Fluoropolymers

EverFlon fluorinated lubricant powder is a soft material of low molecular weight that is applied to form a dry lubricating film under light contact pressure. When this contact pressure continues between the two mating surfaces, either of which contains EverFlon powder, the transfer of the fluoropolymer lubricant to the opposite surface occurs. This results in the formation of a micro-thin lubricating film, which has excellent anti-friction properties. EverFlon MV1 is a fragile PTFE powder that can be broken down into submicron particles by high shear mixing in a liquid medium. The degree of particle size reduction depends largely on the degree of shear. For example, mixing MV1 with a medium viscosity lubricant and then passing the mixture twice through a three-roll grinder yields a sub-micron size range, with many particles measuring 0.3 microns in size. MV1 is particularly suitable for inks added to can coatings as well as oils, greases and elastomers Medium.

Everflon+ Fluoropolymers Color Masterbatch Reap the benefits of excellent pigment dispersion in your final polymer mix with Everflon+ masterbatch formulations for fluoropolymers. Pigment concentration and viscosity can be tailored to your specific application, and formulations are suitable for end-products with wall thicknesses that are as thin as one millimeter or 25 microns. Whether you are producing wire insulation or jacketing, film, tubing and profile shapes or injection molded parts, speak to our team of experts to find the right solution for your needs. Colorants are based on specific high-performance resins from Everflon FEP, PFA and ETFE. When manufacturing our color batches, the color pigments are placed at a high concentration within fluoropolymer. Our customers use this color concentrate in a ratio of 5 10% to the basis polymer. already colored according to customer specifications. We can customize our color masterbatches to make them work on the basis of the desired raw material type or according to the requirements of the final product. If, for technical reasons, a color masterbatch cannot be used, we offer a ready-to-run material that is

Everflon FEP Aqueous Dispersion Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant. It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive. The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at -240 °C (-400 °F). Everflon FEP D50 aqueous dispersion provides: Inertness to nearly all industrial chemicals and solvents Stability at high temperatures Excellent dielectric properties Excellent weatherability Application Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation Cast film for capacitor dielectrics or chemical barriers Hot melt adhesive for PTFE, PFA, and FEP parts Metal coatings

Everflon® PTFE Dispersion D60 is a milky white aqueous with non ionic surfactant. It provides inertness to nearly all industrial chemicals and solvents;stability at high temperatures;excellent dielectric properties;lowest coefficient of friction of any solid materials; excellent weatherability and no-stick characteristics, using temperature is between -240 °C (-400F) to 260 °C (500F).

Supplier: Fluorine chemical products including the refrigerant gas PTFE, PVDF, FEP, FKM, PFA and other series of fluoropolymers and fluorinated fine chemicals
Services: Producing & exporting

Supplier: Made up of borosilicate 3.3 glass, fluoropolymers (ptfe, fep, pfa, pp etc) and exotic metals (ta, ti, nb etc) meant for the chemical, pharmaceutical industry, glass pipeline & plants, pilot plants, miniplants, kilolabs, acid recovery plants, sulphuric acid recovery & concentration plant, nitric acid recovery & concentration plant, distillation units, evaporators, heat exchangers, bromine recovery plant, solvent recovery plant, extraction units
Services: Engineering design, detail engineering, project management, equipment & piping design, heat exchanger design
Buyer: Borosilicate 3.3 glass tubes, ss & tantalum pipes & tubes

Application: This PTFE material is for making PTFE thread seal tape. PTFE DF-201 suitable for low density tape PTFE DF-203 suitable for high density tape Material Properties: Excellent chemical resistance Greatest resistance to fatigue Flame resistant No stick &Low coefficient of friction Not hygroscopic (water absorption < 0,01%) Excellent dielectric insulation properties Storage&Package: 1.Stored in clean and dry places, and temperature range is 5~30 2.Net Weight 20kg/drum., 380 drums/20 GP 3.Should be Transported as non-dangerous product, avoiding heat, moisture &strong shock. Specification: Item PTFE Fine Powder DF-201/203 Excellent Grade Smoothness & Cleaness Clean & white surface Tensile Strength, (Mpa) DF-201 24.0 DF-203 28.0 Elongation at Rupture, (%) DF-201 350 DF-203 330 Volume Density, (g/L) 475±100 Extrude pressure, ( RR100) Mpa 9.7±4.2 Average Grain, ( m) 525±150 Moisture Content, (%) 0.04 Melting Point, () 327±5 Stand Relative Density 2.200 Thermal Inst, Index, 50/30 Electric Strength, (KV/MM 2.1 Dielectric Dissipation factor 3*104 For process Paste extrusion

Application: Fluorinated Ethylene Propylene resin DS610 is enabling extrusion processing methods, used for wire insulation layer , tubes, films and so on. Material Properties: Excellent thermal quality stability Outstanding chemical inertness Good electrical insulation Low coefficient of friction Storage and package: 1.Stored in clean and dry places,and temperature range is 5~30â??. 2.Net Weight 25kg/bag 3.Should be Transported as non-dangerous product, avoiding heat, moisture &strong shock. Attention: The processing temperature should not be exceed 420â??, to prevent toxic gas from releasing. Specification: Item FEP DS610 A B Appearance Translucent particle Melting Index, g/10min 5.1~8.0 8.1~12.0 Hardness 58 Tensile Strength, â?¥, Mpa 21 Elongation at break, â?¥, % 300 Relative Gravity 2.12~2.17 Melting Point, â?? 265±10 Dielectric Constant (106HZ),â?¦ 2.15 Dissipation Factor (106HZ),â?¦ 7.0*10-4 Heat Stress Cracking Resistance ----- Usage Extrusion processed for generic type resin: Wire insulation layer FEP tube FEP film

Application: This PTFE Aqueous Dispersion is used for PTFE Coating & impregnating such as asbestos, fiberglass, anti-corrosive, abrasion resistant, filature and lubricating materials. Material Properties: Typical outstanding characteristics of fluoride Resin Excellent thermal stability Corrosion resistance ,Excellent chemical inertness Good electrical insulation,Low coefficient of friction Storage&Package: 1.Stored in clean and dry places,and temperature range is 5~30â??. 2.Net Weight 25kg/drum, 432drums/20â??GP. Or 1.2Mt/Drum. 3.Should be Transported as non-dangerous products, avoiding heat, moisture &strong shock. Specification: Item PTFE Aqueous Dispersion DF-301 Excellent Grade Appearance Milky or yellow liquid PTFE Content, % 60±2 Particle Size(μm) DF-301 0.2 PH Value 8.5~10.5 Viscosity (25â??),(Pa.s) (15-30)x10-3 Content of case active agent 4~6 For process Coating and Impregnating