APL 5L GR. PIPES (USED IN OIL AND GAS INDUSTRIES)
SV Trade supplying according to appropriate standards as well as customer specifications in a large variety of steel grade and dimensions. Specific requirements on execution, tolerances, lengths, mechanical and corrosion properties are offered on request.
Salient Features:
Heat Treatment facility upto 100 NB.
Capability to produce Pipe having very close Diameter Thickness ratio.
Capability to manufacture Pipes upto Grade API X-80 or Equivalent.
Application:
Oil & Gas / Refineries & Petrochemicals Sector
Oil and Gas Pipeline
Technical data Standard Out Diameter Tolerance of Pipe End Tolerance of Pipe Body API 5L 219.1 273.1 +1.6mm, -0.4mm ±0.75% 274.0 320 +2.4mm, -0.8mm ±0.75% 323.9 457 +2.4mm, -0.8mm ±0.75% 508 +2.4mm, -0.8mm ±0.75% 559 610 +2.4mm, -0.8mm ±0.75% Standard Grade Out Diameter Wall Thickness API 5L A 219.1 457 +15%, -12.5% B 508 610 +17.5%, -12.5% X42-X80 508 610 +19.5%, -8%
Product introduction API 5L X80 Pipe is a standardization for pipeline transportation systems within the rock oil, gas, water, and fossil fuel industries. API 5L-X80 steel is used in polar regions, wherever high toughness at low temperatures is needed. Specification: Api 5l X80 Psl2 Sizes Nominal Pipe Size 1/2" to 48 " O.D. Wall Thickness - Schedule 10 through 160, STD, XS, XXS. Api 5l X80 Erw Pipe Standard API 5L X80 (Specification for Line Pipe - ANSI/API specification 5L - 44th Edition, October 1, 2007) Product Specification Level (PSL) API 5L X80 PSL 2 API 5L X80 PSL 1 API 5L X80 Line Pipe Length Single Random, Double Random & Required Length, Custom Size - 12 Meter lengths Api Grade X80 Pipe End Plain, Bevel, Screwed, Threaded Testing and Inspection Reports EN 10204 3.1, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, Destructive Test Report, Non Destructive Test Reports, Mill TC EN 10204 3.1, NABL Approved Lab, Chemical and Mechanical Reports, India Boiler Regulations (IBR) Test Certificate API 5L X80 Pipes Type Seamless / ERW / Welded / Fabricated / CDW Technical data ASTM API 5L X80 Seamless and Welding Steel Tube Mechanical Properties: Grade Pipe body of seamless and welded pipes Weld seam of EW, LW, SAW and COW pipe Yield strength Tensile strength Tensile strength Minimun Maximum Minimun Maximum ASTM API 5L X80 555 (80 500) 705 (102 300) 625 (90 600) 825 (119 700) 625 (90 600) X80 Pipe yield strength: Grade Permissible yield point ratio Yield Strength MPa(min) Tensile Strength MPa Elongation % (min) X80 = 0.90 555 625 â?? 700 20 Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
We can also manufacture and supply Carbon Steel Pipes according to customers' requirements from home and abroad. We here sincerely welcome clients throughout the global to visit our products showroom and feel free to contact us at any time. Type: Carbon Steel Pipe. Size: 24 Inch (DN600). Standard: API 5L. Grade: Grade B. Material: ERW Pipes (Electric Resistance Welded). Schedules: 10, Standard (STD), Extra Heavy (XH). Packing: as per customers' special requirements. Supply Ability: 5000 Metric Ton/Metric Tons per Month. Payment Terms: T/T, L/C, D/A, D/P.
Standard: API 5L Gread:A B X42 X46 X52 X60 X65 X70 X80 . Lash or as your demand.
Seamless Steel Pipe Standard: ASTM, API 5L, DIN Steel Grade: API 5L Gr.B, ASTM A106/A53, St37, St52, P235GH, P235TR1, P235TR2, and so on. Thickness: 1.0 to 60mm SCH20-SCH120 Length range: 2 to 13m Diameter: 10 to 762(2/5 to 30-inch).
Br.B .X42m x46m x56, x60, x70
Br.B .X42m x46m x56, x60, x70
Product introduction ERW Steel Pipe: Pipe Type: ERW Pipe, ERW Steel Pipe, Electric Resistance Welded Pipe Application: For Low Pressure Fluid Transmission, Machinery Manufacturing Specification: OD: 21.3mm ~ 660mm WT: 1mm ~ 17.5mm LENGTH: 0.5mtr ~ 22mtr (5.8/6/11.8/12 meters, SRL, DRL) Standard & Grade: API 5L PSL1/PSL2 Gr.A,Gr.B,X42,X46,X52,X56,X60,X65,X70 ASTM A53, ASTM A500, JIS G3466, ASTM A252, ASTM A178, AN/NZS 1163, AN/NZS 1074, EN10219-1, EN10217-1 End: Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends Surface: Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive Coating Packing: Bundled/In Bulk, Plastic Caps Plugged, Waterproof Paper Wrapped Production Process for ERW steel pipe: 1.Uncoiling 2. Leveling --- 3. End cutting --- 4. End shearing welding --- 5. Supercoil accumulator --- 6. Edge cutting --- 7. Ultrasonic detection --- 8. Forming --- 9. Electric induction welding --- 10. Ultrasonic detection for weld seam --- 11. Medium frequency heat treatment --- 12. Air cooling --- 13. Water cooling --- 14. Sizing --- 15. Flying cutting --- 16. Flush-out --- 17. Cropping --- 18. Flattening testing --- 19. Straightening --- 20. End facing and bevelling --- 21. Hydrodynamic testing --- 22. Ultrasonic detection for weld seam --- 23. Ultrasonic detection for pipe end --- 24. Visual and dimensions inspection --- 25.Weighting and measuring --- 26. Marking --- 27. Coating --- 28. Pipe-end protection --- 29. Bending --- 30. Shipping Specification of ERW steel pipe: API 5L/ASTM A53 GR.B (Small Diameter ERW Steel Pipe) Outside Diameter Wall Thickness Outside Diameter Wall Thickness (mm) (mm) (mm) (mm) 33.4 (1") 2.1-2.4 133 3.0-5.75 2.5-3.25 6.0-7.75 3.5-4.0 8.0-10 42.3 (1.2") 2.1-2.4 139.7 (5) 3.0-4.5 2.5-3.5 4.75-5.75 3.75 6.0-7.75 4.0-5.0 8.0-10 48.3 (1.5") 2.1-2.4 152 3.0-4.5 2.5-3.25 4.75-5.75 3.5-3.75 6.0-7.75 4.0-4.25 8.0-10.0 4.5-6.0 159 3.25-6.75 60.3 (2) 3.0-4.0 6.8-7.75 4.25-4.75 8.0-10.0 5.0-5.75 10.0-11.75 73 3.0-4.75 165 3.0-6.0 4.8-5.25 6.25-7.0 5.5-7.0 76.1 Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Line pipe is a kind of pipe that is made of high strength carbon steel. It is usually manufactured according to metallurgical specifications set by the American Petroleum Institute (API). There are two grade API 5L PSL1 and PSL2. The technical requests of PSL2 are higher than PSL1, some pipelines used for special conditions need to adopt PSL2. Line pipes are mainly used for the transportation of oil, natural gas and other fuels. Common line pipes are seamless pipe and welded pipe, and their pipe ends have flat ends, threaded ends and socket ends. The line pipes have different of diameters, ranging from 2 inches to 48 inches. For example, in most cases, the main pipeline carrying natural gas will require lines about 16 to 48 inches in diameter. Smaller lines that carry gas to and from main lines can be made up of pipes 6 to 16 inches in diameter. Product name: Line line, Seamless steel pipe API 5L; Standard: API 5L PSL2; Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS or NS); Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
