When it comes to choosing dependable Nitriding Steel Exporter and Supplier in Mumbai, we are counted by many manufacturers. This is because we offer high quality Nitriding Steel for use as raw material. Nitriding Steels are special grades low alloy surface hardened steels containing Carbon 0.3 to 0.45% and Cr-Mo as alloying elements with or without Al. These alloys when heated at about 500-525o C, in contact with cracked ammonia and nascent nitrogen diffuse into surface and form complex alloy nitrides imparting very high hardness resulting in high wear resistance and corrosion resistance besides anti spalling properties. Nitriding Steel containing Al develops hardness up to 1100 HV.
Used To Make
Injection Molding Equipment
Hydraulic Cylinders
Gears and Pinions
Die Inserts
Valve and Gate Parts
Cams
Piston Pins
Technical Specifications
Grade % C Mn Si Ni Cr Mo S P AI
En-41B Min 0.35 Max 0.1 Max 1.4 0.1 Max Max 0.9
Supplier: Die & tool steel, cold work steel, hot work steel, plastic mould steel, carbon steel, chrome moly steel, bearing steel, nitriding steel, stainless steel, case hardened steel, steel products, alloy steel, en series, die steel, tool steel, p20, c45 plates
Maraging (Vascomax) specification abstracts Maraging 250 (AMS 6512/MIL-S-46850) Maraging 300 (AMS 6514/MIL-S-46850) Maraging 350 (MIL-S-46850) Maraging ( Vascomax) in Aerospace Maraging (Vascomax) is stronger than most standard steel yet still malleable. It can be flow formed over mandrels as a thinner rocket or missile skin at any length. Thinner means more room for payloads and fuel. Maraging for the Military Our armed forces rely on weapons that perform reliably over long periods in harsh environments. Maraging (Vascomax) retains its strength and has minimum distortion and deterioration, even after heat and pressure. It is a key material in the manufacture of all types of firing pins and breech blocks. Maraging in Transportation Maragings superior strength and ductility make it the preferred material for critical parts such as landing gear in all types of civilian and military aircraft. Temperature changes and sudden or constant applications of pressure, impact or torque, have little effect on parts made from Maraging. It is the ideal material for high performance internal engine components such as shafts, gears and fasteners. Maraging in Manufacturing Maragings ability to expand without cracking make it the material of choice for drill chucks. Its uniform machinability and durability make it ideal for producing gears in sophisticated robotic arms in assembly lines, and its high strength and wear resistance make it perfect for grippers in automation lines. Other Maraging (Vascomax) benefits for the manufacturing arena include excellent polishability and weldability with pre- or post heating. Maraging in Tool & Die Making Maraging (Vascomax) has a significant cost advantage over other alloys. Uniform predictable shrinkage during heat treatment means Maraging does not require excessive reworking. It is easily machined. Its hardness and strength allow it to withstand the repeated pressures of compression molding for longer tool life with a very good surface finish.
1.2601 tool steel with high wear resistance against abrasive and adhesive, good toughness, edge-holding ability and compression strength, low distortion, non-deforming, full hardness with air hardening in any dimension, suitable for bath nitriding. 1.2601 tool steel applications mainly for making high performance blanking, punching, stamping and cutting tools and dies up to 6mm sheet thickness, thread rollings, chasers and dies, cold forming and bending tools, precision blanking dies, longitudinal and circular shear blades for plastic, paper and metal, milling cutters, reamers, broaches, hobbing tools, tools for drawing, deep drawing and cold extrusion, woodworking tools, pressing tools for the sinters, ceramics and pharmaceutical industries, cold piercers, measuring tools, rolling cutters and shaping wheels, cold pilger mandrels, flanging, straightening and beading rolls, trimming and splitting dies, tools for the cold manufacture of screws, nuts and rivets, plastic moulds.
P20 tool steel differs from area to area in the different countries.Europeans generally use the DIN spec-DIN EN ISO 4957 standard materials (1.2311 and 1.2312), while in Japan steel industry standard, PX5 is the new standard P20. And the Americas Countries, Grade steel P20 is the most and wide used steel grade material. In China, 3CrM2Mo is the P20 steel grade equivalent, which is in the standard GB/T 1299 tool steel specification. AISI P20 tool steels are nitrided or carburized. These P20 mold steel materials steels are capable of being machined into complex and large dies and molds. Material P20 steel plate and round bars are mostly used in the carburized condition. The presence of chromium and nickel enhances the toughness and hardness of mold steel P20 grade material. 1. Supply Range of P20 Steel Round Bar: diameter 200mm 1000mm Steel Plate: thickness 16-100mm x width 200-2000mm Surface Finish: Black, Rough Machined, Turned or as per given requirements.
D2/1.2379 cold work tool steel is chrome-molybdenum-vanadium steel with big hardenability for hardening in oil and in air, especially high resistance to the wear (higher than by 1.2080), good cutting power, very good firmness in the pressure, lower toughness (but higher than by 1.2080). This steel shows good dimensional stability at the heat treatment, suitable for hardening to the secondary hardness (the possibility of nitriding). Further the steel is very difficult to sharpen, it works at the heat with difficulties and has a rather difficult workability in the annealed state. D2/1.2379 is suitable for making tools for cold cutting, i.e. all kinds of tools with the long durability for cutting on presses and punching of materials of smaller thicknesses and materials of high hardness (especially difficult-shape tools for cutting, e.g. transformer metal sheets and metal sheets from stainless steels), knives for plate shears for the sheet and strip steel up to thickness of 10 mm of sheared material, knives for wire cutting etc. Tools for mechanical working such as e.g. smaller girders and tools for drawing, all kinds of tools for transformation and punching of materials. Further the steel is suitable for simple and symmetric tools for pressing and pushing, tools for thread rolling, plain and profile rolls, swages and also for cold work. Cutting tools such as broaching thorns, profile knives and difficult-shape milling machines for lower cutting speeds and for treatment of nonmetallic abrasive materials. Further the steel is applied in the production of highly stressed molds and their components for working of plastic and powder substances, glass, porcelain and ceramic materials. By tools for crushing and grinding it is used for hammers of crushers and jaws for mild grinding and crushing.
Features 1.Good machineability alloy tool steel. 2.Excellent polished finish for large section. 3.Supplied in the hardened and tempered condition ready for machining. 4.Can be case hardened or nitrided. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Features 1.Good machineability alloy tool steel. 2.Excellent polished finish for large section. 3.Supplied in the hardened and tempered condition ready for machining. 4.Can be case hardened or nitrided. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Features 1.Chromium molybdenum alloy steel. 2. High strength and toughness. 3.Good stability of hardenability and anti-overheating. 4.Good high tensile strength with shock resistance. Applications 1.Heavy machinery and high-load of shaft. 2. Rotor shaft and blades. 3.Special performance requirements of the vital parts after nitriding treatment. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
1, size of hot rolled 4340 12mm steel rod price Round bar diameter(mm) length (mm) 20~800 3000~9000 Plate Thickness(mm) width (mm) length (mm) Max:800 max:2200 max:9000 The specification can be customized. 2chemical compositons of hot rolled 4340 12mm steel rod price Grade C si mn p s cr mo ni 0.38-0.43 0.15-0.35 0.60-0.80 â?¤0.035 â?¤0.040 0.70-0.90 0.20-0.30 1.65-2.00 3, features of hot rolled 4340 12mm steel rod price 1, chromium molybdenum alloy steel; 2, high strength and toughness; 3, good stability of hardenability and anti-overheating; 4, good high tensile strength with shock resistance. 4, typical applications of hot rolled 4340 12mm steel rod price 1, heavy machinery and high-load of shaft; 2, rotor shaft and blades; 3, special performance requirements of the vital parts after nitriding treatment. -
