The engraving styli for HELL/MDC/OHIO machines are not only produced on sophisticated polishing benches, but during polishing, monitored by interference microscopy in order to secure the surface finish. The angles of each individual stylus are measured with an in-house developed 3D laser measuring device. Strict quality control ensures that the products are manufactured to meet or exceed the required specifications.
1. One way/can be resharpable
2. High speed(without wing)/low speed(with wing)
3. Stylus angle: 90-140 degree
4. Available brand: HELL, MDC, OHIO, etc.
5. PISA Stylus for all models
6. Provide re-sharpening service(repair)
Machinery & Industrial Supplies >> General Parts >> Other General Parts
Application:
The stylus can be used for
Hell engraving machine kinds like K303, K304, K405, K5, K50, K500.
Daetwyler engraving machine kinds like 11, 12, 21c, 21ck etc and new generation 1315, 2215, 3625
Ohio engraving machine kinds like 720, 820.
1. Working principle for engraving styli
Engraving styli are used for incising the precise apertures on copperplate, the operating frequency is 8000 Hz (ie, up to 8000 apertures per second), various angles of the diamonds are available for diverse using demand.
Our professional technicians and quality manage system obtains the minimum tolerance and high precision.
2. Using caution and cleaning for engraving styli
As we all know, diamond possesses the best hardness but poor roughness, so please do not touch the tip with your finger or textile fabrics, for even a slight touch would damage the tip and lead to an inefficient stylus. The pyramid would explicate all.
A stone made pyramid would keep a certain structure since one above another, the above press won't destroy this structure, however, crosswise, a comparatively little force will ruin the whole structure.
When engrave with an engraving stylus, the strength is mainly on its tip (just like the tip of a pyramid),so it is affordable. However, you touch the tip with your finger, it is more or less like uncontrollable force to the unstable pyramid, then lead to a partial tip damage.Cleaning with compress container would lead to same aftermath, if a hard grit or even dust drops on stylus's tip with a high speed, the stylus will get damaged.Furthermore, compress air would probably blow the copper scrap into the gravure system, which also influences a stylus' life.
3. How to clean the diamond of the stylus
Usually, we are not allowed to touch the diamond of the stylus, instead, we use HELL set-up system to set up or remove the stylus, in this way, you may avoid to touch the diamond.You're allowed to clean the diamond after you make sure it necessary with microscope examination. By the way, the vacuum drawer of the HELL machine is available for copper pile.
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Supplier: Licensed trade company with products such as agricultural products (fresh and frozen), safety equipment (ppe), spare parts, building materials, electronics, heavy equipment, manufacturing equipment & materials, cosmetics.
Services: Distributor
1 - Product Description For CNC Laser Co2 Engraving Machine 1 - Fixed cabinet frame for rigidity. 2 - Materials can extend through the front and rear doors to allow for a larger work product. 3 - High precision equilibrium linear guide ensures the precise processing effect; 4 - Adopt the super fine cutting technology, which has features of extensive material processing, smooth cutting edge and burr - free; 5 - Laminated Safety Glass; 6 - Original Singapore imported lens with molybdenum base, making the equipment produce smaller facula and stronger cutting force; 7 - Exhausting, absorbing and assistant blowing systems solve the problem that troubles the laser equipments manufacturing industry for years; 8 - The laser cutter is equipped with aluminum strip shape platform; 9 - This machine uses USB port to transmit data, it is equipped with large internal memory capacity; 10 - Adopts high quality RECI /Yongli/SLW CO2 glass laser tube Product Description For CNC Laser Co2 Engraving Machine 1 - Fixed cabinet frame for rigidity. 2 - Materials can extend through the front and rear doors to allow for a larger work product. 3 - High precision equilibrium linear guide ensures the precise processing effect; 4 - Adopt the super fine cutting technology, which has features of extensive material processing, smooth cutting edge and burr - free; 5 - Laminated Safety Glass; 6 - Original Singapore imported lens with molybdenum base, making the equipment produce smaller facula and stronger cutting force; 7 - Exhausting, absorbing and assistant blowing systems solve the problem that troubles the laser equipments manufacturing industry for years; 8 - The laser cutter is equipped with aluminum strip shape platform; 9 - This machine uses USB port to transmit data, it is equipped with large internal memory capacity; 10 - Adopts high quality RECI /Yongli/SLW CO2 glass laser tube
CO2 laser cutting engraving machine is a CNC laser machine that uses CO2 laser to engrave and cut wood, MDF, plywood, chipboard, dieboard, cardborad, acrylic, fabric, jeans, plastic, leather, paper, ABS, EPM, PE, PES, PUR, PVB, PVC, PUR, , PTFE and thin metals. Controller Ruida RDC6445G Software Interface Ruida Rdworks v8 or LightBurn 2021 Software Format Support CorelDraw, Photoshop, AutoCAD, etc Graphic Format Support AI, PLT, BMP, DXF, DST, T100, etc
HDD-880 12.5 Full HD 1080P Display Capacitive Touch Screen POS System Machine with Optional MSR for Contactless Payment. Model Number : HDD-880 Samples: HDD-880 $235.00/Piece | 1 Piece (Min. Order) | Buy Samples Lead Time: Quantity(Pieces) 1 - 10 11 - 100 >100 Est. Time(days) 7 20 To be negotiated Customization: Customized logo(Min. Order: 100 Pieces) Customized packaging(Min. Order: 200 Pieces) Graphic customization(Min. Order: 100 Pieces)
Engraving machine Model:hs-t12090 Item numberú¦hs-z12090 Processing area:120000mm Components: Driver type: triphase step motor; Computer adoption: lcd sreen, dsp intelligent control system; available for direct output of original pictures from usb port, can work without computer; Laser tube type: 80w co2 sealed glass£» Platform: knives stripe type platform Guide rail: hwin linear guide rail and integrated frame-structure. Lens: original singapore imported laser lens; Belts: original italy imported transmitting belts; Cooling system: industrial cycle water cooler with water protection system; Free accessories:one exhausting blower and one compressed magnetic pump. Technical lndex£º Working mode: cutting and engraving Processing area£º1200¡á900mm Max. Cutting speed£º36000mm/min Max. Engraving speed£º64000mm/min Laser power£º80w Resolution ratio: 0.0064mm Minimum shaping character: chinese character: 2¡á2mm, letter: 1¡á1mm Location precision£º
Laser cutting (84561000)
Specifications: Mini desktop laser engraving machine is newly developed craft engraving machine.It is of high speed and accuracy, stable performance, and can be placed conveniently on the desk.Smoke purifier can be specially installed. 1.It is applied to small craft processing and a variety of engraving graphics and text on double-color board, wood, bamboo, and acrylic, cloth, leather and other nonmetal material. 2.It can carve the names, models, logos, design, date on the electronic components. 3.It can do cutting, and max cutting thickness of acrylic is 10 mm. 4.It can engrave all kinds of seal, such as on the material of horn, wood, red plastic, acrylic, ink pad, and so on. Parameters: 1engraving area500mmx300mm 2laser power 40w/ 60w 3laser type Co2 sealed glass 4max engraving speed1200mm/s 5max cutting speed500mm/s 6cutting thickness
Applicable material: leather, wool fabric, paper, plastic, cloth, pvc, Organic glass, rubber, wooden product, bamboo product, crystal jade, etc. Pplicable industry: this model is suitable for garment, shoes, leather, Fabric toy, computer embroidery, advertising, handcraft, packaging print, model, etc. Dimension :1450*1100*1100mm, weight:about 195kg, processing area, 900*600mm
