Wc Connection Gasket

Wealson graphite composite gasket is also called reinforced graphite gasket or high-tensile graphite gasket. Graphite gasket is cut from pure graphite sheet with features excellent corrossion-sesistance, metal reinforcement, high and low temperature resistance, high internsity. It can be bear high temperature and high pressure. Graphite gasket is ideal gasket for valves and static seal in almost all applications. Graphite gasket can be used as sealing parts of connection point of all kinds of pumps, pipes, valves, pressure containers, heat exchangers, tower manhole, hand-hole and flange, as well as the sealing points of nilometer crystallizer and liquidometer.

Spiral Wound Gasket is formed of V-shaped metallic stripe and soft non-metallic filler by means of piled, spiral wound and connected its end and beginning by dot welded. Depend on its excellent compression resilience it is suitable for sealing spots where the alteration of temperature and pressure are frequent. It can be used as the static sealing element of pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. It has been widely applied in the fields of petrochemical, mechanical manufactory, power station, metallurgy, shipbuilding, medical and pharmaceutical nuclear power station and navigation, etc. We can produce according to ASME, BS, JIS and EN(DIN) standards or client request. CiXi Feite Sealing Material Co.,Ltd. , it is one of the sealing and gasket munufacturer in China, the company is located in CiXi which is the chinese sealing industrial country. It's specialized in designing, manufacturing and exporting a variety of gaskets and seals products. Gaskets: Spiral Wound Gaskets, Ring Joint Gaskets, Double Jacketed Gaskets, Kammprofile Gaskets, Corrugated Metal Gaskets, Metal Solid Gaskets (Copper,Iron,Aluminum), Non-metal Flat Gaskets,(PTFE,rubber,Non-asbestos,Mica,Cork), Automobile Gaskets, Exhaust Muffler Gaskets, Cylinder Gaskets etc.

Kammprofiletm gasket is the preferred gasket when improved performance at low seating stresses is required. It features excellent anti-blow-out properties linked with the reliably of a solid metal-to-metal seal combined with a soft sealing face to provide a tighter joint. It is particularly suitable for applications where high temperature, pressures and fluctuating conditions are encountered. Non-metal cover layers ensure that flanges are not damaged, even at extreme loads. This gasket is an ideal replacement for problem applications associated with jacketed gaskets, for heat exchangers, vessels and reactors and various flange connections. Pressure: (6.4~25mpa) Other items in : gasket kammprofile gasket corrugated metal gasket Materials for the faces: Flexible graphite, ptfe, non-asb, etc. Normal with thickness 0.5 mm

Kammprofile gasket Got kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, ptfe, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type kammprofile gasket 410l kammprofile gasket with outer ring (integral type) 410lm kammprofile gasket with outer ring (split type) Model 410lm split type metal toothed gasket with outer ring, can choose richer metal, e.G. Carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410l, and the lining metal can be repeatedly used. Product application: Got toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25mpa Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; Ptfe, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm

Kammprofile gasket Got kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, ptfe, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type kammprofile gasket 410l kammprofile gasket with outer ring (integral type) 410lm kammprofile gasket with outer ring (split type) Model 410lm split type metal toothed gasket with outer ring, can choose richer metal, e.G. Carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410l, and the lining metal can be repeatedly used. Product application: Got toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25mpa

Product Information: Description: GOT Kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, PTFE, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type Kammprofile gasket 410L Kammprofile gasket with outer ring (integral type) 410LM Kammprofile gasket with outer ring (split type) Model 410LM split type Metal toothed gasket with outer ring, can choose richer metal, e.g. carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410L, and the lining metal can be repeatedly used. Product application: GOT toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25Mpa Selectable material: Metal material German trademark Hardness Temperature íµ Density g/cm3 Thichness mm Carbon Steel 1.1003/1.0038 90~120 -60~500 7.85 2 3 4 SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other metal on require Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; PTFE, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm

Product Information: Description: GOT Kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, PTFE, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type Kammprofile gasket 410L Kammprofile gasket with outer ring (integral type) 410LM Kammprofile gasket with outer ring (split type) Model 410LM split type Metal toothed gasket with outer ring, can choose richer metal, e.g. carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410L, and the lining metal can be repeatedly used. Product application: GOT toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25Mpa Selectable material: Metal material German trademark Hardness Temperature íµ Density g/cm3 Thichness mm Carbon Steel 1.1003/1.0038 90~120 -60~500 7.85 2 3 4 SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other metal on require Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; PTFE, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm

IX Seal and Other Machined Components: IX Gaskets or IX Seal are exclusively designed to suit the seal requirement in Compact Flanged Connections. IX Gaskets The dimensions of IX seal are as per NORSOK L005 and material qualification is as per NORSOK M650 and NORSOK M630 IX seal comes with a PTFE/XYLON coating, the color of the coating identifies the material used to make the IX seal IX seal numbers are from IX 15 to IX 1200 Other machined components are as seen in the picture, which is machined as per the customer provided drawings, this normally comes with a Silver Coating which is done in-house

Spiral wound and connected its end and beginning by dot welded. Depend on its excellent compression resilience it is suitable for sealing spots where the alteration of temperature and pressure are frequent. It can be used as the static sealing element of pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. It has been widely applied in the fields of petrochemical, mechanical manufactory, power station, metallurgy, shipbuilding, medical and pharmaceutical nuclear power station and navigation, etc. Other items in : gasket spiral wound gasket » inner and outer ring of swg On request