Double barrel telescope
This is a beautiful 1m (100 cm) double barrel telescope and fine polished wooden tripod tilting stand. The 52 mm object glass produces a sharp image and enlarge its field. It is focused by rotating a large adjusting drum wheel near the eyepiece. A sighting telescope that can be adjusted from 9.5 to 13 inches (24 cm to 33 cm) in length, a main eyepiece on the primary telescope that extends over 2 inches for exact focusing. The tripod legs extend from a length of 37 inches (94 cm) to 63 inches (160 cm), so that the telescope can be positioned for comfortable observation. The telescope can be easily removed from the collapsible stand. The telescope itself has a full 360-degree horizontal range of motion around the tripod, and 180 degrees vertical.
The telescope is designed keeping in view the requirements of a nautical scope - i.E., greater field of view. More the magnification. The 52 mm lens gives the best combination of steadiness and field of view with magnification.This telescope has been designed as a terrestial scope and not for astronomical observations.
We are engaged in manufacturing a wide range of brass telescope double barrel with wooden stand to meet collection needs of our clients. These telescopes have double barrel and a wooden stand to support it while viewing. Manufactured using premium quality wood and brass this product is engineered with precision for efficient functioning. We have the ability to customize these products as per the requirement of our client at competitive prices. Size 1 meter double barrel, weight 10kg with export packingdimension 1meter.
Supplier: Packaging Products
Buyer: Paper Bag Making Machine
Supplier: All types of precision optical components, lenses, prisms, optical flats, filters, photo enlarger lens, objectives for telescopes, eye peices, plano convex lenses, double convex lenses, concave lenses, acromats, doublets, triplets
Buyer: Optical glass, consumables used in lens polishing, vacuum coating plant
Supplier: Marine chemicals, gases & welding equipment, refrigerants & equipments, dosing units seawater treatment, freshwater generator, boiler water treatment, soot powder, fuel oil treatment, cooling water treatment, fuel oil treatment, sewage treatment, water test kits for boiler & cooling water treatment , test kits for pwt & sewage legionella, fuel and lube oil test kits, wall wash test kits, pumps with accessories barrel pumps, chemical applicators, double diaphragm pumps, grease pumps, cleaning equipment mobile high pressure cleaners & accessories, gargo hold cleaning kit & accessories, ultrasonic cleaning machines
Services: Export, shipping
Buyer: Marine chemicals
Double-ended Pogo Pin Test Probe SCPA100 for IC Inspection Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. This product SCPA100 Â we will introduce is 1 Â mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Â Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
Spring Pogo Pin Semiconductor Test Probe SCPC028 Applied to IC Inspection Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. This product SCPC028 we will introduce is 0.28 mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production. The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold or gold clad phosphor bronze. The bottom plunger is made from beryllium copper plated with nickel and gold. The top plunger is made from SK4 plated with nickel and gold. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 2 amps. The typical maximal contact resistance is about 150 milliohms. The plunger can be pressed at a distance of up to 1.05 mm. But it is better to be pressed at a distance of 0.7 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.7 mm, the loaded force is about 25 gf, which fluctuates to a tolerance. For details, please check parameters in below table. Materials (plated) Barrel: Phosphor Bronze/Gold Clad Phosphor Bronze, Au on Ni Plated Bottom Plunger: Beryllium Copper, Au on Ni Plated Top Plunger: SK4, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Electronic Specification: Current Rating: 2 amps Contact Resistance: 150 milliohms max Bandwidth: 8.5 GHz at -1dB Inductive Reactance: 1MHZ at -0.0788 uH Capacitive Reactance: 1MHZ at 0.3165 uF Specifications: Full Stroke: 1.05 mm Rated Stroke: 0.7 mm Spring Force: 25�±7 gf at load 0.7 mm Mechanical Life: about 100000 cycles Company Information: Centalic Technology Development Ltd was founded in 1980.Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Semiconductor Test Probe Pogo Pin SCPB038 for IC Inspection Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. This product SCFB038 we will introduce is 0.38 mm in barrel diameter and 6 mm in total length. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production. The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 1.5 amps. The typical maximal contact resistance is about 100 milliohms. The plunger can be pressed at a distance of up to 1 mm. But it is better to be pressed at a distance of 0.6 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.6 mm, the loaded force is about 25 gf, which fluctuates to a tolerance. For details, please check parameters in below table. Materials (plated) Barrel: Ph, Au on Ni Plated Bottom Plunger: BeCu, Au on Ni Plated Top Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Electronic Specification: Current Rating: 1.5 amps Contact Resistance: 100 milliohms max Bandwidth: 5.3 GHz at -1dB Propagation Delay: 27 ps Inductance: 1MHZ at -0.02809 uH Captance: 1MHZ at 0.876347 uF Specifications: Full Stroke: 1 mm Rated Stroke: 0.6 mm Spring Force: 25 7 gf at load 0.6 mm Mechanical Life: about 200000 cycles Company Information: Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Telescopic Pole Saw JR2975P Turn the bolt on the side clockwise until it loosens to the degree you want, then turn and tighten the bolt by turning it clockwise. Pole Parts - Material : Aluminum - Film Coating to prevent corrosion - Groove for preventing the connected pipes from rotating and minimizing the total weight with the pipes solidified. Handle & Joint parts - Material : Plastic - More solid fixations by adopting the double fixing device with tightening and suspending devices connected. - Angle-adjusting device makes it more convenient to work under any condition. - 6 levels of working processes are available from the longest to the shortest. Use - For garden pruning and trimming - For forest industry
