Gerrard, a Spanish hydraulic customer who just repeated the order at the end of May, repeated another order for hydraulic pressure valve again today, with total 3 orders for a hydraulic pressure valve a year. Since Gerrard chose AAK hydraulic valve, his customers are very satisfied with the accuracy and stability of AAK hydraulic valve. The market sales volume has increased by nearly 30% year-on-year. Now he has a higher and higher position in the company.
I still remember that Gerrard urgently needed to purchase a batch of hydraulic pressure valves for cranes. However, due to the high requirements for inner hole accuracy, he visited more than 10 hydraulic valve manufacturers, and none of them could reach around 1�¼m error requirement. Gerrard was very anxious. Fortunately, some peers brought Gerrard into contact with AAK. Finally, AAK helped to solve the problem of inner hole accuracy of hydraulic pressure valve smoothly.
3 months before Gerrard got into touch us, AAK HYDRAULIC VALVE purchased a honing machine imported from the United States to deal with the production of special orders. After repeated exploration for more than a month, modified the fixture of the equipment ourselves, we created the most consistent SOP to ensure the 1 �¼M accuracy error of the inner hole for the hydraulic pressure valve. At present, less than 5% of the domestic hydraulic valve manufacturers are equipped with this equipment. Among these 5% of hydraulic valve manufacturers, maybe only one manufacturer, we AAK HYDRAULIC VALVE, can modify the equipment on our own.
When AAK HYDRAULIC VALVE promised Gerrard that we have 90% of confidence to ensure that the inner hole accuracy of the hydraulic pressure valve can be controlled at 1 �¼ M, he was uneasy. After all, he visited more than 10 hydraulic valve manufacturers, and none of them successfully controlled the inner hole accuracy of the hydraulic pressure valve to 1 �¼mã??Gerrard also was in doubt. We can understand him, because we haven't done the hydraulic pressure valve with inner hole accuracy error controlled at 1 �¼ M before.
After 15 days of sending the sample, Gerrard emailed us that the sample of AAK hydraulic pressure valve was approved at one time, and the surface finish of the hydraulic pressure valve was also praised by his clients. Subsequently, the first hydraulic pressure valve order from him was successfully completed.
AAK hydraulic pressure valve has two absolute advantages in controlling inner hole accuracy:
1. AAK HYDRAULIC VALVE has advanced equipment - honing machine, which is refitted by ourselves to ensure that the inner hole accuracy of the hydraulic pressure valve can be controlled at 1�¼m.
2. AAK HYDRAULIC VALVE has targeted operation process, can realize the personalized customization demand for the inner hole accuracy of hydraulic pressure valve, which can not be achieved by 95% of domestic hydraulic valve manufacturers.
We select all types of control valves from MNCs for steam , Water, Air, Thermic Fluid, Lube Oil application. We also provide technical support in selecting right product at best price. We are sourcing these materials from India itself.
MATIREAL - CAST IRON / CAST STEEL / STAINLESS STEEL 304/316/316L / WCB BALL - STAINLESS STEEL 304 / 316//316L STEAM - STAINLESS STEEL 304/316 GLAND NUT - 304 / 316 STAINLESS STEEL SEAT - PTFE/CTFE/GTFE SIZE - 1/4 INCH TO 4 INCH
MATIREAL - CAST IRON / CAST STEEL / STAINLESS STEEL 304/316/316L / WCB BALL - STAINLESS STEEL 304 / 316//316L STEAM - STAINLESS STEEL 304/316 GLAND NUT - 304 / 316 STAINLESS STEEL STUD NUT - STAINLESS STEEL 304 SEAT - PTFE/CTFE/GTFE
MATERIAL - CAST IRON / CAST STEEL / WCB / STAINLESS STEEL 3O4/316/316L BALL - STAINLESS STEEL 304 / 316 STEAM - STAINLESS STEEL 304/316/ GLAND NUT - STAINLESS STEEL 304/316 LEVER - STAINLESS STEEL 304 SEAT - PTFE / CTFE / GTFE STUD NUT - STAINLEES STEEL 304
Supplier: En590, jet fuel a1, pet coke, pump, valve, cosmetic, mechanical seal, cotton bag, glass bottle, hand sanitizer, hydraulics, cosmetic bottles,socks, paper drink straw, alcohol wipe, other korean products, mask, or nitrile gloves and hand sanitizer and korean cosmetics
The Mexican manufacturer can't get the hydraulic pressure control valve done, and AAK succeeded in the first sample Bahamonde is from Mexico and has cooperated with AAK on several non-standard hydraulic valves. At the beginning of this year, he was stuck by a hydraulic pressure control valve. A hydraulic crank-type lift developed by their company will appear at the exhibition in July. In order to get the test run successful as early as possible, Bahamonde found a local hydraulic pressure control valve manufacturer to make samples. The equipment commissioning was not smooth, and the fluid flow and pressure at the oil outlet of the hydraulic pressure control valve are unstable, resulting in inaccurate positioning of the hydraulic crank-type lift and unstable operation control. The original manufacturer said that the sample was based on the original design. Maybe there are defects in the original design. Bahamonde had contacted several local hydraulic valve manufacturers one after another, but none of them were willing to cooperate in redesigning the hydraulic pressure control valve and making samples. As the exhibition period was about to arrive, Bahamonde was very worried. Bahamonde thought of AAK because we had the experience of modifying their original design before. According to his hydraulic schematic diagram and the design of the original hydraulic pressure control valve, our engineers have a basic idea after discussing, but it takes time. Bahamonde told me that he could give me 50 days at most. After 3 times of design adjustment and 6 times of simulation, a new design scheme was determined. After 45 days, 30 samples of hydraulic pressure control valves were sent out. 2 weeks later, Bahamonde told me that the test was successful, and asked me to wait for the good news of their exhibition. Last week, Bahamonde placed an annual order of 1,200 hydraulic pressure control valves, and also mentioned that their hydraulic crank-type lift was very popular during the exhibition. Their engineers admire our technical team's brainy thinking. AAK made it successful this way: For this hydraulic pressure control valve, we changed the structure of the balance cone valve to the balance plunger type, which can let the pressure, connect the control working port and the pilot control port, control the fluid flow and pressure at the oil inlet, and conduct pilot control at the pilot port. At the same time, the hydraulic pressure control valve acts as the main stage of pressure control. The pilot flow of the valve is very small but the flow capacity is very strong, so the circuit design is flexible. And the newly designed hydraulic pressure control valve can integrate all pressure control circuits with external control functions, such as external control opening, external control closing, multi-stage pressure setting, etc., into the circuit, improving the stability of operation control.
Valves, Gate valve
1. Inner check valve: the check valve inside the valve body is to insure the hydraulic oil will not be returned. 2. Inner relief valve: the relief valve inside the valve body is able to adjust the hydraulic system working pressure. 3. Oil way: parallel circuit, with power beyond. 4. Control way: manual, air, air&electric, micro-switch, electric&hydraulic control. 5.Valve construction: monoblock construction, 1-8 levers are available to assembled as you requests. 6.Spool function: o, a, y , p etc. 7. Flow 40 l/min with pressure 160bar, 200bar, 315bar 8.Spool returning type with t (spring return) and w (ball locking) 9. Joining port: l (screw connection) 10 .Nominal diameter: g1/2; g3/8; m18*1.5
Year 2020 Other attributes Showroom Location United Kingdom, Nigeria, Peru, Spain, Canada, Chile, South Africa, USA, Turkey, United States, Japan Specifications: Operating Weight: 8 tons Bucket Capacity: 0.31 cubic meters Machine Weight: 7760 kilograms Hydraulic Cylinder Brand: Original Hydraulic Pump Brand: Original Hydraulic Valve Brand: Original Engine Brand: CAT (Caterpillar) Power: 49.7 kW Machinery Test Report: Available Outgoing-Inspection Video: Available Product Information: ADDITIONAL SPECIFICATIONS Product: Cat 308 Excavator (Used) Working Hours: 2200-2800 Origin: Japan Engine: Original Japanese Application: Building, Agriculture, Construction Features: Well-maintained Performance: Superior Engine Type: CAT Product for Sale: Cat 308 Excavator (Used) Are you in the market for a reliable excavator to boost your construction projects? Look no further than the Cat 308 Excavator. This powerful machine is known for its efficiency, durability, and performance in various job sites. Key Features: Operating Weight: 8,050 kg Engine Power: 68.4 kW Bucket Capacity: 0.24 - 0.52 m Maximum Digging Depth: 4,005 mm Reach at Ground Level: 6,340 mm
