MATERIAL : HIGH TENSILE MANGANESE BRONZE
COMPOSITION : Cu= 60 65%
Al= 3-7.5%
Fe= 2-5%
Mn= 2.5-5%
Zn = balance.
HARDNESS : 180-210 BHN
LOAD : 750 N/mm2
PV VALUE : 20 N/cm2
DETAILS : It has a backing made of high tensile manganese bronze with a Special filling of prescription of solid lubricant inserted with certain angle & Density into the surface and processed with precision finishing. It is mainly Used for high load and moderate speed application.
BUSHES & PLATES CAN BE DEVELOPED WITH ANY SPECIFICATIONS AS PER CUSTOMERS REQUIREMENTS.
Supplier: Bushes & parts made out from, sintered bronze (self lubricating), mdu/mdx (dry bushes & washers) graphite filled bronze bushes & plates, wrapped bronze bushes, bi metal bushes, non ferrous bushes. (gun metal, phosphor bronze, aluminum bronze etc.) half shell bush bearing
The chemical properties of graphite are very stable, high temperature resistance, corrosion resistance, and good conductivity.Therefore, graphite can be used as refractory material, sealing material, conductive material, and is widely used in high temperature metallurgy, sand finding, paint lubricant, pencil lead, pigment, polishing agent, petrochemical industry, synthetic fiber, heater and other industries.
Supplier: Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps
Buyer: Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps
Natural graphite
Supplier: Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46)
UHP 400mm*1800mm UHP 450mm*1800mm Used in steel, cement and glass manufacturing, expanded graphite - based sealing gaskets, graphite grease, braid, brushes, brake lining, etc.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact