Downhole Motor with high performance and high deviation for horizontal section.
Through the advanced high-performance rubber technology, the output power of the motor is greatly improved, and the overall power of the drilling tools is guaranteed under the condition of reducing the number of stages.
Through the advanced series bearing technology.
The bending point distance is reduced to the maximum extent,and the tool slope is improved.
High wear resistant TC bearing technology with patent technology.
The whole Downhole Motor is shortened by nearly 3000mm, the drilling trajectory is smoother, and the quality of horizontal section is better.
Down-hole motor/mud motor is a positive-displacement motor(pdm), the high drilling fluid enters into the high fluid power converted into mechanical energy, and the rotor drives the principal shaft and bit rotating.
1. About the Manual The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over). 2.Description of downhole motor 1.The down-hole drill motor is a kind of downhole drill tool driven by mud. 2.As mud fluid from the mud pump enters the motor via the bypass valve, a certain pressure difference is formed at the inlet and outlet of the motor, pushing the rotor to rotate. Torque and rotate speed are transferred via the cardan shaft and the driving shaft to the bit. 3. Performance of the down-hole drill motor depends mainly on performance parameters of the screw motor. 4.This product uses the high and new technology of coating to avoid coating off of rotors resulted from the traditional technology. Its strength and life are greatly improved. 5.It is applicable to directional drilling,horizontal drilling, composite drilling, cluster wells, sidetrack wells and well workover etc. 3. Advantage of downhole motor Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
Supplier: Product scope : miniature electric motor, micro dc/ac motors: permanent magnet dc motor; geared-down motor; synchronous motor; brushless motor and servo motor, coreless motors, shaded hole motors
1. About the Manual The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over). 2. ADVANTAGES OF DOWNHOLE MOTOR Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 3. CONSTITUTION Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) : Crossover Sub Safety Catch Sub Power Section Coupling Assembly Bearing Assembly
Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-pass valve into the motor. This stream produces pressure loss at both inlet and outlet of the pump, to push the rotor into rotating, and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters. ADVANTAGES OF DOWNHOLE MOTOR Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 1. Material: High manganese steel 2. Standard: API 3. Features: Big torque, high effective, wide flow rate range, running stable and long using time. 4. Specifications: Fit for 3 1/2"--17 1/2" well hole, including straight body, single- bent and
Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-pass valve into the motor. This stream produces pressure loss at both inlet and outlet of the pump, to push the rotor into rotating, and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters. ADVANTAGES OF DOWNHOLE MOTOR Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 1. Material: High manganese steel 2. Standard: API 3. Features: Big torque, high effective, wide flow rate range, running stable and long using time. 4. Specifications: Fit for 3 1/2"--17 1/2" well hole, including straight body, single- bent and double-bent construction.
Since 2018, export of black motors is continuously decreasing due to the new and stricter black motor export regulation. Most companies were not able to continue the export of this motor. However, DM Trading, with the help of its partner companies in Japan, is able to continue exporting black motors ensuring that all the requirements of the law are met. Detailed description: A. Refrigerator / Air condition compressor motor scrap. B. Oil is taken out by making a hole on the motor. C. 20MT - 23MT per 20 FT container. D. Motors are packed in flexible bags. E. Sheet covering the floor and sides of the container to prevent oil residue from leaking, thus, preventing container cleaning and other unnecessary charges. F. Radiation test certificate from our company and a government accredited testing center. G. Minimum order: 1 container H. Supply capacity: 300MT - 500MT per month. I. Payment terms: T/T or L/C
Detailed Product Description Rolling door motor 750kg Input/output Voltage: 220V/24V Rated Power: 240W Advancing Force: 750KG Maximum raising height: 9m Output Torque: 606N.m Output speed: 5.2r/min Chain No.:10A Diameter of roller:129mm Rolling door motor 750kg HL-DC24V Direct Current Rolling Door Motor is the new latest model developed by our company. This product is adapted many patents and techniques, easy installation, reliable operation. This product is suitable for the automatic rolling door, office, shops and hospitals. Functions: 1) Remote control function: up/stop, down/stop, stop/lock, unlock. 2) Manual control function: up/stop, down/stop. 3) Storage power: If the power supply is steady, the motor is driven by AC220V and transferred into DC24V, In the absence of power supply, the storage power can supply power and DC24V rolling door motor can be operated about 20 times. Features: 1) Good design, advanced structure, strong power. 2) Easy installation, Long service life. 3) Low noise, Small power wastage, little vibration. 4) Remote control. 5) Supply reserved power equipment, In the absence of power, the users can also operate the motors. 6) The battery is 4Ah/12. One set packaged in two cartons(mainframe and accessories cartons). About 450 sets for one container.
Z4 Series DC motor is our latest products, widely used as a source of transmission of various types of machinery, metallurgical industry, such as mill drive, metal-cutting machine tools, paper, printing, textile, printing and dyeing, cement, plastics extrusion machinery and so on. The appearance of this series of electrical installation in addition to the size of the two-hole lead at the end of inter-axial size "B", in line with international standards IEC72. This series of motor performance and technical requirements in accordance with International Electrotechnical Commission standard, IEC34-1 West Germany or the requirements of national standards DIN57530 examination. This series of motors used polygonal structure, high utilization of space. To conjugate Stator MAGNETIC-laminated, the application of power rectifiers, can withstand the current pulse with the dramatic changes in the current (changes in the load) of the condition. Equipped with precision magnetic pole position for a result to the good. Electrical insulation level for the F-class, reliable insulation structure and impregnation process, to ensure stability and good insulating properties of heat. This series has a small motor, a good performance, light weight, output power, high efficiency and high reliability, with the current international advanced level of motor strength. Three-phase motors can be used full-bridge rectifier power control, as well as external-wave reactor and the long-term work. Rated voltage of 160V single-phase motors by the bridge power supply, now have to access armature circuit reactor to contain the pulse of current.
