Oven Thermometer

Supplier: Discretes Semiconductors, Diodes, Transistors, Integrated Circuits Like Analog, Digital, Logic Devices And Pld, Passive Components Like Inductors, Resistors, Capacitors, Ic Memories Like Sram, Dram, Eeprom, Rf Microwave Like Filters, Mixers, Switches

Supplier: Best bluetooth digital thermometer with free app control forsmoker, oven,grill, cooking, candy, kitchen, bbq, kitchen support ios&android

Supplier: Digital Infrared Thermometers & Oximeter , Contact Less Temperature Measurement Equipment, Home Appliance Product .
Buyer: A) Plastic Raw Material : Pp / Hdpe / Abs b) Bop Item : 1) Dc Motor 3.6 Volt 15000 Rpm, 2) Lithium Battery 3.6 V 5.4 Wh . 3) Egg Cooker Hetter With Pleat 350 / 360 watts . 4) Thermostats Khd 301 , 5) Charger 220 Volt To 4 Amp Out Put With 2 Meter Cable

Glass Sealed Precision Diode DO-35 NTC Thermistors MF58 100K 3950 For Microwave Ovens I Overview Of The Glass Sealed Precision Diode DO-35 NTC Thermistors MF58 MF58 Glass sealed thermistor is designed for high temperature application and up to 250C , small size and can be formed or taped in ammo.The MF58 is a NTC thermistor which is manufactured using a combination of ceramic and semiconductor techniques. It is equipped with tinned axial leads and then wrapped with purified glass.MF58 glass encapsulated thermistor series offer customers excellent long-term stability and reliability but is smaller in size for applications where space is limited. The temperature sensors operate from -55 C to +300 C. Industries such as Building Automation, Industrial Controls, Appliances and Food Processing and Handling utilize this sensor for many temperature measurement and control applications. II Product Features Of The Glass Sealed Precision Diode DO-35 NTC Thermistors MF58 Glass encapsulated Heat-resistant Miniature designed High stability and reliability Reliable and economical MF58 series in the form of axial glass encapsulated form. Wide resistance range:0.1~5000K High precision resistance and B value. Glass encapsulated, can operate in high temperature and moisture environment. Small dimension, solid, convenient for automatic installation. Operating temperature range: -45 ~ +250C III Application Of The Glass Sealed Precision Diode DO-35 NTC Thermistors MF58 Electric rice cooker Bakemaker Electromagnetic Oven Disinfector Water fountain Dish washer Chemical industry equipments Food processor Thermometer and and thermoal controler Mobile battery and charger IV Main Technical Parameters Of The Glass Sealed Precision Diode DO-35 NTC Thermistors MF58 Parameters Parameter range Test conditions R25nominal resistance 500 1M Constant temperature 50± 0.05 Allowed R25 deviation(%) ± 1 ,± 2 ,± 3 ± 5 ,± 10 Constant temperature 50± 0.05 B25/50(material coefficient) (thermal sensitive index ) 2500 5000K Constant temperature 25 ± 0.05 Constant temperature 50± 0.05 Allowed B25/50deviation(%) ± 0.05 ,± 1 ,± 2 Constant temperature 25 ± 0.05 Constant temperature 50± 0.05 (dissipation factor) 1.5 mw/ In still air (thermal time constant) 17S In still air TA(working temperature) 55 250 PN(rated power) 50 mw In maximum working temperature

Product Applications: Temperature control and temperature detection induction cooker, electric pressure cookers, rice cookers, electric oven, disinfection cabinet, microwave ovens, electric heaters and other appliances: 1 2: Electronic thermometer 3: temperature control and detection of industrial, medical, environmental, weather, food processing equipment 4: hygrometer temperature control and detection The Product Sells Point: Key Specifications/Special Features: A: Size chart Single-ended glass encapsulated NTC thermistor II: Product Features: 1: MF5D radial lead products for single-ended glass encapsulated form 2: good stability, high reliability 3: Wide range of resistance: 1KO ~ 200KO 4 high precision resistance and B values 5: glass packaging, can be used in harsh environments such as high temperature and high humidity 6: Small, rugged, easy to automate installation 7: Operating temperature range -40 ? ~ + 300 ? 8: Rated power: =25mW 9: Heat induction fast, high sensitivity 3: Product Applications: Temperature control and temperature detection induction cooker, electric pressure cookers, rice cookers, electric oven, disinfection cabinet, microwave ovens, electric heaters and other appliances: 1 2: Electronic thermometer 3: temperature control and detection of industrial, medical, environmental, weather, food processing equipment 4: hygrometer temperature control and detection Four: Model Description MF 5D 103 F 3950 ? ? ? ? ? ?MF ¬-- negative temperature coefficient (NTC) thermistor Code. ?5D-- single-ended glass encapsulated NTC thermistors. ?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O). Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5% ?3950-- thermal resistance index (material factor) B is: 395 × 10 (K) Note: according to customer requirements, provide different resistance, B value precision, customization. NTC thermistor measurements must note the following: • can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation. • After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement. • Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC. • High temperature measurement, required temperature bath thermometer correction, check

Product Applications: 1: induction cooker, electric pressure cookers, rice cookers, electric oven, disinfection cabinet, water dispenser, microwave ovens, electric heaters and other appliances temperature control and temperature sensing. 2: Electronic thermometer 3: temperature control and detection of industrial, medical, environmental, weather, food processing equipment 4: hygrometer temperature control and detection 5. Air conditioning equipment, heating equipment, temperature control instrumentation, electronic gifts, electronic hygrometer, car thermometer, electronic calendar, a rechargeable battery pack and charger The Product Sells Point: Key Specifications/Special Features: 1: Appearance production requirements: 1: cylindrical shell size: 3 * 8,4 * 20,5 * 25,5 * 30,6 * 30,5 * 80,6 * 100, etc. (can be customized according to customer requirements), the unit: (MM) 2: File Dimensions: can be customized according to customer requirements 3: Cable length: according to customer requirements 4: Wire: PVC and Teflon wire and cable (customized) 5: Wire colors: black, white, red, yellow, green (can be customized according to customer requirements) 6: thermistor parameters: according to customer requirements 7: Housing Material: nickel-plated brass or stainless steel 2: Product Features: 1: MF53 series NTC thermistor for temperature sensor 2: Wide range of resistance: 1KO ~ 500KO 3: Resistance and B value of high accuracy, consistency, and interchangeable 4: good insulation, high reliability, reflecting the fast, 5: with double sealing process, with good sealing and insulation resistance to mechanical impact, anti-bending ability, high reliability 6: Can a long time stability (in the resistance drift rate =1 ‰) 7: The package can be used depending on the installation conditions, user-friendly installation 8: Operating temperature range: -40 ~ 200 ? 3: Model Description: MF 53 103 F 3950 ? ? ? ? ? ?MF ¬-- negative temperature coefficient (NTC) thermistor Code. ?53-- various band shell temperature sensor NTC thermistor. ?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O). Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5% ?3950-- thermal resistance index (material factor) B is: 395 × 10 (K) Note: according to customer requirements, provide different resistance, B value precision, customization. NTC thermistor measurements must note the following: • can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation. • After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement. • Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC. • High temperature measurement, required temperature bath thermometer correction, check