of the cut-off portion 11 share the B port, and the middle cavity of the cut-off portion 15 communicates with the front cavity of the cut-off portion 11 The middle cavity of the cut-off portion 9 communicates with the front cavity of the cut-off portion 14. The utility model has the advantages that it has no internal leakage problem, prolongs the service life, and is not restricted by pressure, and is suitable for gas and liquid control.

Three way type ball valve Size: nps1/2"~12" Pressure: class150~300 Material: wcb, lcb, cf8m, cf3, cf3m Design & manufacture std.: api 608, aip 6d, bs 5351, asme b16.34 Face to face std.: as per manufacturer's standard End connection std.: asme b16.5, din 2543~2546 Test standard: iso5208, api 6d, bs 6755 Structure type: t-type, l-type Operated way: lever, gear, pneumatic, electric 1. We are a professional manufacture in hardware about 10 years. We also develop and produce butterfly valves, safety valves, ball valves, fittings, etc. 2. With high technical machinery equipment and experienced staff. We obtained the iso 9001 certificate. 3. Supplying hight quality with reasonable price is the goal for us to serve you better. We are confident of reaching the goal of customer's satisfaction. 4. We also devote to research and deveopment of valves and hardware products. 5. We are welcome for further enquiries and cooperation.