PSK series crushers, which are jaw-adjusted impact crushers, are crushers that break medium and high hardness materials (such as limestone, dolomite, granite and basalt) in the size of asphalt and concrete aggregate. Coarse material feeding, cubic product, high reduction ratio, high capacity, low investment and operating cost have made this type of crusher the ideal secondary crusher in crushing and screening plants.
The stone entering the crusher hits the crushing elements in the first region with the swing of the rotor hammers and the first crushing stage takes place. In this region, high pressure and breaking power are created to break even very hard materials. If the crushed material is in the desired dimensions, it passes to the second zone. The material passing to the second zone passes through another crushing stage and is reduced to smaller sizes. Then the material passes to the third and last zone and the final crushing process takes place. Now the material is reduced to the smallest dimensions.
ADVANTAGES
Wear-resistant crushing elements
High crushing capacity
High reduction rate
Hydraulic body opening
Possibility to use both sides of the pallets
series Secondary Impact Crusher provides to meet the needs at every level with its high capacity and performance. Time-saving thanks to quick and easy installation. Series Secondary Impact Crushers can crush medium and high hardness materials such as limestone, dolomite, granite and basalt to the size of asphalt and concrete aggregate. Large size material from the primary crusher can be fed directly. High reduction rate is provided. It is the most preferred secondary crusher type in crushing and screening plants since the initial investment and operating costs are lower than other crusher types. According to the design of the facility, they can be manufactured as mobile, with fixed steel feet, with fixed concrete feet, with fixed skid chassis, pre-screened or pre-fed. The Secondary Impact Crusher is shipped in accordance with international shipping standards. Technicial Specifications Capacity: 200-300 t/h Rotor Diameter: 1150 mm Rotor Width: 1500 mm Max. Feed Size: 300 mm Power: 250 kw Weight: 16250 kg Please CALL us for our other Stone Crushing Machines and customer-specific solutions.
Supplier: Jaw crushers, primary impact crushers, secondary impact crushers, sand machines, t type sand machines, vertical shaft impact crushers, vibrating screens, bunkers and vibrating feeders, bunker feeders, conveyors & silos, hydraulic classifiers & jigs, spiral washers
UMA-1415 series Mobile Primary Impact Crusher Unit has been designed to meet the needs of our customers with compact solutions such as hydraulic feet, foldable conveyor and bunker chamber options that provide the advantage of easier installation in a shorter time. With its high capacity and performance, it ensures that all needs are met. The Mobile Primary Impact Crusher Unit is shipped in accordance with international shipping standards. Technicial Specifications Capacity: 250/600 t/h Feeder type : UMG04 - 2x9,2 kw Bunker Volume: 1 unit - 40 m Crusher Type: 1 unit CDK1415 250-315kw Crusher Output Band: 1200x8000 - 11kw UMA-110 Mobile Primary Jaw Crusher Equipment: Primary Impact Crusher (CDK1415) Vibrating Feeder UMG04 Mobile Chassis with axle and tires Hydraulic Feet Folding Type Belt Conveyor Please CALL us for our other Crushing plants and customer-specific solutions
UDK900 series Vertical Shaft Crusher, with its high capacity and performance, provides to meet the needs at every level. UDK Series Vertical Shaft Impact Crushers are preferred at the last stage of the crushing and screening process. They have a high production capacity. It successfully performs to break wet, moisty and sticky materials. Moreover, such fed materials get rid of some of the water in the body with the kinetic energy that emerges when it collides with the rotor rotating at high speed. Therefore, the end material is relatively drier. Thanks to these advantages, it is highly demanded for use in the production of sand and gravel necessary for concrete and asphalt production. Depending on the design of the facility, it can be manufactured as mobile, with fixed steel legs, with fixed skid chassis or with front feed. All of our products are CE certified Vertical Shaft Crusher is shipped in accordance with international shipping standards. Technicial Specifications: Capacity: 100-200 t/h Rotor Diameter: 900 Power: 2x200 kW Weight:13000 kg Max. Feed Size: 40 Please CALL us for our other Stone Crushing equipment and customer-specific solutions
Impact Crusher is mainly used to crush many kinds of large, medium, small materials whose side length is less than 500mm, and compression resistance should not be more than 350Mpa. The impact crusher is widely used in hydroelectricity, highway, artificial stone and sand, building material, etc. Working Principle of Impact Crusher: When the impact crusher works, the motor drives the rotor rotate of the impact crusher with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers effect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being recrushed. The materials from large to small all to be crushed at the impact chamber repeatedly. The process woní»t stop till the material are crushed to the required size and then discharged from outlet of the impact crusher. Characteristics of Impact Crusher: Special structure, connected without key, high chrome hammer, unique impact liner, deal with hard material, high efficiency and save energy, cubic shape of product, adjustable output size. standard packing
We provide installation work and operational training for all of our equipment ! Vibrating feeder is a part of stone crushing equipment used for constant feeding of product to the crusher from loading bunker. Vibrating feeder is placed on springs from all sides for easy vibration. Grizzly part of the feeder allows to remove soil coming from the nature together with the stone pieces. Vibrating feeder can be manufactured in different width and length depending on bunker structure and total per hour capacity of the plant. Grizzly part can be single or double staged, depending on soil amount of the loaded product.
---------Description--------- ! We provide installation work and operational training for all of our equipment! Mobile Screening & Sand Washing Plant is a single-chassis solution for stone, sand other mineral quarries where the product needs to be sorted out and washed to get clean and ready-for-usage construction aggregate. Being one of the developed solutions for the stone crushing field, all parts of the line are constructed on a single chassis, where attachments like additional bunker walls, walking platforms, and conveyor belt are of foldable design. DISTINCTIVE FEATURES OF THE MACHINE: 1. Compact design: loading hopper, vibrating screen, screw sand washer, conveyor belts, diesel generator & walking platforms are installed on a single mobile chassis. 2. Easy transportation: machine can be transported with a single truck head. 3. Fast assembly and dismantling work: assembly work of the machine takes only 2 days. 4. Screening & Washing of the product: a combination of screening & sand washing processes can be performed with a single machine in place. 5. Stocking: foldable design conveyor belts are supplied with hydraulic pistons, which allow for the assembly of conveyor belts from a control panel to easily. Mobile Screening & Washing plant models are: SMSW 1240 600x6300 mm Single Helix / 1200x4000 mm screen / 60-100 T/H SMSW 1650 600x6300 mm Double Helix / 1600x5000 mm screen / 150-200 T/H SMSW 2250 800x8000 mm Double Helix / 2200x5000 mm screen / 250-320 T/H
---------Description--------- ! We provide installation work and operational training for all of our equipment! Fixed Sand Screening & washing Plant is one of the solutions in the manufacturing quarries, where crushed stone products or any type of construction aggregate need to be sorted into fractions for the further use. Aggregate sorting plant can be used for both stone and sand products, as long as it is mixed of different fraction sizes. Also, sorting plants can be supplied with sand washing system, so that clay and sand crushed out from the main product is washed away, to be readily usable at the end. Equipment consists of: 20 m3 feeding bunker 2200 x 6000 mm vibrating screen 750 x 7500 mm double helix screw washer Feel Free To Contact Us For Any Additional Information!
Tertiary impact crushers are high-speed machines that are used to obtain sand. The material entered into the machine exits the machine after that it is hit against the walls and crushed by a high-speed (800 r / min) rotor. The material generally left over the screen is broken in these crushers, which usually are used to obtain 0-5 mm sand.