1. Traditional floor construction usually adopts manual formwork and vibrators vibrating for concrete leveling, manually operated floor often has defects of uneven compactness, poor flatness and low work efficiency and so on;
2. The laser control system can monitoring the height of floor by laser feedback adjusting. This ensures the level flatness,dense and homogeneous of the floor;
3. This product can pave the concrete base,trowel the concrete and vibrate it to smooth. The work efficiency will be improved because the machine can set the height of elevation automatically, and the operator can finish the working area fast and efficiency;
4. This product is small, light, easy to operate, with reasonable price, 6.6Kw of Honda petrol engine ,strong start capability, and run more smoothly;
5. Adopts hydraulic transmission technology. Compare with other transmission methods, the transmission power are same, but hydraulic transmission device has light weight, compact volume, realize infinitely variable speed, wide range of speed, able to revise frequently and quickly, working steady. Combined with electric control to make the action and operation of the whole machine to realize automation.
1.Used high accuracy laser device, close loop control technology and precision integrated hydraulic system, and microcomputer automatic control. 2.Screed assembly is hydraulic controlled. Integrated with laser system and computer control system, the machine will self-level and finish the screeding work with high efficiency. 3.The laser transmitter which measures the elevation is independent located, so there is no worry about the accumulative error. Compared with the traditional wy, the construction joints will be greatly reduced, so the maintenance cost and slab use will be down greatly. 4.The flat and dual slope can be fully automatic controlled by the transmitter. For the complex floor which has high requirement for drainage, the 3-D floor processing system can be used. 5.The forward-seated operation can widen operator vision, reduce the labor intensity and improve working efficiency. 6.Steering, forward and reverse of the machine are all controlled by the integrated handles. Operation buttons and controller which are located on the one side of th seat, is user-friendly.
Walk Behind Roller Description --------------- Value Working weight --------------- 180kg Working width --------------- 560 mm Actual load --------------- 2.9 kg/cm Walking speed --------------- 1.6 km/hr Frequency --------------- 4620/rpm Centrifugal Force --------------- 10 km Engine --------------- G X 160 5.5hp (Petrol)
Overview: Walk- Behind Roller is professional road equipment has been designed to suitable for a number of small-scale compaction jobs. Mainly used for compaction of the asphalt surface, compacting sandy soil, other engineering foundation, and rolling lawn. Equipment operating radius and size are small means it can work in narrow area. Compaction effect is perfect due to the big powerful compaction force, and the device is able to complete the compaction work with flexible and efficient. Application: Highway municipal maintenance for the construction of cement stabilization layer of compacting, the construction area is narrow and compaction equipment weight sensitive construction occasions of compacting. Road construction in the pipe culvert, channel, abutment and other structures back-fill compaction operations. Construction of municipal landscape, residential area landscape, golf course. Features: Big capacity of the water tank can reduce the trouble of back and forth to add water. There is an automatic cleaning scraper on the wheel to prevent the accumulation of dirt and asphalt on the wheel and make the compaction more smooth. The adjustable folding operation of the handle brings a comfortable operating environment to the operator, easy to transport after folding or collection. Taking use of high-quality rubber shock block, work performance more stable.
Main technical specification Operating mass 308 kg Staic linear load 40 n/cm Vibration amplitude 0.6 mm Vibration frequency 70 hz Centrifugal force 13.5 kn Running speed 1.5 km/h Climbing ability 20 % Overall dimension 960*700*1050 mm Vibration round width 560 mm Engine power model 5.5/honda gx160kw Road roller packed by wooden or as your needed, machne size:960*700*1050mm
Main technical specification Operating mass 500 kg Staic linear load 35/38 n/cm Vibration amplitude 0.6 mm Vibration frequency 70 hz Centrifugal force 13.5 kn Running speed 3.0 km/h Climbing ability 25 % Overall dimension 1960*595*1000 mm Vibration round width 560 mm onstruction, backfilling pipeline etc.. Road roller packed by wooden or as your needed, machne size:960*700*1050mm
Main technical specification: Operating mass 770 kg Vibration amplitude 0.25 mm Vibration frequency 48 hz Inspire force 12 kn Running speed 0~2.5 km/h Climbing ability >25 % Turning radius 2700 mm Wheelbase 470 mm Ground clearance 275 mm Length width height 2330*795*1050 mm Drum width 600 mm Drum diameter 405 mm Length width height 1800*950*1330 mm Gross weight 950 kg Engine model cf186f Engine power 5.68 kw Engine speed 2600 r/min Fuel tank capacity 5 l Sprinkler tank capacity 30 l Feature: Iron pallet + carton box or as you needed
This is EXP price. For more detailed information and exact CIF price. Welcome to contact us. Jining Storike Machinery Co., Ltd, has more than 14 years experiences. We are one professional manufacturer for Mini road roller, Plate compactor, Tamping rammer mobile lighting tower hydraulic power station, troweling machine and other road construction machinery. For more information or request, welcome to tell us. We could do ODM for you. We are manufacturer and mark your brand LOGO for your market.
China coal 0001 Application of sh-14 walk behind single drum road roller Sh-14 walk behind single drum road roller is mainly used in foundation ditch, road, sports venues built compaction, can also be used to compact asphalt surface Features of sh-14 walk behind single drum road roller 1. Sh-14 walk behind single drum road roller equipped with honda gasoline engine or famous water-cooled diesel engine 2. With international famous brand hydraulic drive unit, reversing conveniently, long lifetime; 3. Surface spray, beautiful appearance, rust resistant. Parameters of sh-14 walk behind single drum road roller Sh-14 Compactionengine Vibration frequency80hzmodelhonda gx160 Exciting force15kntypeair cooling 4 stroke ohv single cylinder Fuel consumption313g/kwhpower5.5hp /3600rpm Size specification450mm*350mmhydraulic oil tank3.6l Net weight125kglubricating oil quantity0.6l Comparison of walk behind vibratory road roller Modelsh-14sh-30/30csh-700/700csh-50/50c/50cs Weight (kg)140330550540/540/570 Packing size(mm)1100*550*8501050*850*12001200*920*19201600*850*1900 Power(kw)4.14.1/3.19.7/4.46.7/4.4/5.7 Fuel capacity(l)3.63.6/1.96.5/2.75.9/2.7/6.5 Fuel typegasolinegasoline/dieselgasoline/dieselgasoline/diesel/diesel The vibration frequency(hz)70707070 Climbing ability30%30%30%30% Speed(km/h)3.83.83.83.8 Linear static pressure(n/cm)30454545 Typewalking single Drum roller walking single drum roller walking single Drum roller walk behind Dual-drum roller Steel wheel size(mm)400x450426x600530x700426x600*2
We are one professional manufacturer for Mini road roller, Plate compactor, Tamping rammer mobile lighting tower hydraulic power station, troweling machine and other road construction machinery.
