For different thickness material continuous punching use
Work together with uncoiler machine for automatic production
Can be customized
Feature of SNL Straightener:
This is a special designed straightener for material that need high precision punching treatment. As we all know, coil material fails in the key functions without the flattening and stress relieving treatments.
The flattening and the straightening secondary wheels adopt the imported SUJ2, milling after HRC60°heat treatment, and starts production after plating the hard chrome to ensure the evenness of the chrome layers and the form tolerances of each bearing.
The flattening adjusting adopts the floating four-point balancing equipment, with the dial indicator which can find the leveling point rapidly.
Each straightening wheel of the S series precision straightener adopts the secondary straightening wheel to prevent the distortion in the manufacturing process from happening, which improve the products flatness quality.
With the fixed bottom secondary roller enhanced the bottom wheel rigidity and prevent it distorts.
Upper secondary roller adopts the floating style, and obtains different pressure according to the requirement, to strengthen the life of the straightening wheel and improve the surface flatness requirement of the panel.
The transmission wheel adopts the compellent cycling immersion oil lubrication to reduce the wheel abrasion and be able to work under the high temperature condition for a long time.
Adopts the synchronous transmission structure to transfer each leveling roller individually to lower the panel surface flatness improving requirement because of the interspace caused by wheels rotating.
The additional lubricating system prolonged the machine life span and enables it to work under the stable condition in a long time.
Due to the differences of the material quality, width and thickness, there are no fixed values as the preferences; therefore, taking some materials for pilot run before the mass production and start the continuous assembly after it reaches the standard.
For different thickness material continuous punching use Work together with uncoiler machine for automatic production Can be customized Feature: 1. It is updated product of H series straightener specially designed for punching super thin products. As we all know, coil material can not produce good products without flattening and stress relieving treatments; therefore, the performance of the straightener is critical in the production process. 2. The flattening and the straightening secondary wheels adopt imported SUJ2, milling after HRC60° heat treatment and starts production after plating the hard chrome to ensure the evenness of the chrome layers and the form tolerances of each bearing. 3. The flattening adjusting adopts the floating four-point balancing equipment, with the dial indicator which can find the leveling point rapidly. 4. Every straightening wheel of S series precision straightening machine is equipped with leveling assistant wheel to ensure that it will not be bent in the production process, thus improving the flatness quality of products. 5. The fixed type of auxiliary roller improves the rigidity of the lower wheel and prevents deformation under force. 6. The upper auxiliary roller is of floating type, to obtain different pressure according to needs, strengthen the leveling strength life of leveling wheel and improve the flatness requirement of plate surface. 7. The transmission gear is lubricated by forced cycle immersion oil, which can reduce the wear of the gear and work under high temperature for a long time. 8. The transmission mechanism adopts synchronous and independent transmission for each leveling roller, which reduces the side clearance tolerance accumulated by gear group transmission and improves the flatness requirement of plate. 9. The addition of lubrication system can prolong the life of the machine and keep the machine in stable working state for a long time. 10. Because material is qualitative, makings width and makings thick different, do not have unified numerical reference so, because this suggests, take before large quantities of production small segment material tries correction first, wait for after achieving the effect again successive production. 11. Universal energy saving drive, high performance aluminum and stainless steel straighteners.
For different thickness material continuous punching use Work together with uncoiler machine for automatic production Can be customized Feature: 1. It is updated product of H series straightener specially designed for punching super thin products. As we all know, coil material can not produce good products without flattening and stress relieving treatments; therefore, the performance of the straightener is critical in the production process. 2. The flattening and the straightening secondary wheels adopt imported SUJ2, milling after HRC60° heat treatment and starts production after plating the hard chrome to ensure the evenness of the chrome layers and the form tolerances of each bearing. 3. The flattening adjusting adopts the floating four-point balancing equipment, with the dial indicator which can find the leveling point rapidly. 4. Every straightening wheel of S series precision straightening machine is equipped with leveling assistant wheel to ensure that it will not be bent in the production process, thus improving the flatness quality of products. 5. The fixed type of auxiliary roller improves the rigidity of the lower wheel and prevents deformation under force. 6. The upper auxiliary roller is of floating type, to obtain different pressure according to needs, strengthen the leveling strength life of leveling wheel and improve the flatness requirement of plate surface. 7. The transmission gear is lubricated by forced cycle immersion oil, which can reduce the wear of the gear and work under high temperature for a long time. 8. The transmission mechanism adopts synchronous and independent transmission for each leveling roller, which reduces the side clearance tolerance accumulated by gear group transmission and improves the flatness requirement of plate. 9. The addition of lubrication system can prolong the life of the machine and keep the machine in stable working state for a long time. 10. Because material is qualitative, makings width and makings thick different, do not have unified numerical reference so, because this suggests, take before large quantities of production small segment material tries correction first, wait for after achieving the effect again successive production.
Feature: 1. After the material straightened by this machine, it is smooth and without any indentation ,not damage the material surface. It is suitable for all kinds of metal plates. 2. This machine is made of Japanese electromagnetic contact and electronic parts. It does not damage the surface of materials. It is suitable for all kinds of metal plates. 3. This machine can be used alone, also can be used together with MT type and DBMT type automatic feeding rack.
For different thickness material continuous punching use Work together with uncoiler machine for automatic production Can be customized Feature: 1.This series of straighteners are specially designed for the terminal products requiring high precision planningã??As we all know, coil material without leveling and stress elimination is not able to produce good product, so the performance of straightener in production plays a key role, and most of the precision straightener cost too much, so we introduced this superior and cheap product. 2.The straightening wheel and auxiliary wheel of this machine are made of imported SUJ2, and they are ground after heat treatment HRC60 degrees, starts production after plating the hard chrome and the milling to ensure the uniform of the chrome layers and the form tolerances of each bearing.ã?? 3. The flattening adjusting adopts the single point balancing equipment ,with the index ring, which can find the leveling point rapidly. 4. Except the straightening roller, the additional feeding wheel improves the material punching precision. 5. Adopt the high precision wheels to prolong the operation time, and the frequency converter can be choosen according to the clients requirement, which enable the special material panel straightening more competitive. 6. Due to the difference in material quality ,material width and material thickness, there is no uniform numberical reference. Therefore, it is suggested to take small sections of material for straightening before mass production and continue production after reaching the effect.
3 in 1 precision servo straightener uncoiler Electric eye loop control system Straightener opener device Feeding line easily adjusts by advance worm gear screw jacks device Feed and staightener rolls with a hard chrome finished Coiler material entry support assembly Tranformer 3 in 1 servo straightener feeder and uncoiler
APC Series precision metal stamping press adopts a multi-direction motion system, in which connecting rods are installed between double cranks and these rods are used to bear the load from two wide operation centers-ram and bolster. These designs help to prevent forward tilt- the direct cause to produce deviation. in this way, stamping's high-precision and small vibration could be well guaranteed, Therefore, the stamping press is quite suitable for multi-station precision pressing. Features: 1. With High rigidity rack design, they are welded with the use of high-quality steel plates, through relieving stresses,so that stability and reliability and of the whole machine in precision are enhanced. 2. Machine adopts high-alloy-steel, two-bent-axle, and two-wide work center, to optimize design. 3. In order to guarantee relative stationarity of machine operation, it is necessary to balancers. 4. Moulding-adjustment precision is as high as 0.1mm, safe,speedy ,and reliable . 5. Through hard oxidation and grinding ,such parts as bent axles,gear sets,and connecting rods possess higher combination property and tolerance. 6. Adopt highly sensitive and reliable clutch/brake and internationally top duplex,to guarantee precision an operation and stop of press 7. Machine's structural design shall be reasonable,for the convenience of realizing automatic production,red and improving 8. Possess advanced design concepts, low noise, low consumption, and energy
The presses precision of APF series stamping presses arrives to class 1-jis (Japannese industrial standards), which is suitable for progessive die stamping in high precision. Features: Mix European, American and Japanese advanced technologies/functional structure CAE dynamic si optimization design. High rigidity lathe bed high quality steel profiling welding or In-block casting part tempering/vibration stress processing. High standard fabrication processing of such key parts as gears and bent axis through hard chrome plating/nitriding/grinding. Such high level configurations as high performance controllers /drive parts /electromagnetic clutches/steam-driven elements and bearings. Technical grade if international stamping equipment and inspection of machine index. High memory module/individual design franchised software compilation. High compatibility multi axial variable speed drive/automation equipment onboard expansion. High intelligent human-computer interface/high frequency real-time control/Ethernet & USB interface. Standard configuration: >Hydraulic overload protector >Electric slider adjusting device >Digital moulding-height indicator(unit:0.1mm) >Slider and mould balancing device >Rotary cam switch >Crank angle indicator >Circulation centralization lubrication oil feeding device >Over-run safety device >Programmable controller >Indepence electric control cabinet >Maintenance tool and tool box Optional configuration >Die backer >Upper slider feeding device >Die light >Main motor inversion device >Photo-electric safety device >Safety groove and safety pin >Pre-determined counter(6 digits) >Loading inspection device >Missfeed detection consent >Frequency conveter >Basic bolt and soleplate >Anti-vibration foot >Safety shelf and safety ladder >Power socket >Quick die change device
API series stamping press can be used to process small electonic compnenets with high precision and large yield, such as comunication components, computer components, small componenets of household appliances,stator,rotor and other small components. Features: Adopt integrated high strength casting machine, with stress relief to guarantee long term precision. Three circle guide pillar slider structure adopting alloy steel bush and forced lubrication so that thermal fall to the minimum while precision may reach to the maximum. Dynamic equilibrium system is used to balance bent axles and vibration generated when slider runs control stability of the bottom dead center. Manual molding height adjustment is equipped with molding height indicator and oil pressure clamping device. Human computer interface(electronic cam + rotary encoder) operation is convenient and accurate. Operating functions are integrated on LCD, displaying, engine bases malfunction contents automatically. Adopts highly sensitive and reliable clutch and internationally top duplex magnetic valve, to guarantee safety for the operation and stop for press rams. With through electric loop design, they can be matched with various automatic devices to conduct a production to reduce cost, and to improve efficiency. Standard Condifuration: >Top stop >Manual slider adjusting device >Moulding-height indicator >Frequency converter >Programmable control (PLC) >Touch screen (pre-judge, pre-cut, and total count) >Encoder(clectronic) reserved(2 groups) >Drilling crew operation box >Air source connector >Sticking release device >Main motor(adjustable speed) >Oil-pressure mode locking >Mechanical crank angle indicator >Forced circulation oil device >Tool box >Operating manual >Power socket >Indepence electric control cabinet Optional configuration: >Anti-vibration foot >Feeder >Feeding rack >Material oil lubricating device >Bottom dead center detector >Oil cooler >Mould light >Air-blast device
APB metal stamping machine's presses precision arrives to class 1-jis (Japanese industrial standards). Therefor, it is quite suitable for small - or middle-size stamping parts' machining. Features: Body adopts integrated special cast iron alloy, with relieving of internal stress through technolog processing to ensure high precision high rigidity and anti-vibratio. Sliders are designed in length, so as to guarantee operation precision and Machine operation drive disk assembly adopts centralized detection and automatic forced lubrica design, so as to realize real time control and self- protection Adopts highly sensitive and reliable clutch and internationally top duplex magnetic valve to guar and safety for the operation and stop for press Through electric loop design meets European Machines structural design shall be reasonable for the convenience of realizing automation prod reducing cost, and improving efficiency Standard configuration: >Sticking release device >Air-blast device >Automatically-recirulating lubrication device >Manual slider adjusting device >Counter >Programmable logical controller >Slider and mould balancing device >Rotary cam switch >Crank angle indicator >Air source connector Optional configuration: >Anti-vibration foot >Frequency converter >Die lighting device >Preset counter >Feeder >Misfeed detection consent >Electronic cam display >PAC100 control system >Man-machine control system
