Specify the product as moisture-proofing membrane for building foundations, industrial flooring applications and roofing general insulation.
PROPERTIES
Gloss level : Matt (ISO 2813-78)
Solids : 25% (+/- 2 %)
Viscosity : 22000 cps @25ï?°C Brookfield 4/4)
Theoretical Coverage: 1 â?? 1, 5 m2/lit (@ 40ï?Â)
US$35.00 - US$120.00
Box | 500 Box/Boxes (Min. Order)
Payments:This supplier also supports L/C,T/T,Western Union payments
Quick Details
Place of Origin:
GBA-Alderney
Usage:
Building Coating, Wall Coating
State:
Emulsion, Emulsion
Model Number:
Universal Stainer
Main Raw Material:
Acrylic
Application Method:
Brush
Brand Name:
Universal Stainer
Packaging & Delivery
Port
Jebel Ali
Lead Time :
As per your requirements
Features Accurate composition
Packing 50ml, 100ml, 110grams
Category Universal Stainers.
NUTEX is a single pack co-polymer emulsion based; high build intermediate spray textured coating .contains quartz fine aggregates.
PROPERTIES
Colour : White
Finish : Matt-medium textured
Solids: 70%
Specific gravity: 1.60 +/- 0.03
Theoretical Coverage 1 â??2 m2/ltr
DRYING TIME â?? AT 25 �°
To handle: 2 hours
To Recoat: overnight
Number of coats: 1
Tollens Matt Emulsion is highly washable water borne product based on special blend of acrylic emulsion, which is giving an excellent coverage, weather resistive, fast drying, low VOC, and while application it comes out smooth velvet finish.
PROPERTIES
Colour : Full range- as per shade card
Finish: Matt
Solids (volume) : 36% �± 2%
Specific gravity: 1.45 �± 0.03
Theoretical Coverage 6.5-7.5m2/ltr @ 50uDFT
DRYING TIME :â?? AT 25 �°
To handle: �½ hour
To Recoat: 2 hours
Vehicle type: acrylic emulsion
Shipping:
Support Sea freight
Payments:This supplier also supports L/C payments.
Quick Details
CAS No.:
Acrylic Emulsion
EINECS No.:
Acrylic Emulsion
Main Raw Material:
emlusion
Application Method:
Brush
Brand Name:
REGENT HIGH GLOSS EMULSION
MF:
Acrylic Emulsion
Place of Origin:
GBA-Alderney
Usage:
used for water-based ink and pverprint varnish production
State:
Emulsion
Model Number:
REGENT HIGH GLOSS EMULSION
Packaging & Delivery
Port
Jebel Ali
SOLVOBIT is available as either a DARK or LIGHT colored solution and retains many of the properties associated with traditional SOLVOBIT.
PROPERTIES
Appearance : Brown Liquid
Odour : Characteristic
Ph : Not Applicable
Boiling Point : 90% Distillate Between 160 And 350 C
Flash Point : Approx 70 C
Density :0.910 â?? 1.120 (Kg/M3) At 20 C
Solubility :Insoluble In Water
Miscibility : Miscible With Most Other Tar Products From Both High And Low Temperature Carbonisation Processes. Misible With Most Petroleum Products.
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents.
PROPERTIES
Colour : black
Solids : 70 ± 2%
Specific gravity 1.40 at 25 C
Theoretical Coverage 3 5 m2/lit (@ 70u M)
DRYING TIME : AT 25 T
To touch: 15 min
To Recoat: 2 hours
Max.overcoat interval: Not applicable
Vehicle type: bitumen coal tar
Flash Point: 35C.
Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10C - +70 C
>=100 Gallons
US$ 8.00
Payments:This supplier also supports L/C,T/T,Western Union payments.
>=100 Gallons
US$11.50
Shipping:
Support Sea freight
Payments:This supplier also supports L/C,T/T,Western Union payments.
Quick Details :
Place of Origin:
United Arab Emirates
Usage:
Building Coating, Texture Paint for Exterior and Interior
State:
Liquid Coating
Main Raw Material:
Acrylic
Application Method:
Brush
Brand Name:
Regent Paints
Supply Ability
Supply Ability:
20000 Liter/Liters per Day
Packaging & Delivery
Packaging Details
1 ltr , 4 ltrs , 20 ltrs , 20 KG , 25 KG , 1000 ltrs
1 US Gallon, 5 US Gallon
Port
Jebel Ali
Lead Time :
1 week
A Signature Product defining your value and the feel on the walls of your hones and offices. The sheen, the durability, the coverages impart the most outrageous range to your access.
Velvet Acrylic Emulsion is an environmentally friendly acrylic emulsion based interior decorative coating designed for velvet effects and to simulate a prestigious architectural appearance to the surface. It offers excellent adhesion and an easy to clean coating.
Colour: Full range as per shade card
Finish: Pearlescent-Satin
Vehicle Type: Acrylic
Solids( volume) : 42 �± 2%
Specific gravity: 1.03 �± 0.05
Theoretical Coverage: 260 - 400 sq. ft. per gallon
Packaging & Shipping
Metal drums one US gallon, 5 US gallon, 20 litres, 20 kg, 25 kg and 1000 Litres Totes
Bulk Buying:
1 Totes = 264 Gallons
1 Barrel = 55 Gallons
Bulk Shipping:
We ship containers. And It will accommodate
1 container of 20 feet = 80 barrels
1 container of 20 feet = 18 totes
Matte Premium Latex at the best Performance of durability tests in any walls, woods and few metals as well. An adventurous Range to sustain the sheen level and coverage of solvent based products. Adding value to extra coverage, low voc, non yellowing, acrylic features, water dilution and more. A Regent Hi Performance and durable product.
Matte finish is an Acrylic copolymer based, washable interior/exterior emulsion paint with a smooth flat decorative finish. It offers excellent adhesion and recoat ability. It is with better hiding power and exceptional light and weather resistance.
USES
A Matte - gloss finish, acrylic resin emulsion formulated to protect and beautify interior surfaces. Excellent for masonary (concrete, cement block, cinder block), wall board, stone, brick, and wood. May also be used on properly primed steel.
HI GLOSS LATEX
Hi - Gloss Latex the Glamorous - interior is Latex Acrylic copolymer based Premium Latex-emulsion paint.
A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc.
USES
Regent Paints Hi - Gloss Latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints Hi-Gloss Latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Hi - Gloss Latex.
PROPERTIES
Colour : Full range - as per shade card
Finish : Hi-Gloss
Solids(Volume) : 52% and above
Specific Gravity : 1.27 +/- 0.1
Theoretical Coverage : 250 â?? 400 sq. ft. per gallon
DRYING TIME :â?? AT 25 �° T
Touch Dry : 2 hours
To Recoat : 4 hours
Vehicle Type : Acrylic Copolymer
GULF TEX
Gulf tex heavy texture is water borne acrylic heavily textured coating based on modified styrene emulsion with aggregates ( Mica chips), which provide special pattern on the wall, woods suited for the all climatic condition.
PROPERTIES
Colour : As per shade card
Finish : Texture finish
Consistency: Thixotropic
Solids: 65 % ± 3 %
Specific gravity: 1.70 ± 0.05
Theoretical Coverage 1 -2 m2/ltr
DRYING TIME : AT 25
To handle: 4 hours
To Recoat: overnight
Number of coats: 1
Application by: Roller for heavy tex or Hooper spray
WOOD STAIN
Interior alkyd oil based woods stain that protects and enhances the natural texture of fine wood.
PROPERTIES
Colour : As per cards of colour
Solids: 35%
Theoretical Coverage â??15m2/lt depends of surface
Viscosity : 80 sec ( Ford cup No.4)
Flash Point: 40 �° C
DRYING TIME â?? AT 25 �°
To touch: 6 hours
To Recoat: 12 hours
Specific gravity: 0.89
Solvent: White spirit
TEX PRIMER WHITE
Tollens Tex primer is an acrylic co-polymer primer with very fine aggregates, specially designed for priming masonry surfaces for all water based textured paints
PROPERTIES
Colour : White
Solids: 45% +/- 2%
Theoretical Coverage 9 -10 m2
Recommended film thickness: dry 30u wet 80u
DRYING TIME â?? AT 25 �°
To touch: 1 hour
To Recoat: Min. 5 hours
Vehicle type: acrylic co-polymer
Specific gravity: 1.55
Epoxy Primer Grey is a two pack polyamide cured primer generally used for epoxy system on masonry surface and cement works.
PROPERTIES
Colour : Grey
Finish : Matt
Theoretical Coverage 6-7 m2/lit on masonry surface
Spreading rate is theoretically calculated and can be effected by substrate preparation thinning and methods of application.
Solids (volume) : 24�±2%
Curing time : 3-6 hours at 25 �° C
Full cure : 7 days
Flash point : 25 �° C (ISO 367 â??83)
Specific gravity : 1.00 when mixed A+B
Pot life : 4 hours at 25 �° C
Mixing ratio : 4 parts base"A" : 1 part hardner "B"
Solvent : Epoxy thinner.
High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life. Normally Tollens Epoxy primer grey A+B mixing pot life is 4hrs.As a diluent use Tollens Epoxy thinner 15 â?? 25 %.
Shipping : Support Sea freight
Payments:This supplier also supports L/C payments.
Quick Details
CAS No.:
Acrylic Emulsion
EINECS No.:
Acrylic Emulsion
Main Raw Material:
emlusion
Application Method:
Brush
Brand Name:
REGENT HIGH GLOSS EMULSION
MF:
Acrylic Emulsion
Place of Origin:
GBA-Alderney
Usage :
used for water-based ink and pverprint varnish production
State :
Emulsion
Model Number: :
REGENT HIGH GLOSS EMULSION
100 Gallon/Gallons (Min. Order)
Payments:This supplier also supports L/C,T/T,Western Union payments.
Quick Details
lace of Origin:
United Arab Emirates
Usage:
Building Coating, Texture Paint for interiors and exterior
State:
Alkyd
Model Number:
Regent high gloss enamel Premium
Main Raw Material:
Acrylic
Application Method:
Brush
Brand Name:
Regent Paints
Supply Ability
Supply Ability:
20000 Gallon/Gallons per Day
Packaging & Delivery
Port
Jebel Ali
Lead Time :
As per your Requirement
>=100 Gallons
US$11.50
Payments:This supplier also supports L/C,T/T,Western Union payments.
Place of Origin: United Arab Emirates
Main Raw Material :Acrylic
Usage : Building Coating, Texture Paint for Exterior and Interior
State: : Liquid Coating
A Signature Product defining your value and the feel on the walls of your hones and offices. The sheen, the durability, the coverages impart the most outrageous range to your access.
Velvet Acrylic Emulsion is an environmentally friendly acrylic emulsion based interior decorative coating designed for velvet effects and to simulate a prestigious architectural appearance to the surface. It offers excellent adhesion and an easy to clean coating.
Colour: Full range as per shade card
Finish: Pearlescent-Satin
Vehicle Type: Acrylic
Solids( volume) : 42 ± 2%
Specific gravity: 1.03 ± 0.05
Theoretical Coverage: 260 - 400 sq. ft. per gallonMetal drums one US gallon, 5 US gallon, 20 litres, 20 kg, 25 kg and 1000 Litres Totes
Bulk Buying:
1 Totes = 264 Gallons
1 Barrel = 55 Gallons
Bulk Shipping:
We ship containers. And It will accommodate
1 container of 20 feet = 80 barrels
1 container of 20 feet = 18 totes
Application Method :Brush
Brand Name : Regent Paints
Supply Ability
Supply Ability:
20000 Liter/Liters per Day
Packaging & Delivery
Packaging Details
1 ltr , 4 ltrs , 20 ltrs , 20 KG , 25 KG , 1000 ltrs
1 US Gallon, 5 US Gallon
Port : Jebel Ali
Lead Time : 1 week
>=100 Gallons
US$ 6.50
Payments:This supplier also supports L/C,T/T,Western Union payments.
Payments:This supplier also supports L/C,T/T,Western Union payments.
>=100 Gallons
US$11.50
Shipping:
Support Sea freight
Payments:This supplier also supports L/C,T/T,Western Union payments.
Place of Origin:
United Arab Emirates
Usage:
Building Coating, Wall Coating
State:
LIQUID
Model Number:
High gloss enamel alkyd
Main Raw Material:
ALKYD
Application Method:
Brush
Brand Name:
High gloss enamel alkyd
BULK AND RETAIL:
ALL COLOR
Port
Jebel Ali
Lead Time :
As per your requirements
Main Raw Material ALKYD
Application Method Brush
State LIQUID
Packaging & Shipping
We ship 20 feet containers. It will accommodate
1 US gallon x 4000 CANS
5 US gallon x 950 buckets
1000 liters x 18 Totes
Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%.
Place of Origin:
United Arab Emirates
Usage:
Building Coating, Rubber Coating
Main Raw Material:
bitumen
US$1.00 - US$2.20 / Kilogram | 5 Kilogram/Kilograms (Min. Order)
Payments:This supplier also supports L/C payments.
Quick Details
Place of Origin:
GBA-Alderney
Usage:
Building Coating
State:
Emulsion
Model Number:
REGENT GYPSM PUTTY
Main Raw Material:
GYPSM PUTTY
Main Raw Material:
GYPSM PUTTY
Brand Name:
REGENT GYPSM PUTTY
Supply Ability
Supply Ability:
20000 Ton/Tons per Year
Packaging & Delivery
Port
Jebel Ali
Lead Time :
As per your Requirement
Product DescriptionSpecially designed Gypsum putty for decoration purpose for gypsum board joint, which provides excellent adhesion to the surface, modified water borne acrylic emulsion
Description: Mostly using in interior decoration purpose on concrete Gypsum board, walls, woods, plaster etc
Properties:
Colour: White
Finish: Smooth
Solids: 70%
Specific gravity: 1.65 +/- 0.03
Theoretical Coverage: 2 �¢??3 m2/ltr
Drying time : At 25
To handle: �½ hour
To Recoat: Over night
Number of coats: 1
Precautions:
Keep from freezing, contains water.
May cause eye , nose, and throat and skin irritation.
Keep out of the reach of children
Packing:
Metal drums one US gallon, 5 US gallons
Category: Emulsion. Tags: gypsm putty, putty.
Place of Origin: Alderney
Main Raw Material: Gypsm putty
Packaging & Shipping In 25kg paper bags inner with PE bags
Bulk Shipping:
We ship 20 feet containers. It will accommodate
1 US gallon x 4000 CANS
5 US gallon x 950 buckets
1000 liters x 18 Totes
Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%.
CONTRACTOR LATEX
A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc.
USES
Regent Paints contractor latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints contractor latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Velvet.
ROPERTIES
Colour : Full range - as per shade card
Finish : Matt
Solids(Volume) : 52% and above
Specific Gravity : 1.40 +/- 0.1
Theoretical Coverage : 250 - 400 sq. ft. per gallon
DRYING TIME AT 25 T
Touch Dry : 2 hours
To Recoat : 4 hours
Vehicle Type : Acrylic copolymer
STUCCO PUTTY
A heavy pigmented and highly thixotropic acrylic wall filler, having excellent adherence to the wall and good durability.
PROPERTIES
Colour : White
Finish : Matt
Solids: 70% +/- 2%
Specific gravity: 1.7 +/- 0.03
Theoretical Coverage 5-8 m2/ltr depends of surface
DRYING TIME â?? AT 25 �°
To touch: 1/2 hour
To Recoat: 1 hours
Number of coats: 1-2
ACRYLIC THINNER
IT is a blend of Alcoholâ??s, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings.
PROPERTIES
Colour : Crystal Clear
Odor : Characteristic
Non - volatile matter : Nil
S.g kg/l: 0.850�±0.05
Flash Point (ASTM D93) Not less than 12 �°C
Description
Review
G P THINNER
It is a blend of Alcohol's, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings.
PROPERTIES
Colour : Crystal Clear
Odor: Characteristic
Non-volatile matter : NIL
S.g kg/l :0.850�±0.05
Flash Point (ASTM D93): Not less than 12 �°C
MICRO TEX
Micro tex is a textured coating containing quartz, based on modified Acrylic emulsion, will give a flexible finish with medium textured,
PROPERTIES
Colour : As per shade card
Finish : Light texture finish
Consistency: Thixotropic
Solids: 50 % +/- 2 %
Specific gravity: 1.55
Theoretical Coverage 2.5 â??3.5 m 2/ ltr
DRYING TIME : AT 25 �°
To handle: 3-4 hours
To Recoat: overnight
Number of coats: 1 -2
Application by: Roller or brush
Description
Review
It is suitable for exterior and interior surfaces of cement plaster, concrete, bricks, masonry, asbestos cement panels and suitably primed wood. Magnum helps to conceal any small unevenness and indents in the surface.
APPLICATIONS:
Surface should be clean and dry, before the application of medium Tex. For the fresh concrete Tollens Tex primer should be used as a primer on new surfaces.
SURFACE PREPARATION:
Surface must be clean and free of, chalk, dust, and other contaminants. Clear the surface with wire brush, remove any loose adherence
PRECAUTIONS:
Keep from freezing, contains water. Using at temperatures above 4ï?°C May cause eye, nose, and throat and skin irritation. Keep out of the reach of children
PACKING:
Metal drums one US gallon, 5 US gallons
It is a mixture of aromatic Hydrocarbon, esters, ketone. It is recommended for Polyurethane varnishes due to its average evaporation
PROPERTIES
CHARACTERISTICS APPEARANCE COLOR TRANSPARENT LIQUID
Specific Gravity ASTM D 3505 0.85 �±.02 Kg. / lit.
Colour (Saybolt) ASTM D 1209 +30
Initial Boiling Point ASTM D 850 112�° C
Copper Corrosion ASTM D 849 None
Non â?? Aromatics ASTM D 2360 40 â?? 50%
Flash Point (Abel) IP 170 24 �° C
PRECAUTIONS:
Contents are Combustible. May cause eye, nose, and throat and skin irritation. Keep out of the reach of children
PACKING:
Do not use in tank or pit without proper protection Metal drums one lit. 1US gallon, and 5 US gallons
A general-purpose alkyd based primer with anticorrosive red iron oxide pigment for the protection of steel surfaces against moderate corrosive environments.It is an economical anticorrosive primer for general-purpose applications.
USES
It is recommended for mild steel structures and surfaces in domestic and mild corrosive environments. It is suitable for interior and exterior use.
PROPERTIES
Colour, Dry Film : Red
Finish, Dry Film : Smooth/Matt
Volume Solids, % 51�± 2
Specific Gravity : 1.46�± 0.05
Theoretical Spreading Range : 11-12 M2/L
Recommended Dft Range (Dry Film Thickness) : 35-45 Microns/Coat
Recommended Wft Range (Wet Film Thickness) : 75-90 Microns/Coat
Flash Point : 38 �° C
Flexibility : Good
Drying Time : @ 30 �° C (Temperature, humidity, air movement, film thickness and number of coats all affect the drying time.)
Dry To Recoat/Overcoat : 12 Hours
Hard Dry : 24 Hours
Shipping : Support Sea freight
Payments:This supplier also supports L/C payments.
Quick Details :
CAS No.:
Acrylic Emulsion
EINECS No.:
Acrylic Emulsion
Main Raw Material:
emlusion
Application Method:
Brush
Brand Name:
REGENT HIGH GLOSS EMULSION
MF:
Acrylic Emulsion
Place of Origin:
GBA-Alderney
Usage:
used for water-based ink and pverprint varnish production
State:
Emulsion
Model Number:
REGENT HIGH GLOSS EMULSION
>=100 Liters
US$ 2.50
Payments:This supplier also supports L/C,T/T,Western Union payments.
>=100
US$11.50
Payments:This supplier also supports L/C payments.
Quick Details
Other Names:
latex paint
Main Raw Material:
Acrylic
Application Method:
Brush
Brand Name:
Regent Paints
Place of Origin:
AE-United Arab Emirates
Usage:
Building Coating, Texture Paint for Exterior and Interior
State:
Liquid Coating, Liquid Coating
Model Number:
ASSOCIATED PAINTS INDUSTRY CO. LLC
Supply Ability
Supply Ability:
20000 Liter/Liters per Day
Packaging & Delivery
Port : Jebel Ali
Lead Time : 1 week
This product is designed with respect to deluver utility of economies to the Project with its ability of performance. Best Recommended for interiors.
Finish: Matt
Solids(volume) 52%
Specific gravity: 1.00 +/- 0.1
Theoretical Coverage: 250-400 sq. ft. per gallon
State : Liquid Coating
Brand Name : Regent Paints
Main Raw Material : Acrylic
Packaging & Shipping
Bulk Shipping:
We ship 20 feet containers. It will accommodate
1 US gallon x 4000 CANS
5 US gallon x 950 buckets
1000 liters x 18 Totes
Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%
Regent Plastic Emulsion - interior is Latex Acrylic copolymer based Premium Latex - emulsion paint.
A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc.
USES
Regent Plastic Emulsion is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Plastic Emulsion like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Regent Plastic Emulsion.
PROPERTIES
Colour : Full range - as per shade card
Finish : Flat
Solids(Volume) : 52% and above
Specific Gravity : 1.4 +/- 0.1
Theoretical Coverage : 250 - 400 sq. ft. per gallon
DRYING TIME : AT 25 T
Touch Dry : 2 hours
To Recoat : 4 hours
Vehicle Type : Acrylic Copolymer
Latex at the best Performance of durability tests in any walls, woods and few metals as well. An adventurous Range to sustain the sheen level and coverage of solvent based products. Adding value to extra coverage, low voc, non yellowing, acrylic features, water dilution and more. A Regent Hi-Performance and durable product.
A water - base, acrylic semi-gloss paints for interior surfaces. Excellent for heavy use areas such as walkway walls, doors, trim and kitchen cabinets.
USES
A semi - gloss finish, acrylic resin emulsion formulated to protect and beautify interior surfaces. Excellent for masonary (concrete, cement block, cinder block), wall board, stone, brick, and wood. May also be used on properly primed steel.
Velvet Acrylic Emulsion is an environmentally friendly acrylic emulsion based interior decorative coating designed for velvet effects and to simulate a prestigious architectural appearance to the surface. It offers excellent adhesion and an easy to clean coating.
USES
Velvet Acrylic Emulsion is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create atractive aesthetic velvet like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Velvet.
FLAT VARNISHES
An oxidative drying varnish based on a mixture of alkyds and drying oils.
PROPERTIES
Colour : Transparent; flat
Solids: 42%
Theoretical Coverage 6 â?? 7 m2/lit
DRYING TIME :â?? AT 25 �°
To handle: 4 hours
To Recoat: 8 hours
Flash point: 38 �° C ( ISO 367 â??83)
Specific gravity: 0.90
Solvent: G.P. thinner.max.up to 10% to b added
Industrial Fast drying enamel black.
RECOMMENDED USE
On metallic surfaces, especially suited for heavy equipments, vehicle etc, especially for defense purpose.
PROPERTIES
Colour : Special colors available on request.
Finish : Smooth and glossy
Volume Solid: 35 �± 2 %
Viscocity: 200 �± 15 secs in ford cup no. 4. @ 30�ºc
S.G. Kg/l: 1.05
Theoritical coverage rate: 10 â?? 12m�²/ ltr
Recommended (D.F.T.) Microns 30
Recommended (W.F.T.) Microns 90
Stoving schedule: 120�ºc for 30 minutes
>=100 Gallons
US$ 11.50
Shipping:
Support Sea freight
Payments:This supplier also supports L/C,T/T,Western Union payments.
Overview
Quick Details
Place of Origin:
United Arab Emirates
Usage : Building Coating, Texture Paint for Exterior and Interior
State:
Liquid Coating
Main Raw Material : Acrylic
Application Method : Brush
Brand Name : Regent Paint
Supply Ability
Supply Ability : 20000 Liter/Liters per Day
Packaging & Delivery
Packaging Details : 1 ltr , 4 ltrs , 20 ltrs , 20 KG , 25 KG , 1000 ltrs
1 US Gallon, 5 US Gallon
Port
Jebel Ali
Lead Time :
1 week
Product Description
It is a premium hi end value product that provides the super finishing sheen of egg shell sheen. It imparts the excellence of hi Coverage, beauty durability. It's packed with low voc and washability, high scrub resistance. Best for all walls.
Eggshell Acrylic Emulsion is a superior quality acrylic co-polymer based, highly washable emulsion paint for interior/exterior surfaces. It has excellent alkali resistance and weather resistance property. It provides an anti-chalking smooth lustrous eggshell finish having excellent UV resistance
Colour: Full range as per shade card
Finish: Smooth / Eggshell Matt
Vehicle Type: Acrylic
Solids( volume) : 44 - ± 2%
Specific gravity: 1.40 ± 0.05
Theoretical Coverage: 260 - 400 sq. ft. per gallon
Packaging & Shipping
Metal drums one US gallon, 5 US gallon, 20 litres, 20 kg, 25 kg and 1000 Litres Totes
Bulk Buying:
1 Totes = 264 Gallons
1 Barrel = 55 Gallons
Bulk Shipping:
We ship containers. And It will accommodate
1 container of 20 feet = 80 barrels
1 container of 20 feet = 18 totes
>=100 Liters
US$ 50.00
Payments:This supplier also supports L/C,T/T,Western Union payments.
>=100 Gallons
US$ 1.99
Payments:This supplier also supports L/C,T/T,Western Union payments.
>=100 Gallons
US$ 1.99
Payments:This supplier also supports L/C,T/T,Western Union payments.
100 Gallon/Gallons (Min. Order)
Payments:This supplier also supports L/C,T/T,Western Union payments.
Quick Details
Place of Origin:
United Arab Emirates
Usage:
Building Coating, Texture Paint for interiors and exteriors.
State:
Alkyd
Model Number:
Regent high gloss enamel Premium
Main Raw Material:
Acrylic
Application Method:
Brush
Brand Name:
Regent Paints
Supply Ability
Supply Ability:
20000 Gallon/Gallons per Day
Packaging & Delivery
Port
Jebel Ali
Lead Time :
As per your Requirement
High gloss enamel is formulated to meet the extremes of exterior exposure in addition to performing the functions of high durable interior enamel for use in bathrooms, kitchens, and laundries.
Colour: Full spectrum
Solids: 52 % +
Gloss: 80 Above
Theoretical Coverage: 350 - 500 sq. ft. per gallon
Recommended film thick. 63(wet); 29�?�¼ (dry)
Drying time At 25:
To handle: 4 hours
To Recoat: 24 hours
Vehicle type: Modified alkyd
Specific gravity: 1.0 - 0.1
Flash point: 23C
Categories: Decorative Paints, alkyd base enamel paint, Premium Range.
Description Reviews
Packaging & Shipping1 ltr , 4 ltrs , 20 ltrs , 20 KG , 25 KG , 1000 ltrs
1 US Gallon, 5 US Gallon
Bulk Shipping:
We ship 20 feet containers. It will accommodate
1 US gallon x 4000 CANS
5 US gallon x 950 buckets
1000 liters x 18 Totes
>=100
US$11.50
Shipping:
Support Sea freight
Payments:This supplier also supports L/C payments.
Place of Origin: ;
AE-United Arab Emirates
Usage: :
Building Coating, Texture Paint for
State:
Liquid Coating, Liquid Coating
Main Raw Material:
Acrylic
Application Method:
Brush
Brand Name:
Regent Paints
Packaging & Delivery
Port
Jebel Ali
Lead Time :
As per your requirements
Product Description
Main Raw Material Acrylic
Brand Name Regent Paints
Application Method Brush
Mono Coat Egg Shell Latex - interior is Latex Acrylic copolymer based Premium Latex - emulsion paint
A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc.
USES
Regent Paints Mono Coat Egg Shell Latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints Mono Coat Egg Shell Latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Mono Coat Egg Shell Latex.
PROPERTIES
Colour : Full range - as per shade card
Finish : Egg Shell
Solids(Volume) : 52% and above
Specific Gravity : 1.27 +/- 0.1
Theoretical Coverage : 350 â?? 450 sq. ft. per gallon
DRYING TIME :â?? AT 25 �° T
Touch Dry : 2 hours
To Recoat : 4 hours
Vehicle Type : Acrylic Copolymer
ACRYLIC TOP COAT
it is an acrylic resin based premium top coat for metals. It has exceptional color and gloss retention in a variety of climatic condition.
PROPERTIES
Colour : full range
Solids: 38 + 2 %
Theoretical Coverage 9 â??12 m2/Lit
Recommended (Dft) : 30 - 40 Microns/ per coat
Recommended (Wft) : 90-100 Microns/ per coat
DRYING TIME â?? AT 25 �°
Surface Dry: 5-10 mins
To Recoat: 3 â?? 4 hours
Vehicle type: Modified alkyd
Specific gravity: 1.15 �±0.05 (depends on color)
solvent based fire retardant paint, based on special resins and Chemicals. The dried film gives good resistance against fire and Protection to base substrate.
RECOMMENDED USES
As fire retardant topcoat paint on wood, steel and concrete surface. At recommended thickness it has excellent fire retardant properties.
ADVANTAGES
One component special resin based paint, easy to apply, excellent water, weather and U.V. resistance. Dry film has excellent fire retardant properties
High quality decorative alkyd enamel for use as topcoat on alkyd primers or undercoat.
PROPERTIES
Colour : Aluminium
Solids : 40%
Theoretical Coverage 10 â??12 m2/lit @ 25u DFT
DRYING TIME :â?? AT 25 �° T
To handle: 4 hours
To Recoat: 24 hours
Vehicle type: Modified alkyd
Specific gravity: 1.0 +/- 2%
Flash point: 38�°C
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents.
PROPERTIES
Colour : black
Solids : 70 �± 2%
Specific gravity 1.40 at 25�° C
Theoretical Coverage 3 â?? 5 m2/lit (@ 70u M)
DRYING TIME :â?? AT 25 �° T
To touch: 15 min
To Recoat: 2 hours
Max.overcoat interval: Not applicable
Vehicle type: bitumen â??coal tar
Flash Point: 35�° C.
Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10�° C - +70�° C
DECORTEX
D�©cor tex is water borne acrylic texture based on modified styrene emulsion with aggregates, which provide special pattern on the wall, woods suited for all climatic condition
PROPERTIES
Colour : As per shade card
Finish : Texture finish
Consistency: Thixotropic
Solids: 65 % �± 3 %
Specific gravity: 1.70 �± 0.05
Theoretical Coverage 1 -2 m2/ltr
DRYING TIME :â?? AT 25 �° T
To handle: 4 hours
To Recoat: overnight
Number of coats: 1
Application by: Roller for heavy tex or Hooper spray
Epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor.
PROPERTIES
Colour : Available in pastel and dark shades
Finish : High gloss/Egg Shell
Theoretical Coverage 7-8 m2/ lit
Curing time: 15 â??20 hours at 25�° C
Full cure: 7 days
Flash point 22�°C (ISO 367 â??83)
Specific gravity: 1.35+.05 when mixed A+B
Pot life: 8 hours at 25�° C
Mixing ratio: 4 parts baseâ??Aâ?? : 1 part hardner â??Bâ??
Solvent: Epoxy thinner.
High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
Multi-purpose bitumen coal tar emulsion.
PROPERTIES
Gloss level: matt (ISO 2813-78)
Solids: 25% (+/- 2 %)
Viscosity: 22000 cps @25 �°C Brookfield 4/4)
Theoretical Coverage 1 â?? 1, 5 m2/lit (@ 40u)
DRYING TIME â?? AT 25 �°
To touch: 1 hour
To Recoat: 24 hours
Max.overcoat interval: Not applicable
Vehicle type: bitumen â??coal tar
Specific gravity: 1.03 (+/- 2%)
Flash point: Inflammable liquid.
High quality alkyd enamel white for use on all wood, metal or masonry surfaces. This product is extremely durable with excellent flow and leveling characteristics.
PROPERTIES
Colour : Milky white
Solids : 55�±2 %
Theoretical Coverage: 10 â??12 m2/Lit
DRYING TIME : â?? AT 25�°
To handle: 4 â??6 hours
To Recoat: 8 - 12 hours
Vehicle type: Modified alkyd
Specific gravity: 1.10 �±0.02%(depends on color)
Viscosity : 95�±15 second in Ford Cup No.4
Flash point: 37�°C
Tollens epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor.
PROPERTIES
Colour : Available in pastel and dark shades
Finish : High gloss/Egg Shell
Theoretical Coverage 8 m2/ lit
Curing time: 15 - 20 hours at 25 C
Full cure: 7 days
Flash point 22C (ISO 367 - 83)
Specific gravity: 1.35 when mixed A+B
Pot life: 8 hours at 25�¯
Mixing ratio: 4 parts base A: 1 part hardner B
Solvent: Epoxy thinner.
High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
>=100 Liters
US$ 5.00
Payments:This supplier also supports L/C,T/T,Western Union payments.
>=100 Gallons
US$ 3.50
Payments:This supplier also supports L/C,T/T,Western Union payments.
Polyurethane Coating is two component chemically cured product that forms a film that is resistant to chemicals, solvents and abrasion.
PROPERTIES
Colour : Full spectrum
Solids: 50 +/- 2 %
Theoretical Coverage 10 - 11 m2/lit
DRYING TIME : AT 25 C
To handle: 3 hours
To Recoat: 5 hours
Flash point: 27C
Specific gravity: 1.10 �±0.05
Pot life: 6 hours
Mixing ratio: 4 parts base "A" :1 part hardner "B"
Solvent: Polyurethane thinner.
High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
A two pack high build epoxy Polyamide based under coat containing inert pigments. It is recommended as a final coat in an Epoxy system
CHARACTERISTICS
High build in single coat.
Excellent resistance to fresh and salt water
Abrasion resistance and flexible films.
Excellent inter-coat adhesion.
Resistant to solvents.
Resistance to mild acids.
USES
Coating for long term protection for structural steel, concrete surface and internal lining of edible oil tanks, and fuel tanks. Suitable for marine installations, power plants, fertilizers, hospitals, laboratories, etc.
A vinyl acrylic primer designed for priming masonry surfaces
PROPERTIES
Colour : Full range- as per shade card
Finish : Smooth / Matt
Solids(volume): 24 �±2%
Specific gravity: 1.40 �± 0.05
Theoretical Coverage 7-8 m2/ltr @ 40 DFT
DRYING TIME :AT 25
Touch dry: 2 hours
To Recoat: 4 hours
MASONARY PRIMER
It is specially formulated to give a very high level of adhesion and deep penetration into the concrete, which also offers a medium level of opacity.
PROPERTIES
Colour : Full range- as per shade card
Finish: Matt
Solids (volume) : 36%
Specific gravity: 1.45 +/- 0.03
Theoretical Coverage 6-7 m2/ltr @ 40�¯� DFT
DRYING TIME : AT 25
Touch Dry: 2 hours
To Recoat: 4 hours
Vehicle type: PVA copolymer
>=100 Gallons
US$ 1.99
Payments:This supplier also supports L/C,T/T,Western Union payments.
WOOD PRIMER
Specially formulated alkyd base wood primer for interior and exterior use. May be used under topcoats such as alkyds,oils,or latex paints.
PROPERTIES
Colour : White -pinkish
Solids: 45%
Theoretical Coverage 8 - 10 m2/lit
DRYING TIME : AT 25
To handle: 2 hours
To Recoat: 24 hours
Vehicle type: Modified alkyd
Specific gravity: 1.40
Flash point: 35C
