The service life of hydraulic flow control valve is more than twice that of the original manufacturer, Shirley has sent more and more inquiries to AAK
Shirley comes from a hydraulic equipment company in the United States, who is an old employee of the company. She rarely fails in purchasing, and her cooperation with AAK is tepid. It was not until the cartridge hydraulic flow control valves purchased last year failed that she learned that AAK Hydraulic Valve was different from other hydraulic cartridge valve manufacturers, and now she is sending us more and more inquiries.
At the beginning of the year before last, Shirleyâ??s company sold the hydraulic power unit for metal extrusion equipment. Less than half a year, customers complained that the pressure of the power unit was abnormal, and even went on strike. During after sales service, it was found that the leakage was caused by the serious wear of the hydraulic flow control valve sleeve, resulting in abnormal equipment pressure. The original hydraulic flow control valve manufacturer replied that under the high-pressure working condition of 450bar and high-frequency use, it is unavoidable for the hydraulic flow control valve sleeve to be worn and the only solution is to replace with new one for free, but 5 months later, the same problem occurred again. The customer was not satisfied and complained directly to the boss. The boss was surprised that an old hand like Shirley would stumble. After investigation, it was found that this hydraulic valve manufacturer who had cooperated for 5 years ignored the details of high pressure and high frequency.
The boss asked her to change the manufacturer and replace those severely worn hydraulic flow control valves as soon as possible. Shirley thought of AAK, because at the beginning of the inquiry, AAK mentioned that this hydraulic flow control valve had special working conditions, if the material selection was not proper, it would be impossible to use it for 1 year or more. After learning of Shirley's procurement dilemma, AAK urgently produced 50 hydraulic flow control valves within 1 month for them to replace the current ones. 6 months after the trial order was delivered, Shirley informed us by email that the equipment installed with AAK hydraulic flow control valve was working well without any abnormalities, and I said there would be no abnormalities even in 1 year. Shirley admired the confidence of AAK Hydraulic Valve in quality, and ordered another 300 hydraulic flow control valves.
Under the high-pressure condition of 450bar, to get the hydraulic flow control valve used in high frequency a service life of more than 1 year or 2million times, AAK Hydraulic Valve uses 3 advantages to exceed peers.
1. The valve sleeve of AAK hydraulic flow control valve adopts 18Cr2Ni4WA high-strength alloy carburized steel. During heat treatment, carburize at 900~920 , temper at 600~650
Daikin Hydraulic Pump PV22 Brand new Made in Japan Quantity 110pcs
Supplier: Steam coal, copper ore, iron ore, zinc ore, manganese ore in india, africa and morocco. we can supply copper ore 500mt to 3000 mt monthly basis, iron ore 25000mt to 50000mt, zinc ore 5000mt to 50000mt monthly basis. we are specialized in engineering valves, all types of metal pipes, fittings, fasteners, tubes, sheets, buttweld pipes and fittings and forge products. our mining of stone like indian limestone, manganese ore. we are associated with leading manufacturers of icumsa 45, 100, 160 etc. in brazil we supply in bulk vessel quantities moq is 12500 mt.
We are supplier and exporter of Hydraulic Oil. Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs. Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.
Hydraulic Bottle Jack
Focus-6500 butyl tapes has good performance in waterproofing and sealing, non-hardening, weather resistance, strong adhesion, adaptation and anti-aging . Technical Data Product Series FOCUS-6500 Series Application Home Decoration Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 22N/cm Tensile Strength 210KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet Advantages Smooth and Delicate. Excellent Adaptation. Greene nvironmental protection. Non-toxic tasteless. Good performance in waterproofing and sealing. Best quality with outstanding service life. Applications Focus-6500 butyl tapes are widely used in bathrooms, kitchen, home decorations, office areas and other home applications, for its good waterproof/mildew proof /airtight and environmental property.
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.) 6mm*8m 8mm*6m 10mm*4.57m Main Color - black Technical Data Product Series FOCUS-6300 Series Application Automotive Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 230KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet. Advantages Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to Excellent performance in non-corrosive, weather resistance and adaptation. Applications Provide waterproof protection to car doors waterproof membrane. Provide waterproof and sealing protection to the battery of new energy automobile. Other waterproof applications on cars and new energy cars
butyl tapes are waterproof and insulated tapes Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion and adaptation to irregular surfaces. It exhibits excellent performance in waterproof, sealing and anti-UV to antenna feeder and cable connection box. Main Specification (Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm Main Color - Black Technical Data Product Series FOCUS-6400 Series Application Communication Industry Elongation 400% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Tensile Strength 175KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. Applications Provide waterproof and sealing protection to communication base station and antenna feeder. Provide waterproof and sealing protection to cable connection box
Butyl Tapes Are Waterproof And Insulated Tapes Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion and adaptation to irregular surfaces. It exhibits excellent performance in waterproof, sealing and anti-UV to antenna feeder and cable connection box. Main Specification (Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm Main Color - Black Technical Data Product Series FOCUS-6400 Series Application Communication Industry Elongation - 400% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility Â40, no crack on surface within 24h Tensile Strength 175KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. pplications Provide waterproof and sealing protection to communication base station and antenna feeder. Provide waterproof and sealing protection to cable connection box
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing. Main Specification (Customized size is acceptable.) 3.0mm thickness * 12mm width *15m roll length 2.5mm thickness * 8mm width * 15m roll length 2 mm thickness * 15mm width * 20m roll length 2.5 mm thickness * 8mm width * 20m roll length Main Color black, grey, white Technical Data Product Series FOCUS-6100 Application Composite Materials Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 220KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion. Wide application temperature range. Excellent performance in waterproofing and sealing. Applications * During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent sealing property between vacuum bags and molds. * During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds. * As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht. * Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
