Black Masterbatch Made in Vietnam
1. Commodity:
Black Masterbatch is a type of polymer materials dedicated colorants, pigments, also known as preparation of materials (Pigment Preparation). It consists of pigments or dyes, and additives vector composed of three basic elements, is the extraordinary among pigments or dyes evenly attached to the resin contained in the aggregate have been, can be said to concentrate pigment (Pigment Concentration), so shading power than his own pigments.
2. Application:
1) Blowing film.
2) Injection molding.
3) Extrusion.
4) Applicable: PP, PE, ABS, PA, PS, PVC., etc
5) Many other application
3. Packing:
In PP bag or PE bag, 25kgs/bag
N.W: 20-23MT/cont 20
4. Payment term:
TT/LC at sight at the first class bank.
5. Delivery time:
5-7 days after receipt the first advance or original LC.
1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc. 2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products. 3.Polyethylene glycol series products can be used as raw materials for ester surfactants. 4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry. 5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface. 6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler. 7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity. 8.PEG-4000 and PEG-6000 . 9.PEG8000 .
Basic information: 1.Molecular formula: Co3O4 2.Molecular weight: 240.797 3.CAS No.: 1308-06-1 4.Purity: Co:72%min 5.Storage: Keep the receptacle sealed and stored in a cool and dry place, and ensure that the working room has good ventilation or exhaust device. Cobalt Tetroxide is similar to ferroferric oxide, and can be approximately regarded as a compound formed by cobalt oxide (CoO) and cobalt oxide (Co2O3). Black or grayish black powder. The apparent density is 0.5-1.5g/cm3, and the tap density is 2.0-3.0g/cm3. Cobalt Tetroxide can be slowly dissolved in hot sulfuric acid, but it is insoluble in water, n itric acid and h ydrochloric acid at room temperature. When heated above 1200 C, it will decompose into cobaltous oxide. When it is strongly heated to 900C in a hydrogen flame, it is reduced to metal cobalt.
Supplier: Plastic masterbatches, color masterbatch, black masterbatch, white masterbatch, caco3 masterbatch, functional masterbatch, hot melt adhesive for book binding, packaging
Services: Tt, da, dp, lc payment terms available
cfr, cif incoterms
Our production range is Color, Black / White, Filler, Functional Masterbatch from our factory in Korea, Vietnam and China. We are proud that our products meet demands of several sensitive colors and that they are sub-divided with wide range of choice.
Product description Our company manufacture and export iron oxide. Herewtih please find our specification as follow: Re: iron oxide red y101/110/120/130 Appearance: red power Specification: Content: 96% Moisture: 1.0% Ph value: 3.5-8 Oil absorption: 15-25 Water-soluble matter: 0.3% 45um sieve residue: 0.2% Tinting strength: 95-105% Density approx: 5.0-5.1 cm¦ Re: iron oxide red y190 Appearance: red power Specification: Content: 95% Moisture: 1.0% Water-soluble matter: 0.3% 45um sieve residue: 0.2% Ph value: 3.5-8 Oil absorption: 15-25 Tinting strength: 95-105% Density approx: 5.0-5.1 cm¦ Iron oxide brown 610 Appearance: brown powder Specification: Content: 92% Moisture: 1.0% Water-soluble matter: 0.5% 45um sieve residue: 0.3% Ph value: 4-7 Oil absorption: 20-30 Tinting strength: 95-105% Density approx: 4.8 cm¦ Iron oxide black 780 Appearance: black powder Specification: Content: 93% Moisture: 1.0% Water-soluble matter: 0.5% 45um sieve residue: 0.3% Ph value: 5-8 Oil absorption: 15-25 Tinting strength: 95-105% Density approx: 4.5-5.0 cm¦ Re: iron oxide yellow y311/313 Appearance: yellow power Specification: Content: 86% Moisture: 1.0% Water-soluble matter: 0.3% 45um sieve residue: 0.3% Ph value: 3.5-7 Oil absorption: 25-35 Tinting strength: 95-105% Density approx: 4.0-4.3 cm¦ Iron oxide blue Appearance: blue powder Specification: Moisture: 1.0% Water-soluble matter: 0.5% 45um sieve residue: 0.3% Tinting strength: 95-105% Packing: 25 kgs in net bag, 23 mts in the 20'fcl (iron oxide red), 13 mts/ 20'fcl (iron oxide yellow). Uses: construction, coating & paint, ink, rubber, plastic
This is about the specification about Aluminum Sulphate Al2O3: 15.80%min Fe: 0.45%max PH: 3.0min Water Insolubles: 0.15%max As: 0.0005%max Pb: 0.002%max Al2O3: 16.00%min Fe: 0.40%max PH: 3.0min Water Insolubles: 0.15%max As: 0.0005%max Pb: 0.002%max Al2O3: 17% min Fe: 0.30% max PH: 3.0min Water Insolubles: 0.15% max Aluminium Sulphate Non Ferric Alumina: 17 % Iron: 0.01% Water insoluble: 0.5 % PH: 2.6 Size: Lumps/granules/Powder.
Product description We manufacture and export chrome oxide green. Herewith please find our specification as follow: Re: chrome oxide green xy-01 Appearance: light to dark green powder Specs: cr2o3 99% min Moisture: 0.3% max Water soluble matter: 0.4% max Residue (325 mesh): 0.3% max Re: chrome oxide green xy-02 Appearance: light to dark green powder Specs: cr2o3 99% min Moisture: 0.2% max Water soluble matter: 0.4% max Residue (325 mesh): 0.3% max Heat stability: 1200centigrade Appearance: green powder with strong coloring strength and good dispersion. Any of your interest, please feel free to contact me. We must try our best to meet your request. Welcome a chance to start business with you.
Product Description We manufacture lithopone as follow: Re: Lithopone Standard: B301 Appearance: White power Specification: Zinc(as ZnS ) (m/m): 28% min Zinc Oxide (m/m): 0.6% min Volatile matter: 0.3% max Matter soluble in water: 0.4% max Screen residues (63um mesh)(m/m): 0.1%max Oil absorption g/100g: 14 max Re: Lithopone Standard: B302 Appearance: White power Specification: Zinc(as ZnS ) (m/m): 28% min Zinc Oxide (m/m): 0.3% min Volatile matter: 0.3% max Matter soluble in water: 0.4% max Screen residues (63um mesh)(m/m): 0.1%max Oil absorption g/100g: 11 max Re: Lithopone Standard: B311 Appearance: White power Specification: Zinc(as ZnS ) (m/m): 30% min Zinc Oxide (m/m): 0.3% min Volatile matter: 0.3% max Matter soluble in water: 0.3% max Screen residues (63um mesh)(m/m): 0.1%max Oil absorption g/100g: 10 max The package and the specification we can do as your request. If possible, please send us your exact enquiry, including the quantity and the destination etc. We must give you our best price for your consideration.
Fulvic acid is actually an umbrella term used to talk about a group of natural acids that are found alongside humic acids in healthy soils, rocks, coal and large bodies of water. In it's extracted form, Fulvic acid can be either a liquid or a powder and it is often yellow, amber, brown or black in colour.These organic acids are the end result of millions of years of decomposing plant matter and are essentially by-products of the trillions of bacteria that inhabit the soil. The microscopic hairs on plant roots are the favored home to these bacteria, producing Fulvic Acid and other compounds which act as the bridge between organic lifeforms and inorganic trace minerals and metals. Scientists have found it impossible to synthesize Fulvic Acids in a laboratory due to their complex nature. FA-01 FA-02 FA-03 FA>90-95% PH:5-6 Solubility 100% Moisture70% PH:5-6 Solubility>99% Moisture60% k2o :8% PH:7~9 Solubility>99% Moisture60~65% Fulvic acid(dry basis)>10%~15% K2O>10% Solubility>100%~99.8% PH:9~11 Technical Data Sheet Fulvic acid --60%fulvic acid powder Name of Product: Fulvic acid Formulation Type: Percentage of raw materials Fulvic acid : 60%~65%K2o : 8Source : Molasses sourceMoisture: 5 %maxAppearance: brown yellow powder Type of Packing: 25 kg bags Proposal Usage: 1.Soil application, apply 4.5kg-7.5kg/mu without mixing other chemicals or pesticides ,concentration suggested 0.1-0.15% or as per soil condition for end users; 2.Foliar appliaction, apply 400grams/mu at the concentation of 0.1-0.15%; 3.Root application, apply 4.5-7.5kg/mu or as per soil condition & plant growth condition; Function: â?¢ Proper control of crop leaf stomatal openness â?¢ Reduce transpiration,have an important role for drought â?¢ Anti- dry hot wind,Improve stress tolerance of crops â?¢ Increase in yield, Improve the quality of crops â?¢ Stimulate crop growth , Enhance root activity â?¢ Prevent premature aging, Improve the various enzyme activities â?¢ Increase the chlorophyll content, Improve the quality of the fruit â?¢ Have synergies when mix with some non - alkaline pesticides â?¢ Increase fertilizer use efficiency â?¥20% Shelf Life: 1 years
