Portable Exchange Deionization (PEDI) provides flexible configurations and rapid deployment of ion exchange systems without the need to handle potentially dangerous chemicals or to deal with acidic and basic regeneration wastewaters. Portable exchange can be used for selective removal of targeted contaminants as well as for bulk deionization and polishing the effluent from other treatment processes. Suzhou X Chemical manufactures a wide variety of mixed bed and separate component resins specifically for the portable exchange industry. They are available regenerated (ready to use) and in exhausted forms (suitable for long term storage). Ion exchange resins for portable exchange use are available in high purity and low TOC versions suitable for pharmaceutical and semi-conductor applications
D G EXIM is well positioned in the water treatment business and technically geared to tailor-make solutions to any water treatment requirements. Every situation is analyzed based on the elements present and a unique solution is offered. We supply chemicals for Boiler Treatment, Cooling Tower and Portable Water Treatment as well AS Effluent Treatment. Below you will find some of the water treatment chemicals we supply Aluminum Sulphate Flocculant Ferric Chloride Ferric Sulphate Ion Exchange Resins Calcium Hypochlorite 65% Sodium Hypochlorite 15% Hydrogen Peroxide 50% Hydrochloric Acid Phosphoric Acid Sulphuric Acid Bac 50 / 80 Activated Carbon Poly Aluminium Chloride (P.A.C) Chlorine Gas Sodium Sulphite
Its typical use as a tank cleaner or for general decreasing, cleaning and gs freeing for double bottom tanks, wing tanks, pipe lines, fuel oil tanks This can be beneficial as part of the initial cleaning process after the carriage of Lube oils and Lube oil additives. As soon as the tank in question has been checked empty by the attending surveyor, RXSOL-20-2054-025 Plus should be sprayed over all surfaces which are safely reachable. irst of all drain off any remaining oil from Heat Exchanger. 2) Connect the discharge side of a portable pump to the lower heat exchanger connection & the suction Side of the pump to the bottom outlet of a 200 liter drum. 3) Complete the circuit by connecting the upper connection on the heat exchanger to the top of the drum. 4) Maintain the bath temperature between 60-80 0 C throughout the cleaning operation. If it is not possible to heat, the operation will need to be extended. It is cost effective, easy to apply and use. High emulsification on mineral oils and petroleum based chemicals. Safe to use on most metal surfaces
