Api Center Latch Tubing Ta Elevator Ta100

The following example is for you reference:
1.Description:
Model TA center latch elevator with square shoulder are suitable for handling drill pipes,drill collars,casing and tubings.These elevators are balanced for easy handling with safety lock and latch and guarded operating handles.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.

2.Key Words: TA Type elevator, drilling elevator, center latch elevator.

3.Features:
(1).API certified products with national best standard.
(2).Short on deliver time.
(3).100% NDT test hydraulic test for all product.
(4).Warranty 12 month after sales.
(5).Load capacity from 35 tons to 150 tons.

4.After-sales Service Provided: No overseas service provided.

5.Warranty: one year.

6.Certificaiton: API 8A/8C.

7.Condition: New.

8.Color: Red.

9.Model: TA-35; TA-65; TA-100; TA-125; TA-150.

10.Rated Capacity(short tons): 35~150.

11.Size(in): 2 7/8"~10 3/4".

12.Place of Origion: China(Mainland).

13.Minimun Order: 1Set(s).

14.Material: Carbon Steel.

15.Processing Type: Forging.

16.Machine Type: Drilling Tool.

17.Use: Well Drilling.

18.Processing Time: 30days.

19.Supply Ability: 300sets/per month.

20.Payment Terms: T/T; L/C; Western Union.

21.Packing&Delivery:
(1).Packing Details:Standard Export Package.
(2).Port:China Main Port.

The following example is for you reference:
1.Description:
Model DD center latch elevators with square shoulder are suitable for handling drill collars,casings and tubings.The load ranges from 150 tons to 350 tons and the size ranges from 2 3/8 to 5 1/2.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.

2.Key Words: Drilling Elevator, Center Latch Elevator, DD Type Elevator.

4.After-sales Service Provided: No overseas service provided.

5.Warranty: one year.

6.Certificaiton: API 8A/8C.

7.Condition: New.

8.Color: Red.

9.Model: DD-100; DD-250; DD-350.

10.Rated Capacity(short tons): 150~350.

11.Size(in): 2 3/8"~5 1/2".

12.Place of Origion: China(Mainland).

13.Minimun Order: 1Set(s).

14.Material: Carbon Steel.

15.Processing Type: Forging.

16.Machine Type: Drilling Tool.

17.Use: Well Drilling.

18.Processing Time: 30days.

19.Supply Ability: 200sets/per month.

20.Payment Terms: T/T; L/C; Western Union.

21.Packing&Delivery:
(1).Packing Details:Standard Export Package.
(2).Port:China Main Port.

* PHOSCAST
Phoscast : Phosphate Bonded Castables

* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.

BACKGROUND

* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.

* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion

* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.

APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.

The elevators are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.

TA center latch elevators with square shoulder are suitable for handling, drill collar, casing and tubing. The products are designed and manufactured according to the requirements in API Spec 8C specification for Drilling and production Hoisting Equipment

Brief Introduction :

1.high quality alloy steel processing, light weight, small size, big load, greatly reduce the work intensity.



2.composed of main parts, hand door, lock pin assembly and hand shank etc. through technological

transformation, the users can easily confirm the hand door open or not and greatly reduce the occurrence

of safety accidence.



3.double proofed safety pin has been invented after many years reaserch and practical operation, which

have obtained good reputation from the oilfield workers.
We are a professional manufacturer of oil down hole tools , high quality and reasonable price .



Any problem about our products , welcome here .

The TA Style centralized Elevators are used for tubing, casing and drill collars. These elevators are balanced for easy handling with safety lock and latch and guarded operating handles. Sizes range from 35 to 150 ton and cover all size tubular from 1.05inch to 10 3/4 inch, this elevator is made according to API 8C.

Root elevator for all pattern

Plays music
Announcer floor numbers
Announcer special messages
Announces ard messages