Motorcycle Assembly Line

Automotive Axle Assembly Equipment consists of automotive axle assembly line, differential assembly line, final drive/differential assembly line, wheel hub assembly line, wheel edge differential assembly line, run in tester, nut tightening machine, automatic shim selecting machine, start torque testing machine, etc.

A? Project: Led bulb assembly line machines B? Dimension: Model type: 12000 l×400w(belt)×750h(mm) C? Structure: Single way pvc belt conveyor, galvanized roller transfer, independent frequency control of motor speed. D? Description: Stable performance, safety and reliability, simple operation. E? Specification: 1. Motor : Adopt 750w motor, wps 60 type 1:6 0 of the speed reducer, the chinese famous brand sondao 1 hp's frequency multiplier, frequency conversion sleepless speed regulation, linear speed 2-6m/min can be adjusted. 2. Machine body & frame : Frame made by 40 x 40 square tube, stand by the same 40 x 40 square pipe production and become, below the belt by four points galvanized drum retainer and transfer; leg match galvanized adjustable foot cup; head plate with 1.2 mm cold plate bending rolling forming, body 2 meters one pieces. 3. Conveying belt: Using the netherlands imported high quality green light delivery special pvc belt, thickness of 2 mm, width of 400 mm, belt total length is 24000 mm, ring seamless pyro-condensation connection. 4. Independent Working station : Independent table, specifications for 800long×600wide×750mm high(surface treated with antistatics), bilateral arrangement, the 25x 25 rectangular steel tube welding and become, 30l angle retainer; bedplate using 15mm quality compression plate, fastening fuselage both sides arrangement. Surface stick green antistatic soft rubber, green t strip edge; fastening fuselage both sides arrangement.Total of 16pcs of working table .

Features: 1. Used to remove the PCB or tray from the wave soldering machine at an angle of 6-7�. 2. Transmission speed, transmission height and track angle can be adjusted. 3. A cooling fan can be installed to protect the PCB or components. 4. Special belt and track, stable transmission, stable and reliable work. specification: Size (length width height) 1000*600*750mm PCB width Max.350mm PCB orientation L-R(R-L option) transfer speed 0-2m/min engine Single phase 220V 25W power supply Single phase 220V 50Hz Conveyor height 700-800MM adjustable Belt material Anti-static belt Transport rail length 1000MM weight 50KG High Quality SMT Production Line Machine with CE SMT line(tHigh flexibility): Loadertprinter+conveyor+pick and place +conveyort+reflow oven+working table (size:12.2-2*1.65m) 1. workers:1-2(Operator1, AOl 1) 2. Actual Capacity:20000-22000pcs/hour(28000CPH FOR IPC9850) 3. Other information to check the catalogue The expansion of the solution: If it is necessary to increase production quantity, only need to increase the smt mounter, the other device does not need to increase, cost savings. 1) Suitable for all led lights: led tube, led bulb, led strip, led panel, led downlight.. 2) From full automatic to semi-automatic, high to meddle speed line! 3) High accuracy machine line! 4) One year warranty! 5) Engineer availble to install and training machine in oversea!

Features: 1. Used to remove the PCB or tray from the wave soldering machine at an angle of 6-7°. 2. Transmission speed, transmission height and track angle can be adjusted. 3. A cooling fan can be installed to protect the PCB or components. 4. Special belt and track, stable transmission, stable and reliable work. specification: Size (length Ã? width Ã? height) 1000*600*750mm PCB width Max.350mm PCB orientation L-R(R-L option) transfer speed 0-2m/min engine Single phase 220V 25W power supply Single phase 220V 50Hz Conveyor height 700-800MM adjustable Belt material Anti-static belt Transport rail length 1000MM weight 50KG High Quality SMT Production Line Machine with CE SMT line(tHigh flexibility): Loadertprinter+conveyor+pick and place +conveyort+reflow oven+working table (size:12.2-2*1.65m) 1. workers:1-2(Operator1, AOl 1) 2. Actual Capacity:20000-22000pcs/hour(28000CPH FOR IPC9850) 3. Other information to check the catalogue The expansion of the solution: If it is necessary to increase production quantity, only need to increase the smt mounter, the other device does not need to increase, cost savings. 1) Suitable for all led lights: led tube, led bulb, led strip, led panel, led downlight.. 2) From full automatic to semi-automatic, high to meddle speed line! 3) High accuracy machine line! 4) One year warranty! 5) Engineer availble to install and training machine in oversea!

Dimension : 12000L×1450W×730H(mm) Quality : One set Structure : Automatic chain conveying ,Tooling plate conveying Function and features:: This equipment is suitable for all kinds of LED street lamps and electronic electrical appliances manufacturer, specialized in water assembly, the power system using variable frequency speed control system, stable performance, safety and reliability, simple operation. Specification : 1. Driver device: Adopt 1.5 KW / 380 v motor, reducer adopts 100 # 1:6 0, speed 1-5 M/minutes adjustable, PLC control, head support using 40 x 40 x§2.0mm carbon steel flat pass welding and into production, head seal plate using §1.5mm A3 plate bending production. 2. Guide : Guide adopt 100 x 118 mm special aluminum guide rail, rail link adopt A3 plate production , plastic-sprayed surface treatment; 3. Transfer chain : Adopt Suzhou quality P = 38.1mm three times the speed chain, the whole line arrangement; 4. Frame or skeleton: Adopt 40x40x§2.0 mm carbon steel flat pass welding production, each support spacing is 2 meters. 5. Lighting system: Light pass support cold plate bending and become, specifications for 50×25ק1.0 mm, 40 x 40 x§1.5 mm carbon steel flat pass welding production , each 2 m one paragraph, in turn,arrangement , lighting using 40 w single belt cover fluorescent lamp , lined up on all fronts, the whole line about 16 sets of tubes. 6. Socket slot: Use 2000 x 50×25 galvanized wire slot, is located under the machine belt, points on both sides installation three, two square socket (every 1 m/workstation install one). 7. Line body gas path: All line body gas circuit using four points galvanized control, and in each station with a set of 4 points quick connector; 8. Wind batch chute: Each side fixtures are one propose to batch chute, adopt FD28 30 x28 aluminum , each station a rings. 9. Process card frame: In the fixtures are intermediate set two way process guidance card frame, the H type aluminum guide production, each station layout a piece of A4 transparent looking board hard rubber sleeve. 10. Station blocker: Using QX - type I stop device, each block device with a foot valve switch control. 11. Top body flat moving machine: On-line body ends, lifting SMC lifting cylinder device, conveyor belt use§5mm skid proof conveyor belt production, bilateral decorate, drive use Taiwan production miniature constant speed motor, motor power for 90 w 1:25, realize tooling plate cycle delivery, a total of four sets

Dimension : 12000L×1900W×730H(mm) Quality : One set Structure : Hand push no power roller production line Function and feature : This device is suitable for all kinds of LED street lights, tunnel lights electronic appliances, gas stove, range hood, bathroom and other manufacturers, dedicated to gas appliances, range hood, bathroom and other water assembly, stable, secure, reliable, easy to operate. Specification : 1. Body and frame : Frame and Tripod,Rod adopt 40X40 square tube made,Conveyor rollers using L = 750mmF38 galvanized drum wall thickness 1.0mm. Branch arranged at intervals of 100mm. Rack galvanized legs with adjustable foot cups.,and the machine body is two meters per section. 2. Hand tooling plate: Specifications for the 800×60×15mm, 15mm high-quality plywood made of high quality, high-quality anti-static soft surface leather paste, green T-tape sides edging; across the board with 30 total tooling plate 3. Stands lighting : H-lamp mounted in the rack, use 40×20 square tube production, the connection body of a lighthouse with 2000 ×50×25 spray duct connecting the power,per 2 meter, lighting choice of 40W single fluorescent tube bracket with cover , approximately every 1.3 meters to install a light tube, along the lines of bilateral arrangement 4. Middle Stands: In light shelves located along Stands, for supporting the use of angle, width 300mm, 15mm compression using plate, face stickers bright green fire board. 5. Process card: On both side of line arrange the process card,using the H-type aluminum rail production, every section with a A4 plastic paper. 6. Trachea : At the top of the lighthouse located along each side of the trachea; (of two), using 4 galvanized pipe, every meter an opening. (Quick Connector customer self-) 8. Ball table : Excessive tables at both ends using universal 1.2mm cold plate bending shape, specifications for 1900 X850×730 (mm); surface evenly install universal bovine. 9. Working power: Using 2000 × 50 × 25 galvanized trough, located in the fuselage on both sides of the drum, (of two) on each side of the way, the installation thirty-two socket (per meter / station to install a) bilateral use.

High quality, favorable price, satisfactory service for electronic industry robot arm, part of which is flight photography technology, eight-head flight photography identification, marble platform transmission system, automatic adjustment of THK ball grinding screw

Supplier: Medical kit, cleaning solutions, surgical mask, military connectors ,sullins connector, adam condom, led ip67 lighting, omron cables harness, panasonic cable harness, e scooter
Services: Trade and importing

Supplier: Power supply cord, computer cable assembly, network cable assembly, antenna, car accessory, motorcycle accessory, auto parts, parts for car and automobiles and motorcycles