Auto Parts And Molds

Auto parts mold

Simultaneous Injection-Decoration System (IMD/IML) : This technology widely used in automotive (mobility), consumer electronics, home appliance and medical devices, and supports customer to achieve unique CMF finish on mechanical parts with high quality and productivity. IMD, IML are products which add patterns and functions on the products surface at the same time as molding, by sandwiching a film with patterns or functions in a mold and pouring the melted resin into it. We can provide unique features on your product surface which cannot not be added by conventional process like painting, silk printing or pad printing. We can even add electric functions such as touch sensors / buttons and LEDs to your product surface with NISSHA IME solution. IME (In-mold Electronics) is a module product which integrates touch sensors, light source heater, etc. into a plastic panel. We can also do general molding with variety of colors, materials and finishes that suit your preference. If you already have in-house injection molding machine, we can also source you high quality heat transfer foils. Application: automotive display, CID, touch screen, car ornament, auto accessories, console, headlamp, audio panel, automotive interior, automotive exterior Pattern : Hair Line, Marble, Wood grain, Leather, Fabric, Metal look Feature : Hard coat, 3D Geometry, Hidden lit, Touch sensor Size : various sizes Capacity :100 - 650 tonnage injection molding Additional functions: Anti

Mould base:LKM Mold material: Good quality steel such as P20, 718H, NAK80, 1.2311, H13. Lead time:4-6 weeks. Mold building capability:20-30 sets/month.

The specification of the aotu part mould: 1, material of mold: high-quality steel: p20, #45, h718 2, cavity: single 3, runner: hot runner 4, cycle time: 40s 10ton

Plastic injection moulds.

Products Name Auto Parts Plastic Injection Mold Manufacturer injection plastic mold Mold Material NAK80,S136,2316,2738,H13,5CrNiMo,718H,P20,40Cr,60#45#etc Mould Cavity Singe or multi cavity Sprue Gate Hot runner,Cold runner ,Pin -point gate,Submarine gate,etc Plastic Material PP,PC,PS,PAG,POM,PE,PU,PVC,ABS,PMMA,etc Processing Stamping, deep stamping, bending, punching, threading, welding, tapping, riveting Mold Life 300000-500000 shots Inspection IQC, IPQC,FQC,QA Application All kinds of cars, machinery, home appliance, electronic products, medical devices, stationery, computers, power switches, miniature switches, architecture, commodity and A/V equipment, sports equipment and gifts etc.

Ms-mold is a leading mold manufacturer in chang an town, dongguan china. We are professional with a wide range of odm & oem services, such as automotive, home appliance, medical & communication, office automation devices, aeronautics, iml & imd, precison parts(including gear, insert parts, precision connecter) and mold components etc.

plastic molded auto parts Complex Automotive Plastic Molding , Auto Plastic Injection Molded Parts Product Name oem plastic molded auto parts Mold Shaping (double injection/overmolding/insert molding/multi-cavity/hot runner) Colors You provide us PANTON# and we will match the colors Mold Base LKM & HASCO & DME Mold Material NAK80,S136,H13 ,718H,P20,and so on Mould Cavity Singe or multi as your requirement Sprue Gate YUDO runner ,Hot runner, Cold runner ,Pin -point gate, Submarine gate, etc Design Software UG,PROE,CAD etc Plastic Material PP, PC, PS, POM, PE, PU, PVC, ABS, PMMA, etc Mold Life 300,000-1,000,000 shots Delivery Time 15-35 working days Packaging Wooden Cases or as per requirement Transportation By sea or by air as your requirement Specification As your requirement OEM /ODM Order YES Shanghai Elue is focus on produce plastic injection, plastic molded auto parts, plastic injection auto parts, overmolding electronic parts, plastic moulding part and other products. We have a whole set of quality management system to guarantee the quality of our products as well as after sale service.

Gas-assisted injection molding technology features (1) The design of the mold cavity should ensure the flow balance to reduce the uneven penetration of the gas, and ensure the flow balance is also a design principle of the common injection molding mold, but this is more important for the gas-assisted injection molding products. (2) The mold design should consider the influence on the process parameters, because gas-assisted injection molding is much more sensitive to process parameters than ordinary molding. In injection molding, small differences in mold wall temperature or injection volume can lead to asymmetry of gas penetration in symmetrical parts. Gas-assisted injection molding equipment (1) Ordinary injection molding machine (the metering accuracy is slightly higher). (2) Nitrogen control system, including self-sealing gas-assisted nozzles. (3) High pressure nitrogen generator. (4) Industrial nitrogen cylinders and air compressors that provide supercharged power. (5) A mold designed and manufactured for gas-assisted injection. (6) Gas-assisted injection molding gas auxiliary nozzle The nozzle air intake mode uses a special self-closing gas-assisted nozzle. After the plastic injection is finished, the high-pressure gas directly enters the plastic inside by the nozzle, and forms an extended closed space-air cavity according to the air passage and maintains a certain pressure until the pressure is maintained. Cooling, before the mold is opened, the nozzle is forced to separate from the product channel by the backrest of the table, and the gas is discharged from the product. (7) gas needle The air needle intake method is to install an exhaust deviceâ??a gas needle at a specific position of the mold. When the plastic is injected into the cavity, the gas needle is wrapped inside the plastic; at this time, the high-pressure gas is discharged, and the gas needle forms an extended closed space-air cavity according to the air passage inside the plastic, and maintains a certain pressure until cooling, and the mold is opened. Previously, the gas in the air chamber was discharged from the interior of the plastic by the control device by means of a gas needle.