220V 5A Relay

Product description Single-phase standard power supply is suitable for power department, quality control department, research units, institution of higher learning, electric energy meter, power supply management, load control, power quality, reactive power compensation device and production of the enterprise and so on. It can be as single phase voltage source, current source and power source. Electrical parameters Electrical parameters Accuracy class 0.05%, 0.1% Power supply Single phase AC 85-265V, 50/60 Hz AC Voltage output Range 57.7V / 100 V / 220V / 380V, Switch automatically (max 500V) Adjustment resolution 0.01%, 0.1%, 1%, 10%, AC Voltage output Range 57.7V / 100 V / 220V / 380V, Switch automatically (max Adjustment resolution 0.01%, 0.1%, 1%, 10%, Accuracy 0.05% RG Stability Better than 0.01% RG/1min Distortion degree Better than 0.1% (not capacitive load) Load capacity 40VA Full load regulation rate Less than 0.01% RG Full load regulation time Less than 1ms Temperature drift 8 PPM C Long-term stability 60 PPM/year AC Current output Range Adjustment resolution Accuracy Stability Distortion degree Load capacity Full load regulation rate Full load regulation time Temperature drift Long-term stability 0.1A / 0.25A / 0.5A / 1A / 5A / 10A / 20A / 50A / 100A, Switch automatically 0.01%, 0.1%, 1%, 10%, 0.05% RG Better than 0.01% RG/1min Better than 0.1% (not capacitive load) 40VA Less than 0.01% RG Less than 1mS 8 PPM C 60 PPM/year

1.Power:300w/500w/800w 2.Charged by solar, wind tubine, ac, dc 3.With light weight , small size , easy to carry. 4. Output:ac 110v/220v/240v, dc 12v 5a, usb 5v3a . 5. Transformation efficiency over 95%. 6.Protection function:alarm and close when low voltage, short circuit, disconnect recovery, over load protection, Size:70*170*360mm/70*170*360mm/70*170*360mm Weight:3.0kg/4.2kg/5.0kg Packing size: 150*320*430mm/150*32*430mm/150*320*430mm Grass weight4.7kg5.9kg6.7kg

CB-212 is advance three phase 3 wire APFC display provide user-friendly interface and ease of access to parameters for manual setting built-in power analyzer allowing the instantaneous display of any electrical parameter (voltage current reactive power harmonics etc. With THD protection function not affected by the harmonics can protect capacitor from harmonic interference. Max 12 step control 5A/250V relay output or 12VDC output. Optional RS-485 communication port easy for user connect to PLC and build SCADA system. Higher measurement accuracy(0.5) and system stability it is cost effective ideal for OEMs and panel builders solution. FEATURES I / U / KW / KVAR / HZ / COS measurement and display 93*70 LCD display Anti-harmonic design Max 12 steps capacitor control

Waveform: sine wave Battery pack: 577Wh, 156000mAh (4S15P60 only 2600) Rated power: 600W peak 1000W Battery Type: High Quality Lithium-Ion Battery (Universal Lithium Charges 600 Times, No Memory, About 85% Storage Capacity After 600 Charges) Replaceable LIFE PO4 iron-lithium battery 3.2V 4S7P 32.2Ah (iron-lithium 412WH) rated power: 600W AC: AC 110V-220V 60/50Hz DC: Adapter 22V/5A (110W), fully charged in about 6.5 hours Solar: Anderson Interface 120W MAX (5A 18-24V) 1TPYE-C::20V/3A 60WMAX (double-pass), with DC charging can be fully charged in about 4 hours The output is pressed by, AC output: 220V 50Hz/110V 60Hz/50hz (three US/Japanese standards, two national standard outputs) Four DC outputs DC:13.2V/10A(MAX)132W 3 USB-QC3.0: 5V/3A, 9V/2A, 12V/1.5A 18W MAX1TPYE-C: 20V/3A) (double pass) Car charger output: 13.2V/5-10A MAX Lighting: 4W LED (long light mode/brightest mode/SOS mode/strobe mode) Certificate: ROHS, TCT211104C013C Charging temperature: 0~40 (32~104F) Discharge temperature: -10~60 (14~140F) Storage temperature: -20~45 (-4~113) Use cycle:500 times Safety protection: multiple protections (short circuit protection, over temperature protection, over current protection, over discharge protection, over voltage protection, overload protection, low voltage protection, etc.) Product size: 286X150X158MM Outer box size: one pack: length 348 width 235 height 315mm Outer box size two packs: length 498 width 360 height 340mm Net weight: 6.6KG Gross weight: 8.4KG (including outer box) Color: black, silver (customization) Input conversion: 90% Output conversion: the effective conversion rate of the inverter is 92%

Stablizer Servo motor type: Single phase or three phase With led, lcd, or digital display Input 110/220v Capacity:0.5kw---60kw Relay type Single phase Wide input voltage range Input 110v/220v Capacity:0.5kw--10kw Compensating type Single-phase or three-phase Capacity:10kw---200kw of single phase 10kw--5000kw of three phase Full-automatic compensating power voltage stabilizers +large capacity, high efficiency, no waveform distortion, stable voltage control The protection against the over voltage, over current, phase shortage, phase-sequence and the automation protection Balance three-phase output automatically ( option ) Microcomputer-controlled non-contacting ( option ) Have special design for elevator/ct Purification type Capacity:0.5k--100kw, Input voltage:110v/220v Single phase or three phase Taking the voltage stabilization and purification High precision (1%) Quick speed in dynamic response Low distortion High adaptation to overload High resistance to electromagnetic interference

CE-D-type three-phase AC intelligent digital display is a programmable function, automatic measurement, digital display, the cumulative power, the standard analog, switch, RS485 output and other functions of the integrated power parameter detection instruments. With high precision, good electromagnetic compatibility, good looks and so on. Can be set according to demand voltage, current, power, power factor and any one of the corresponding standard analog output; any set voltage, current limit, hysteresis, upper limit alarm or lower limit alarm and other parameters; Free to set the communication address (0-255), display ratio and so on. Accuracy class: 0.5, 0.2 (current, voltage) The maximum display: 9999 Maximum resolution: Voltage: 0.1V Current: 0.001A Input: 500V * 5A Analog output: 0-5V 4-20mA Communication output: RS485 (baud rate: 9600bps; data format; start bit 1, data bit 8, stop bit 1, no parity) Switch output: a group of relay contact output, contact capacity 5A / 250VAC Function settings: switch control value, back to the difference, the working mode; analog output mode and input mode; the address; display variable ratio; screen display parameters of the switch. Auxiliary power: 85 ~ 265V Power consumption: â?¤ 4.5VA Isolation voltage: power supply / input / output between â?¥ DC2.5KV / min.1mA Pulse group interference: 1.6KV Power against lightning surge: 4KV Shell material: ordinary plastic Face plate installation, behind the wiring Dimensions: 96 Ã? 96 Ã? 110mm Installation hole size: 91 Ã? 91mm

I. The Brief Introduction. Panel mount digital energy meter LCD multi-function power meter with power pulse output RS485, DI DO analog output function. Panel mount digital energy meter LCD multi-function power meter with power pulse output RS485, DI DO analog output function is one multifunctional instrument with measurement, display, digital communication and input, output, etc function. It can measure multiple electrical parameters such as current, voltage, power, electric energy, frequency and power factor in the power grid. With power pulse output and RS485 communication function. With large screen LCD screen. There are a variety of extension functions to choose from. Four-way discrete input; Four-way discrete output; Four-way variable output. LCD multifunctional power meter has high performance-price ratio, can replace traditional multiple measuring instruments, convenient field wiring, and improve system reliability. Modbus communication protocol for easy computer programming or reading data. Widely used in a variety of power distribution, metering and various power collection, transmission systems. II.Functional module, LCD multi-function power meter with power pulse output and RS485 communication function, large screen LCD display meter *Communication interface: standard 1 way RS-485 communication, Modbus-RTU protocol, baud rate: 9600bps. *Discrete output: support 4 way relay outputs, capacity: AC250V/5A, DC30V/5A. *Discrete input: support 4 way dry node inputs. *Transmission output: support 4 way simulation outputs, 4-20mA/0-20mA or 0-5/0-10V. *Power pulse output, 1 way active energy, 1 way reactive energy pulse output, constant: 3200imp.

The Cellular Electricity Power IoT RTU is a powerful smart meter used for power internet of things solution, is special using for remote monitoring 100~400VAC of 3-Phase electricity power distribution safety and measurement, can measuring the 3-phase 3-wire, 3-phase 4-wire distribution power voltage, current, factor, watts, frequency, apparent power, active power, reactive power, active energy, reactive energy. Also, it provides Dual SIM, 2 digital inputs, 2 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, also 1 RS485 for extend I/O to monitoring oil level and temperature or read meters. 1. Can be operated from anywhere, no distance limitation; 2. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside. 3. 3G/4G/NB-IoT Modules are optional, LCD Display is optional; 4. Modular design, can easily upgrade the cellular module if network upgrade; 5. Embedded ARM�® Cortexâ?¢-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with anti-jamming and in-built watchdog; 6. High isolate voltage, current and voltage input signal isolated by accuracy transformer, afford arrive DC2500V; 7. Working Voltage: 60~500VAC or 70~800VDC; 8. 3-phase 3 wires or 4 wires power parameter measurement, include voltage, current, factor, watts, frequency, apparent power, active power, reactive power, active energy, reactive energy, phase loss; 9. Measurement range: AC100~400VAC, currant range: 5A, other range should use CT; 10. 2 digital inputs, compatibles dry and wet contact, 2 relay output (5A/30VDC, 5A/250VAC), compatibles pulse outputs; 11. 1 ambient sensor input for monitoring onsite temperature and humidity ; 12. 1 RS485 port, supports Modbus RTU Master and Slave, can be used to extend I/O ports or meters; 13. Provides 1 channel DC power source output for external device, saving wiring cost; 14. Each parameter can setup threshold, when exceed or recovery will alarm immediately; 15. Can monitoring phase loss, when occurs will alarm immediately. 16. Inbuilt inter-lock logic programmer and powerful timer program function. 17. Resend the data while communication failure and alert to users by SMS; 18. Inbuilt TCP/IP protocol stack, supports cloud, APP and web server applications; 19. Supports Modbus TCP, Modbus RTU protocol and transparent transmission, can be used as master and slaves, can integrate to SCADA, HMI, DSC directly; 20. Supports USB setting, reading, records inquiry and firmware upgrade;

Power: single phase, 220v:0.4kw-2.2kw Three phases, 380v:0.75kw-630kw Output frequency:0-650hz Voltage, undervoltage, over temperature, open phase, overload.... Totally 23 situations. 7.Speed control ratio:1:100 (svc) 8.Carrier frequency:1~15.0khz Main features Compact size and less weight. Combined module for 3.7kw or below with high reliability. Reasonable layout with less interference and better ventilation. Combined module with perfect reliability. 3 control modes available: vf control, sensorless vector control, torque control. High start torque: 0.5hz, 180%(vector control) 16 steps speed control, simple plc function, pid function 7 digital inputs(including 1 pulse input), 2 analog input and 2 analog output, 2 relay output, 1 open-collector output. Automatic output voltage regulation(avr) Rs 485 interface(modbus rtu communication protocol) Packing: 1set per carton or wooden case Weight:>1.5kg Dimensions:>132mm*74mm*162mm