Dimension : 12000L×1450W×730H(mm)
Quality : One set
Structure : Automatic chain conveying ,Tooling plate conveying
Function and features:: This equipment is suitable for all kinds of LED street lamps and electronic
electrical appliances manufacturer, specialized in water assembly, the
power system using variable frequency speed control system, stable
performance, safety and reliability, simple operation.
Specification :
1. Driver device: Adopt 1.5 KW / 380 v motor, reducer
adopts 100 # 1:6 0, speed 1-5 M/minutes adjustable, PLC
control, head support using 40 x 40 x§2.0mm carbon steel
flat pass welding and into production, head seal plate using
§1.5mm A3 plate bending production.
2. Guide : Guide adopt 100 x 118 mm special aluminum guide rail, rail
link adopt A3 plate production , plastic-sprayed surface
treatment;
3. Transfer chain : Adopt Suzhou quality P = 38.1mm three times the speed chain, the whole
line arrangement;
4. Frame or skeleton: Adopt 40x40x§2.0 mm carbon steel flat pass welding
production, each support spacing is 2 meters.
5. Lighting system: Light pass support cold plate bending and become,
specifications for 50×25ק1.0 mm, 40 x 40 x§1.5 mm carbon steel
flat pass welding production , each 2 m one paragraph, in turn,arrangement
, lighting using 40 w single belt cover fluorescent lamp , lined up on all fronts,
the whole line about 16 sets of tubes.
6. Socket slot: Use 2000 x 50×25 galvanized wire slot, is located under the machine belt,
points on both sides installation three, two square socket (every 1 m/workstation
install one).
7. Line body gas
path: All line body gas circuit using four points galvanized control, and in each station
with a set of 4 points quick connector;
8. Wind batch chute: Each side fixtures are one propose to batch chute, adopt FD28 30 x28 aluminum ,
each station a rings.
9. Process card
frame: In the fixtures are intermediate set two way process guidance card frame, the H
type aluminum guide production, each station layout a piece of A4 transparent
looking board hard rubber sleeve.
10. Station blocker: Using QX - type I stop device, each block device with a foot valve switch control.
11. Top body flat
moving
machine: On-line body ends, lifting SMC lifting cylinder device, conveyor belt use§5mm skid
proof conveyor belt production, bilateral decorate, drive use Taiwan production
miniature constant speed motor, motor power for 90 w 1:25, realize tooling plate
cycle delivery, a total of four sets
Dimension : 12000L×1900W×730H(mm) Quality : One set Structure : Hand push no power roller production line Function and feature : This device is suitable for all kinds of LED street lights, tunnel lights electronic appliances, gas stove, range hood, bathroom and other manufacturers, dedicated to gas appliances, range hood, bathroom and other water assembly, stable, secure, reliable, easy to operate. Specification : 1. Body and frame : Frame and Tripod,Rod adopt 40X40 square tube made,Conveyor rollers using L = 750mmF38 galvanized drum wall thickness 1.0mm. Branch arranged at intervals of 100mm. Rack galvanized legs with adjustable foot cups.,and the machine body is two meters per section. 2. Hand tooling plate: Specifications for the 800×60×15mm, 15mm high-quality plywood made of high quality, high-quality anti-static soft surface leather paste, green T-tape sides edging; across the board with 30 total tooling plate 3. Stands lighting : H-lamp mounted in the rack, use 40×20 square tube production, the connection body of a lighthouse with 2000 ×50×25 spray duct connecting the power,per 2 meter, lighting choice of 40W single fluorescent tube bracket with cover , approximately every 1.3 meters to install a light tube, along the lines of bilateral arrangement 4. Middle Stands: In light shelves located along Stands, for supporting the use of angle, width 300mm, 15mm compression using plate, face stickers bright green fire board. 5. Process card: On both side of line arrange the process card,using the H-type aluminum rail production, every section with a A4 plastic paper. 6. Trachea : At the top of the lighthouse located along each side of the trachea; (of two), using 4 galvanized pipe, every meter an opening. (Quick Connector customer self-) 8. Ball table : Excessive tables at both ends using universal 1.2mm cold plate bending shape, specifications for 1900 X850×730 (mm); surface evenly install universal bovine. 9. Working power: Using 2000 × 50 × 25 galvanized trough, located in the fuselage on both sides of the drum, (of two) on each side of the way, the installation thirty-two socket (per meter / station to install a) bilateral use.
Power (W): 30/50; Power factor: 0.9; CCT (K): 4000/5000; Luminous efficacy (lm/W): 125/130/150; CRI (Ra): 70/80; Life span (hrs): 50,000; IP66; Options: - Voltage: 120/ 220�·240/ 100�·277V - Light distribution: Type I/ II /III / IV - 2-step dimming; ON/OFF timer. - Surge protection: 6KV/10KV Flicker-free; CE, KC certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Power (W): 80/100/120/150/200; Power factor: 0.9/0.95; CCT (K): 4000/5000; Luminous efficacy (lm/W): 130; CRI (Ra): 70/80; Life span (hrs): 50,000; IP66 Options: - Voltage: 120/ 220-240/ 100 277V - Light distribution: Type I/ II /III / IV - Connect to lighting controller with standard â??Isolated 1-5V or 1-10V or 10VPWM or timer dimming - Surge protection: 10KV/20KV - Tool less maintenance Flicker-free; CE, KC certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Power (W): 80/100/120/150/180/200; Power factor: 0.95; CCT (K): 4000/5000; Luminous efficacy (lm/W): 130/150; CRI (Ra): 70/80 Life span (hrs): 50,000; IP66 Options: - Voltage: 120/ 220�·240/ 100�·277V - Light distribution: Type I/ II /III / IV - Connect to lighting controller with standard â??Isolated 1-5V or 1-10V or 10VPWM or timer dimming - Surge protection: 10KV/20KV Flicker-free; CE, KC certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Power (W): 30/40/60/70/100/120/150/200; Power factor: 0.95; CCT (K): 4000/5000; Luminous efficacy (lm/W): 110/115/125/130/135; CRI (Ra): 70/80; Life span (hrs): 30,000/50,000; IP66; Options: - Voltage: 120/ 220�·240/ 100�·277V - Light distribution: Type I/ II /III / IV - Connect to lighting controller with standard â??Isolated 1-5V or 1-10V or 10VPWM or 3-Timer-Modes Dimmableâ?? connection. - Surge protection: 10KV/20KV Flicker-free; CE, KC certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
LED light.
For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. • 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb • Wattage: 10W • Blue UV light • Lumen: 900-1000lm • Color Temperature (CCT): 6500K • Input Voltage: AC 90-130V & 220v-240V • With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.
Powerï¼? 900W LED Qtyï¼? 72pcs 5W LED & 6pcs 90W COB Voltage ï¼? AC85-265V Work frequencyï¼? 50/60Hz Lumen ï¼? >15400Lm Dimmensionï¼? 660X385X118mm N.W ï¼? 11.4kg Coverage ï¼? 1.0Ã?1.2 m Warranty ï¼? 50000 hours
Power 900W LED Qty 72pcs 5W LED & 6pcs 90W COB Voltage AC85-265V Work frequency 50/60Hz Lumen >15400Lm Dimmension 660X385X118mm N.W 11.4kg Coverage 1.0 1.2 m Warranty 50000 hours
