High-Current Probe Pogo Pin P350(150) for Electronic Test
Cable harness test probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. Their standard and requirements are higher than other series of test probes. They can be divided into screw-thread harness test probes, cable harness switch probes, non-screw-thread harness test probes, position-limited harness test probes and cable harness high-current probes, etc.
High-current probes can withstand high current and high temperature in the tests. They are mainly applied to the in-circuit test field of high temperature and high current environments.
High-current probes manufactured by Centalic mainly include P203, P264, P265, P350 and P420, etc. There is a fixed schedule for mass production of P350(150)-H-14G(C) This probe can withstand the current up to 20 Amps. And its typical maximum contact resistance is 50 milliohms.
The materials used for the construction of this high-current test probe are different for each component:
The barrel is made of brass. Subsequently gold and nickel plated during the galvanic plating phase.
The spring is made of gold plated music wire.
The plunger is made of SK4, then gold and nickel plated.
The plunger tip is made of brass, then gold and nickel plated.
For details, please check parameters in below table.
Technical Specifications
Recommended
Current Rating: 20 amps, continuous
Contact Resistance: 50 millohms, max
Full Stroke: 7.5 mm
Rated Stroke: 5 mm
Spring Force: 397 gf at load 5 mm
Company Information:
in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Supplier: Soda ash light / dense 99.2%
sodium bicarbonate
caustic soda flakes 99%
sodium sulphate anhydrous (ssa) 99%
sodium sulphite flakes (ssf) 60%
sodium metabisulphate
hydrogen peroxide (h2o2) 50%
formic acid 85%
glacial acetic acid
paraffin wax
liquid paraffin (white oil) lp 100
menthol crystal
fumed silica
deg (di ethylene glycol)
mono ethylene glycol (meg)
poly ethylene glycol (peg),
base oil 150n, bs 150, 600n
bitumen 60/70
rpo (rubber process oil)
lioh (lithium hydroxide)
hco (hydrogenated castor oil)
12 hsa (hydroxy stearic acid)
ferrous sulphate heptahydrate
additive for lubricating oil
aromatic chemicals
Services: Exporting of chemicals & other products
Supplier: Micro silica (silica fume), silica, fly ash, pozzolano, ggbfs and white cement, other cementatious materials and factory/plants specialized spare parts & equipments, automation & switchgear, drives & transmission spares, instrumentation & pump, pneumatic & hydraulic spares, valves & actuators, mechanical parts, high carbon ferro chrome, foundry pig iron, iron ore concentrate, chromite ore, antimony ore, silicon metal 441 (powder), ferro silicon (fesi), iron ore pellet, copper concentrate
Liquid Cooled Charging Cables are electric vehicle charging cables that utilize liquid cooling to achieve high-speed charging. These cables feature a 500A current rating and a 1000V voltage rating for charging speeds up to 500KW.
Flat Cable M&P is able to support a full line of flat cable and flat ribbon cable for electronic applications. Providing both power and data transmissions, flat cables are mainly used for internal connections within the equipment. They are available in a wide range of configurations to accommodate different connection and data transmission requirements and the range of sizes of the equipment using the cables. Flat cables provide consistent performance due to their layout and the spacing between the cables and are lighter, thinner and more flexible than other cables. Features of Our Flat Cables & Wire * Flat, ribbon and twisted configurations, with different levels of flexibility. * Shielded or jacketed cable to reduce signal interference. * Range of pitches and pin configurations to accommodate the application requirements. * Easy to fasten with clamps, adhesive, and tape. We provide custom services, including marking, kitting and custom cable design to provide you with a custom solution for your cabling application. Contact us to find out more about Flat Cables and Wires.
CIRCULLATION FAN Air cooling fans are used for maintaining good air circulation and temperature in poultry farms. Our 36 air circulating fans can be used for various applications, like poultry farms, industrial buildings etc., and providing high efficiency. These fans are available in both single phase and three phase motor option. 1.Grills are plastic coated and thick diameter wire gauge (2.5mm) is used, and the gap is maintained 15mm as per international quality standards to avoid human accidents and rate entering into the fan. 2. The blades are made of compounded plastic so less chances of bending and hence less breaking chances. 3. Motor is efficient and complete thermal protection and moisture proof. 4. The CFM of fan 13000 and minimum airflow of 8.5 meters/sec. 5. Minimum positive air throws of 50ft. When we say 50 Length in practically. 6. Easy installation &Zero Maintenance
Mystical combination of terracotta clay modelling with new design concepts which caters to current trend. Table lamps are handmade based on terracotta vases. The lamp shades are coated with a hand painted cloth and the inner surfaces are made of PVC which traps the heat emitted by the bulb.
Mystical combination of terracotta clay modeling with new design concepts which caters to current trend. Table lamps are handmade based on terracotta vases. The lamp shades are coated with a hand painted cloth and the inner surfaces are made of PVC which traps the heat emitted by the bulb.
Mystical combination of terracotta clay modeling with new design concepts which caters to current trend. Table lamps are handmade based on terracotta vases. The lamp shades are coated with a hand painted cloth and the inner surfaces are made of PVC which traps the heat emitted by the bulb.
mystical combination of terracotta clay modeling with new design concepts which caters to current trend. Table lamps are handmade based on terracotta vases. The lamp shades are coated with a hand painted cloth and the inner surfaces are made of PVC which traps the heat emitted by the bulb.
