Aluminum Hydroxide Ath

1. Technical Index Brand Chemical composition (%) AL2O3 not less than Fire Loss not more than Impurity not more than SiO2 Fe2O3 NA2O AH-1 64.5 35 0.02 0.02 0.4 AH-2 64.0 35 0.04 0.03 0.5 AH-3 63.5 35 0.08 0.05 0.6 Physical feature: there are mainly 4 sizes of aluminum hydroxide, 325, 2000 and 3000 mesh. Note : (1) AL2O3 content is of the difference of 100% minus firing loss and impurity content. (2) The chemical composition is calculated of the baking at 110¡À5¡ãC for 2 hour. (3) The impurity content is treated in line with the number rule of GB8170. 2.Application: Aluminum hydroxide is the most consumable and applicable inorganic additive flame retardant that does not only resist firing, but also prevents from smoke, dropping or toxic gas. So, it is widely used with gradual increase of the usage, at the sectors of hot solidifying and moulding plastic, synthetic rubber, coating and construction materials. 25kg/plastic woven bag, 20 metric ton per 20'container.

Supplier: Aluminum sulfate, caustic soda flakes (sodium hydroxide), calcium hydroxide (hydrated lime), calcium carbonate and calcium hypochlorite

Aluminum Hydroxide

Supplier: Light paraffin oil n60 & n40, white spirit, pvc resin, high purity zircon sand, methanol, base oil, linear alkyl benzene, hdpe, vinyl acetate monome xylene, bitumen | asphalt | tar, ethanol, ammonium nitrate, crude iodine prills, mono propylene glycol, mono ethylene glycol, hexylene glycol, di ethylene glycol,di propylene glycol ,n butyl acetate, methylene chloride, dot 3 brake fluid variations, antifreeze c3053, n butanol, isobutanol, ethyl acrylate,ethyl acetate, caustic soda (sodium hydroxide), caustic potash (potassium hydroxide), butyl acrylate, aluminum sulfate, pure cow ghee, petroleum jelly, urea 46% granular & prilled fertilizer, anhydrous citric acid, boric acid, white spirit, xylene , soda ash dense , copper wire
Services: We export deals in export of paraffin wax, caustic soda, hdpe, ldpe, sunflower oil, copy papers, charcoal, corn, soybeans, beans, used oil, chemicals, fresh fruits, oranges, apples, grapes, pomegranates, chicken, frozen meat, lldpe, pet flakes,

SYNONYMS:Chromic oxide; Chrome oxide green; Chromium (III) oxide; Chromium Sesquioxide; Chrome Green; Chromium oxide green pigments; Dichromium Trioxide; chromia; Chromium (III) oxide; Anhydride Chromique (French); Casalis Green; Chrome Ochre; Chromia; Chromic Acid Green; Chromium Oxide; PHYSICAL STATE:Green crystal powder 1. Chrome oxide green ceramics grade 2. Chrome oxide green pigment grade 3. Chrome oxide green abrasive grade 4. Chrome oxide green low hexavanlent chrome grade 5. Chrome oxide green high purity grade 6. Chrome oxide green metallurgical grade 7. Chrome oxide green refractory grade Formula: Cr2o3. Chrome oxide green,spec Cr2O3 :99%min. Tinting strength:100+/-5% Oil absorption:15-25% Fineness(residue through 325mesh):0.3%max. Water soluble matter:0.3%max. Moisture:0.2%max. Packing: in 25/1000 kgs bags. HENAN KINGWAY CHEMICALS CO.,LTD. Tel:86-371-65336567, Fax:86-371-65336188, Web: http://www.hnkingway.com Email: kingway@hnkingway.com

CERIUM (III)CHLORIDE , Appearance: white powder MOL FORMULA: CeCl3. CAS Number: 7790-86-5 anhydrous EINECS No.: 232-227-8 MOL WT. 246.48 anhydrous density: 3.97 g/cm3 melt point: 848'C anhydrous bolt point: 1727'C other name: cerium chloride anhydrous,Cerium Chloride CeCl3,Cerium trichloride,Cerium(III) chloride,Cerium chloride,Cerous chloride,Cerium trichloride, CERIUM CHLORIDE ANHYDRATE SPEC: TREO(total rare earth oxides) 69% min. CeO2/TREO 99.99% min. Moisture: 1.0% max. Packing in 50 kgs drums. inner vacuum packing.

BARIUM TITANATE BaTiO3 CAS No.:12047-27-7 EINECS NO.:234-975-0 Molecular Formula:BaTiO3 Molecular weight: 233.19 Appearance:white crystals powder Odor:odorless Density:6.02 g/cm3, solid Melting point:1625 'C (2957 'F; 1898 K) Solubility in water:insoluble Solubility: slightly soluble in dilute mineral acids; dissolves in concentrated hydrofluoric acid High quality Barium titanate(IV) (BaTiO3) CAS 12047-27-7 Typical Analysis: BaO/TiO2 (Mol):1.000±0.010 BaTiO3%:99.0 min. SrO%: 0.40 max. Na2O%: 0.10 max. K2O%: 0.015 max. Al2O3%:0.10 max. SiO2%:0.10 max. Fe2O3%:0.015 max. MgO%:0.01 max. Average Particle Size: 1.5um around

Lanthanum Oxide La2O3, Properties Molecular formula La2O3 Molar mass 325.81 g/mol Appearance White powder, hygroscopic Density 6.51 g/cm3, solid Melting point 2315 'C (2588 K) Boiling point 4200 'C (4500 K) Solubility in water Insoluble CAS No.: 1312-81-8 EINECS No.:215-200-5 spec typical TREO: 97% min. 98.5% La2O3/TREO: 99.9% min. 99.95% CeO2/ TREO: 0.025% max. 0.01% Pr6O11/TREO: 0.025% max. 0.01% Nd2O3/TREO: 0.015% max. 0.01% Sm2O3/TREO: 0.02% max. 0.003% Y2O3/TREO: 0.01% max. 0.001% Fe2O3: 0.02% max. 0.008% CaO: 0.20% max. 0.07% Cl: 0.10% max. 0.06% SiO2: 0.03% max. 0.03% L.O.I.: 3% max. 1.2% Scandium(III) oxide Yttrium(III) oxide Actinium(III) oxide Related compounds Lanthanum aluminium oxide, LaSrCoO4

Regarding Aluminium Hydroxide for filler,spec as follow: Al(OH)3: 99.6% min. SiO2: 0.05% max. Fe2O3: 0.02% max. Na2O: 0.2% max. L.O.I.: 35% max. Moisture: 0.2% max. PH: 7.5~10 Whiteness:95% min. Particle Size:D50: 13~18um +325mesh: 35% max. + 60 mesh: 0% max. Packing: in 25 kgs bags.