1.Used high accuracy laser device, close loop control technology and precision integrated hydraulic system, and microcomputer automatic control.
2.Screed assembly is hydraulic controlled. Integrated with laser system and computer control system, the machine will self-level and finish the screeding work with high efficiency.
3.The laser transmitter which measures the elevation is independent located, so there is no worry about the accumulative error. Compared with the traditional wy, the construction joints will be greatly reduced, so the maintenance cost and slab use will be down greatly.
4.The flat and dual slope can be fully automatic controlled by the transmitter. For the complex floor which has high requirement for drainage, the 3-D floor processing system can be used.
5.The forward-seated operation can widen operator vision, reduce the labor intensity and improve working efficiency.
6.Steering, forward and reverse of the machine are all controlled by the integrated handles. Operation buttons and controller which are located on the one side of th seat, is user-friendly.
1. Traditional floor construction usually adopts manual formwork and vibrators vibrating for concrete leveling, manually operated floor often has defects of uneven compactness, poor flatness and low work efficiency and so on; 2. The laser control system can monitoring the height of floor by laser feedback adjusting. This ensures the level flatness,dense and homogeneous of the floor; 3. This product can pave the concrete base,trowel the concrete and vibrate it to smooth. The work efficiency will be improved because the machine can set the height of elevation automatically, and the operator can finish the working area fast and efficiency; 4. This product is small, light, easy to operate, with reasonable price, 6.6Kw of Honda petrol engine ,strong start capability, and run more smoothly; 5. Adopts hydraulic transmission technology. Compare with other transmission methods, the transmission power are same, but hydraulic transmission device has light weight, compact volume, realize infinitely variable speed, wide range of speed, able to revise frequently and quickly, working steady. Combined with electric control to make the action and operation of the whole machine to realize automation.
Concrete Mixers Drum: Constructed of rolled steel plateand steel end plateswelded together with machined roller path.A central cast iron gear ring is fitted in segments.Special abrasiveresisting blades are provided for perfect mix. Strip: The fully automatic loader is designed to give a steep angle of feed. A shakeris is fitted to assist the discharge. Watertank:Self measuring type is fitted on the frame of the mixer. Transmission:Suitably encased bushed roller chain with machine cutsprokets driving directly on the drive shaft. In the drum roller assembly each roler is mounted with renewable bearings. Chassis:Strong all steel welded constructions with swivelling front axle provided with four iron wheels. Luberication is by means of grease ripples. Note:All moving parts are enclosed affording complete protection to operator and immunity from weather.
Transit Mixer Description:- Nominal capacity - M3 6 Geometric volume - M3 10 Filling ratio - % 59 Drum speed - PM 0 - 14 Diameter - Mm 2200 Rollers - No 2 Water pump - L/min 375 Water pump pressure - Bar 3 Water meter scale - L 0 - 400 Water tank capacity - L 400 Total weight - Kg 3400
Reverse Drum Mixer Description:- Water tank capacity - Lighter 120 Skip loading capacity - Lighter 750 Output per hour - Cu. M. 10-20 Output per batch - Cu. M. 0.5(1/2) Hydraulic system working pressure - Bar 90 Test pressure - Bar 120 Crompton Greaves make electric motor three phase û 440V - H.P. 12.5 Over all dimension Length - mm 3470 Width - mm 2100 Height - mm 3350 Pneumatic wheels - 600 X 19 4 Nos. Hopper Drum etc. made from M.S. Sheets - 6 & 8 mm Weight - kg 2500
Concrete cutter Description:- Power Motor - 7.5 H.px2800rpmx3P.h Engine - 8 H.px3600rpm Cutting Speed - 15mtr./ltr. Cutting Depth* - 4in-6in Transpotation - olid rubber wheels with bass bearings Dimensions - L-1420xW-730xH-800 Weight - 130kg approx. Water Tank - 50ltrs
Concrete Pump This is multi purposes pump with number of advantages because of high pressure it can be used for plastering, shotcreting, grouting and pumping concrete @ 15m3 hr. it is most ideal pump for a standard builder of India. The equipment is mounted on a strong framed chassis with pneumatic tyres for mobility on site at 25 Km/hr. An additional feature of Jamshedji pump is that an additional tyre is givern for easy move ability manually by a couple of workers for a short distance on site. The pump has been commissioned at the site of Tala Hydro Electric project, Bhutan for shortcreting job of tunnels and mountains slope, and the performance was very successful up to satisfaction of our customer.
Full bag concrete mixer machine with hopper and without hopper available. Diesel engine or electric motor operated available. Half bag concrete mixer machine also available
Pan mixer machine with roller and scrapper type available Various size like 3ft diameter, 4ft diameter, 5ft diameter, 6ft diameter available
Supplier: Power trowel, concrete vibrators, earth rammer, screed vibrators, concrete cutting machines, vacuum dewatering pump, vertical type power floater
