We offer Bearing Steel that has right amount of carbon (0.55 to 1.10 percent), manganese (0.10 to 1.15 percent), silicon (0.15 to 2.0 percent), phosphorus and sulfur up to a maximum of 0.03 percent and chromium (0.5 to 2.0 percent). The remaining percent is that of iron. Chemical properties determine the anti-corrosive properties of the Bearing Steel. The chemical composition of the steel also dictates the mechanical and physical properties of strength and hardness, toughness and brittleness and ductility and malleability that can be found in our Bearing Steel.
Details
Bearing steel has enormous hardness because the manufacturing process of Bearing Steel requires melting and degassing of the metal followed by certain metallurgical processes. It is then tempered and quenched. Bearing steel has a bending strength of 2400 MPa (Pascal Unit) and can withstand high stress and centrifugal forces. But it has a low corrosion resistance. Bearings materials can either be through-hardened or case-hardened and may also require vacuum-processing to ensure purity. A minimum expected hardness for bearing components is 58 Rc (measurement of hardness) but it has generally higher hardness levels.
Technical Specifications
Grade % C Mn Si Ni Cr Mo S P
SAE 52100 Min 0.98 0.25 0.15 - 1.30 - Max Max
EN31 Max 1.10 0.45 1.60 - 1.60 - 0.015 0.02
We are pionners in making available Chrome Molybdenum steel (often referred to in the industry as Chrome Moly). The molybdenum provides increased strength and higher working temperatures whilst the chromium facilitates excellent corrosion resistance and oxidation. With such high temperature, tensile strength and anti-corrosive properties, our Chrome Moly Steel is highly effective in salt water applications and widely demanded. We offer Chrome Moly Steel that is used for a wide variety of applications particularly in the oil and gas industry, the nuclear industry and fossil fuel power stations.
Used To Make
Cutters
Twist drills
Taps
Turning Tools
Drawing Dies
Milling Cutters
Broaches
Technical Specifications
Grade % C Mn Si Ni Cr Mo S P
En-24 Min 0.35 0.45 0.1 1.3 0.9 0.2 Max Max
Max 0.45 0.7 0.35 1.8 1.4 0.35 0.015 0.02
En-19 Min 0.35 0.5 0.1 0.9 0.2 Max Max
Max 0.45 0.8 0.35 1.2 0.35 0.015 0.02
SAE 4340 Min 0.38 0.6 0.15 1.65 0.70 0.20 Max Max
Max 0.43 0.8 0.3 2.00 0.90 0.30 0.015 0.02
SAE 4140 Min 0.38 0.75 0.15 0.80 0.15 Max Max
Max 0.43 1 0.3 1.10 0.25 0.015 0.02
We are a well-known Importer & Supplier of Plastic Mould Steel. We procure Plastic Mould Steel from the certified vendors who use special melting and refining practices to produce a uniform product with exceptional cleanliness. Plastic Mould Steel, supplied by us, is tested on rigorous tool steel standards to ensure uniformity of structure and freedom from defects. The above characteristics allow the polishing of Plastic Mould Steel to an extremely high finish required for plastic molding. We supply Plastic Mould Steel prehardened to 262/321 BHN. The balanced alloy composition of Plastic Mould Steel ensures a uniform cross-sectional hardness.
Used To Make : Moulds for Plastic injection Moulding and Die casting
Technical Specifications
Grade % C Mn Si Ni Cr Mo S P
P20 Min 0.28 0.60 0.20 1.40 0.30 Max Max
Max 0.40 1.00 0.80 2.00 0.55 0.015 0.02
DIN 1.2311 Min 0.35 1.40 0.30 1.8 0.2 Max Max
Max 0.45 1.60 0.50 2 0.3 0.015 0.02
DIN 1.2378 Min 0.35 1.40 0.32 0.95 1.80 0.20 Max Max
Max 0.45 1.60 0.50 1.10 2.00 0.30 0.015 0.020
Stainless Steels are high alloy steels that can be classified as magnetic (ferritic and martensitic) and non-magnetic (austenitic) types. Your search for top quality Stainless Steel ends with us. We offer Stainless Steel having superior corrosion resistance, heat resistance as well as good strength and elongation. The different grades of Stainless Steel offered by us are used in manufacturing various industrial, commercial and household products.
Ideal For
li>Cookware
Cutlery
Surgical Instruments
Architecture
Chemical industry
Mechanical Engineering industry
Foodstuffs industry
Energy industry
Medicine industry
Transport industry
Engineering industry
Offshore industry
Technical Specifications
Grade % C Mn Si NI Cr Mo S P
AISI 304 Min 0.08 2.00 0.75 8.00 18.00 0.03 0.04
Max Max Max Max 11.00 20.00 Max Max
AISI 304L Min 0.04 2.00 0.75 8.00 18.00 0.03 0.04
Max Max Max Max 13.00 20.00 Max Max
AISI 316 Min 0.08 2.00 0.75 11.00 16.00 2.00 0.03 0.04
Max Max Max Max 14.00 18.00 3.00 Max Max
AISI 316L Min 0.04 2.00 0.75 10.00 16.00 2.00 0.03 0.04
Max Max Max Max 15.00 18.00 3.00 Max Max
AISI 321 Min 0.08 2.00 0.75 9.00 17.00 0.03 0.04
Max Max Max Max 13.00 20.00 Max Max
AISI 410 Min 0.15 1.00 1.00 11.50 0.03 0.04
Max Max Max Max 13.50 Max Max
AISI 420 Min over 0.15 1.00 1.00 12.00 0.03 0.04
Max Max Max Max 14.00 Max Max
As a Hot Rolled Steel Exporter and Supplier from Mumbai, we bring forth imported products from reputed companies in China. We supply Hot Work Steels that are used in hot forming of metals at high temperatures. Hot Rolled Steel that we offer possesses good strength at elevated temperatures and also resistance to fluctuating thermic loads occurring where the tool surfaces come into contact with materials to be processed. We hold specialization in offering our clients an expansive range of Hot Work Steel, which is acknowledged for its load bearing ability and durability.
Suited For
Pressure Die Casting
Aluminium & Copper Extrusion
Die Forging
Forging Die Blocks
Glass Processing
Mandrels & Pilger dies for Tube and Pipe manufacturing
Technical Specifications
Grade % C Mn Si Cr Mo V S P
AISI H11 Min 0.30 0.20 0.80 4.75 1.25 0.30 Max Max
Max 0.40 0.50 1.20 5.50 1.75 0.50 0.015 0.020
AISI H13 Min 0.30 0.20 0.80 4.75 1.25 0.80 Max Max
Max 0.40 0.50 1.20 5.50 1.75 1.20 0.015 0.020
We are widely acclaimed for making available high grades of Carbon Steel, which is developed by using premium grade materials. Known for its durability, Carbon Steel is used in the production of an assortment of products. We offer Carbon Steel in various shapes such as round, hex, square, flat, plate, coil and wire sections in standard as well as off sizes. As we supply a wide variety of Carbon Steel it is easier for our clients to select the most efficient and feasible Carbon Steel from the array. Carbon Steel, offered by us, is used in the manufacturing various products. The premium quality of Carbon Steel ensures that the resultant products are too of highest grade.
Chemical Composition (%)
Steel Grade (Code Number) C Mn Si S Max P Max
Ck 45 0.42/0.50 0.50/0.80 0.15/0.35 0.035 0.035
Ck 55 0.52/0.60 0.60/0.90 0.15/0.35 0.035 0.035
Ck 60 0.57/0.65 0.60/0.90 0.15/0.35 0.035 0.035
SAE1020 0.18/0.23 0.30/0.60 0.10/0.30 0.050 0.040
SAE1030 0.28/0.34 0.60/0.90 0.10/0.30 0.050 0.040
SAE1035 0.32/0.38 0.60/0.90 0.10/0.30 0.050 0.040
SAE1040 0.37/0.44 0.60/0.90 0.10/0.30 0.050 0.040
SAE1045 0.40/0.50 0.60/0.90 0.10/0.30 0.050 0.040
En-8D 0.40/0.45 0.70/0.90 0.05/0.35 0.060 0.060
En-9 0.50/0.60 0.50/0.80 0.05/0.35 0.060 0.060
When it comes to choosing dependable Nitriding Steel Exporter and Supplier in Mumbai, we are counted by many manufacturers. This is because we offer high quality Nitriding Steel for use as raw material. Nitriding Steels are special grades low alloy surface hardened steels containing Carbon 0.3 to 0.45% and Cr-Mo as alloying elements with or without Al. These alloys when heated at about 500-525o C, in contact with cracked ammonia and nascent nitrogen diffuse into surface and form complex alloy nitrides imparting very high hardness resulting in high wear resistance and corrosion resistance besides anti spalling properties. Nitriding Steel containing Al develops hardness up to 1100 HV.
Used To Make
Injection Molding Equipment
Hydraulic Cylinders
Gears and Pinions
Die Inserts
Valve and Gate Parts
Cams
Piston Pins
Technical Specifications
Grade % C Mn Si Ni Cr Mo S P AI
En-41B Min 0.35 Max 0.1 Max 1.4 0.1 Max Max 0.9
Alloy Steel
Case Hardened Steel is usually formed by diffusing carbon and/or nitrogen into the outer layer of the steel at high temperature. The carbon combines with the steel to make it nearly glass-like in its hardness. The core of the Case Hardened Steel metal stays soft. This gives you a piece of metal that you cannot cut with a saw, but which also does not shatter. Case Hardened Steel is offered by us in various forms and is assured to be of superior quality. Imported from vendors in China, the Case Hardened Steel can be availed from us at very competitive rates.
Used To Make
DTH hammers
Automobile pistons
Couplings
Castings
Gears
Worm Shafts
Button Bits
Gudgeon pins
Sprocket
Front Axle wheel
Gear shaft
Crown wheels
Swing lever
Pressure rings
Technical Specifications
Grade % C Mn Si Ni Cr Mo S AI
En-36C Min 0.12 0.30 0.10 3.00 0.60 0.10 Max
Max 0.18 0.06 0.35 3.75 1.10 0.25 0.02
17 CrNiM06 Min 0.14 0.40 0.15 1.40 1.50 0.25 Max
Max 0.19 0.60 0.40 1.70 1.80 0.35 0.02
SAE8620 Min 0.18 0.70 0.15 0.40 0.40 0.15 Max
Max 0.23 0.90 0.35 0.70 0.60 0.25 0.02
20MnCr5 Min 0.17 1.10 0.15 Max
Max 0.22 1.40 0.40 0.02
DIN 20 Cr Ni 4 Min 0.19 0.95 0.20 0.90 1.05 Max 0.20
Max 0.21 1.05 0.30 1.20 1.15 0.02 0.25
EN 353 Min 0.20 0.50 0.35 1.00 0.75 0.08 Max
Max Max 1.00 Max 1.50 1.25 0.15 0.02
EN- 354 Min Max 0.50 Max 1.50 0.75 0.10 Max
Max 0.20 1.00 0.35 2.00 1.25 0.20 0.02
Various properties of Cold Work Steels make them perfect for manufacturing a variety of products such as cutting and pressing tools, cavity moulds, knives, hobbing and drawing tools, cavity-sinking punches, flat and circular thread-rolling dies, and much more. Having all such properties like high surface hardness, good toughness and compressive strength, high wear resistance the Cold Work Steel that we offer is highly demanded. Tool & Die Steel is one of major Strengths, We are a Leading Importer - Exporter - Stockist of these Steel Products. WE offer Wide range of Sizes for this Steel.
Suited For
Cutting dies
Heavy duty cutting and Punching tools
Milling cutters
Reamers
Calipers
Tapping dies
Measuring tools
Technical Specifications
Grade % C Mn Si Cr Mo V W S P Co
AISI 01 Min 0.85 1.00 0.20 0.40 Max 0.40 Max Max -
Max 0.95 1.30 0.40 0.60 - 0.20 0.60 0.015 0.020 -
AISI D2 (DIN 1.2379) Min 1.40 0.30 0.30 11.00 0.70 0.90 - Max Max Max
Max 1.60 0.50 0.50 13.00 1.20 1.10 - 0.015 0.020 0.6
AISI D3 (DIN 1.2080) Min 2.00 0.24 0.25 11.00 - Max Max Max Max -
Max 2.35 0.45 0.45 13.00 - 0.80 0.75 0.015 0.020 -
Goldsmith Tools
