Bake Hose Assembly

1>Brake hose: SAE J1401 standard +Motorcycle brake hose: 3.2mm X 10.5mm 1/8"HL +Automobile brake hose: 3.2mm X 10.5mm 1/8"HL 3.2mm X 12.5mm 1/8"HL 4.8mm X 12.5mm 3/16"HL 2>Air brake hose: SAE J1402 Standard 10mm X 17mm 3/8"HL 10mm X 19mm 3/8"HL 13mm X 22mm 1/2"HL 3>Stainless steel braided brake hose: 3.2MM X 6.5MM 3.2MM X 7.5MM 4>steel tubing for various coating: copper,polish,white zinc,pvf,olive green,etc. 4>Hose assembly: any kinds of hose assembly can supply to you, and made according to OEM No. or your drawings or samples 5>Fittings & brake pipe & brake tube & nuts: any kinds of hose fittings according to your drawings or samples, or our drawings. 6> Hose crimping machine and mould and Stainless steel braided brake hose and Fuel hose, air conditioning hose...

ROTARY / DRILLING / CEMENT / MUD HOSE Main Application: The rotary/drilling hose is used in oil drilling industry, bore-hole operation and washing, used on drilling rig for delivering petroleum�¬based fluid: water cement, mud . Applicable Specs: API Spec 7K Temperature Range: -40F/ +212F -40C / +100C Construction Detail: Inner Tube:Oil and abrasion resistant synthetic rubber Reinforcement: Multiple high tensile steel wire spirals Cover:Oil, ozon, hydrocarbon resistant Synthetic rubber

Jacketed Hose assembly consists of a hose within a hose. An inner (Core Hose) or primary media conveying hose is enclosed or jacketed by a larger diameter hose. The hoses are joined at each end by specially designed fittings so that there is no media pathway between the two hoses. Jacketed Hose assemblies are often specified when the primary media must be kept at either an elevated or cryogenic temperature. Steam is often circulated through the jacket hose to keep a viscous material in the inner hose hot and easily conveyed. A vacuum can also be pulled on the jacket hose to insulate cryogenic liquids being conveyed in the inner hose. The media typically is steam, hot oil or hot water to raise the temperature of the fluid moved in the internal hose. Also cold products such as liquid helium or nitrogen can be used to lower the temperature of the fluid with-in the internal hose. Jacketed hose assembly with inlet and outlet swivel flanges fitted with both side swivel flange) and sometime threaded also use, inlet and out let of jacket hose's fitting can be threaded type also, and length of hose assembly depends upon the how much heat area require to maintain. For more Detail of fitting see the following table These hoses are used to transfer high density fluid, like bitumen, pre polymers, hot melts etc

INDUSTRIAL HOSE ASSEMMBLIES MANUFACTURERS & SUPPLIERS We have in-house design facilities for industrial hose assemblies, wherein we regularly manufacture annular normal & heavy-duty stainless steel hoses for highly critical applications. Generally, industrial hose assemblies are tailor-made to meet individual requirements. There are different kinds of standard end fittings connected to the hose and braid as per specific needs. The process consists of assembling the hose and braid of specific lengths, followed by connecting the end-fitting by TIG welding. For various processes, superior quality industrial hose assemblies with high heat and pressure tolerance are required to transfer fluids and gases. An industrial hose with resistance to different chemicals is also required for a seamless process and quality output. Thus, we offer flexible, durable, and high-performance industrial hoses that'll help reduce production downtime while providing optimal safety Description What Do We Offer? At Aeroflex, we offer highly-engineered industrial hose assemblies, couplings, and accessories for a wide range of applications. We undertake rigorous testing of all hose assemblies before it is shipped to ensure it complies with the highest standards and regulatory requirements. Our hose assemblies are also tested under harsh environmental conditions. This ensures only the best is provided to our clients that maximises their output value while minimizing downtime. Specifications for Industrial Hose Assemblies All industrial hose assemblies are custom-made, including the standard specifications of end fitting. Right from the hose length and braid to the temperature range and maximum working pressure, each would differ based on the need of an application. You can email your requirements to us at indiabusiness@aeroflexindia.com or get in touch for further queries. Advantages of Industrial Hose Assemblies Industrial hose assemblies have a sturdy construction and are made from the finest grade materials. The connectors are made from stainless steel and come with interlocking protection. They are flexible, durable and highly reliable. They undergo stringent testing to ensure safety and optimal quality assurance as per industry standards. They have a high tolerance to heat and pressure. They are corrosion resistant and resistant to abrasive materials. They also have chemical resistance properties, making them ideal for almost all industrial applications. Applications of Industrial Hose Assemblies Industrial hose assemblies are used to convey various fluids (gas, water, chemicals) and even solid material from their source to machines. The applications of industrial hose assemblies include: Food and Beverage Industry Material Handling Construction and Mining Chemical and Pharmaceuticals Oil and Gas Automotive and Steam Agriculture General Manufacturing

Drilling Hose is mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission. In addition,BOPcontrol hose is widely used in these fields.

KST brand brake hoses are DOT certified quality products. Made according to SAE J1401 standard, meet and surpass FMVSS 106, ISO 3996 etc international safe standards. Feature: Original Equipment quality. Six years average life at least Output strong braking power, Every hose is 100% pressure testing at 3500PSI. 3000 KST numbers cross reference Delphi, Wagner, Bendix, Reybestos, CEF, Keybol, ATE, Meyle, Febi etc 100 famous companyí»s numbers and more than 10,000 OEM numbers. Suit American, European and Asian (Japanese, Korean, Chinese, Indian) etc. all passenger vehicle, light commercial vehicle and classic cars series vehicle with hydraulic brake system. American series: GM, FORD, CHRYSLER GM: Buick, Cadillac, Chevrolet, Daewoo, Oldsmobile, Pontiac, GMC etc. FORD: Falcon, Lincoln, Mercury, Mustang, Fairmont, Granada, Tunderbird, Grand Marquis etc Chrysler: Dodge, Jeep, Plymouth, Studebaker etc. European series: Audi, BMW, Mercedes Benz, Opel, Volkswagen, Volvo, Saab, Jaguar, Renault, Rover, Land Rover, Alfa Romeo, Fiat, Citroen, Peugeot, Seat, Talbot, Lancia, Vauxhall, Skoda, Lada, Yugo Zastawa, Iveco etc. Asian series: Toyota, Honda, Nissan, Mitsubishi, Suzuki, Isuzu, Subaru, Mazda, Daihatsu, Proton, Hyundai, Kia, SsangYong etc.

1.Bracket All parts stamped from mild steel and chromoly, stainless steel. Connector tabs, Mounting Tabs & Retaining Clips, Lock Tabs,Frame Tabs, Brake hose bracket, Brake Line Tab, Caliper Brackets, Brake Strut Rod Brackets, Brake Tabs, Pedal Plates, etc 2.Rubber Accessory Made with EPDM rubber long time life feature and exact size for different brake hoses. Plastic clamp 3.Banjo bolt Can be made of mild steel, stainless steel, brass material. 4. Copper washer Widely using for hydraulic brake system parts like caliper, master and wheel cylinder, banjo bolt etc for high pressure sealing power. 5. Brake hose clip 6. Protector spring Two types spring as protector for brake hoses. Metal spring and Nylon Spring. Can be cutted in any length as request. BRAKE LINES ACCESSORY: 1.Tube nut Can be made of mild steel, stainless steel, brass material. 2.Brake adapter fitting, brass tee Made of mild steel, stainless steel, brass material. 3.Bleed screw Can be made of mild steel, stainless steel, brass material. 4.Union, Joiner Made of mild steel, stainless steel, brass material. 5.Locknut. Can be made of mild steel, stainless steel material.

Stainless Steel Hoses and Hose Assemblies Stainless steel corrugated flexible hoses are offered from 6mm (1/4’) to 300 mm (12’). The annular corrugated hose body provides the flexibility and pressure tight core of the assembly. Lance Hoses An import substitute product, developed and manufactured by us. These hoses distinguish themselves due to their good performance in adverse and hostile conditions. These ultrasonically cleaned and degreased hoses are pressure sealed, leak proof under vacuum condition and can be used with or without inside interlocked liner. Advantages of Flexible Metal Hose - Suitable for wide temperature range (-270°C to700°C). - Compensates for thermal expansion contraction in the piping system. - High physical strength. - Fire resistant. - Moisture resistant. - Longer life. - Good corrosion characteristics. - Resistant to abrasion, penetration and damage. - Connects misaligned rigid piping absorbs or dampens vibration and similar equipment. - A flexible and quick option for rigid piping in difficult locations. The fitting are available in Mild Steel, Carbon Steel, Stainless Steel, Brass, Gun Metal, Rolled bronze. Flange connection with fixed & floating flanges to meet IS, DIN, ANSI* ASA standards or as per customer's specification.

Mine hose assembly supplier Description: Mine hose assembly supplier structure The three-layer structure of the inner rubber layer, skeleton reinforcement layer, and outer rubber layer; due to the special environment of a coal mine operation, it is generally required to provide protective devices such as hose sleeve, sheath, and reel. Mine hose assembly supplier characteristics According to the specific application type of mine hoses, coal mine hoses have wear resistance and oil resistance characteristics; for coal mine, hydraulic support hoses, high-pressure resistance, and high pulse resistance characteristics are required; for different application areas, for extremely cold areas, mines The hose needs to have the function of cold resistance and low-temperature resistance. Mine hose assembly supplier Application: There are many types of mining hoses, which refer to all rubber hoses suitable for mining in coal mines and mines. Common coal mine hoses include hydraulic support hoses, mining drainage hoses, mining spray pipes, mining exhaust hoses, coal mine hydraulic oil pipes, etc.