Cbn Micron Powder

Sintered wire mesh is the combination of different layer of wire mesh sintered under high temperature inert gas inside the furnace. During the sintering (diffusion bonding) process, indiviual wires and each adjacent layer of the mesh bond to each other.After cooling, the sintered wire mesh is rigid and completely flat readily to be finished. Sintered Wire Mesh Material: SUS304 (AISI304), SUS316 (AISI316), SUS316L (AISI316L), Alloy Metal as well Sintered plate Standard Size: 500 Ã?? 1000 mm, 600 Ã?? 1200 mm, 1000 Ã?? 1000 mm, 1200 Ã?? 1200 mm, or customized. Sintered wire mesh layers: 3 5 6 7 8 10 layers. Sintered mesh filtering rate: 1-100 micron Sintered filters: sintered mesh can be shaped into any tube, disc, conical shapes according to your requirements.

Product Introduction Metal powder serves as the only raw material for the sintered metal powder filter; no binders are used. It is generated by cold isostatic pressing and then sinters at high temperatures. By adjusting the process parameters and metal powder particle size, the pore size and distribution of the component can be changed. Utilize the pore structure, material composition, compressive strength, and other characteristics of different filter materials to develop filter products suitable for users. When the filter cake on the surface of the sintered metal powder filter element reaches a certain thickness, due to its high-strength performance characteristics, by backwashing or backflushing the filter element under a specific reverse pressure, the filter element can be cleaned and reused. Product parameters Material: stainless steel powder, brass powder, titanium powder Diameter: Length: 5 inches (125mm) 10 inches (250mm) 12 inches (300mm) 20 inches (500mm) 30 inches (750mm) 40 inches (1000mm) Interface form: M20 M30 222 226 Filtration accuracy: 0.45 micron 1 micron 3 microns 5 microns 10 microns 20 microns 30 microns 50 microns 80 microns 100 microns

Metal powder serves as the only raw material for the sintered metal powder filter; no binders are used. It is generated by cold isostatic pressing and then sinters at high temperatures. By adjusting the process parameters and metal powder particle size, the pore size and distribution of the component can be changed. Utilize the pore structure, material composition, compressive strength and other characteristics of different filter materials to develop filter products suitable for users. Product parameters Material: stainless steel powder, brass powder, titanium powder Diameter: Length: 5 inches (125mm) 10 inches (250mm) 12 inches (300mm) 20 inches (500mm) 30 inches (750mm) 40 inches (1000mm) Interface form: M20 M30 222 226 Filtration accuracy: 0.45 micron 1 micron 3 micron 5 micron 10 micron 20 micron 30 micron 50 micron 80 micron 100 micron Features Strong resistance to corrosion An inert metal with exceptional corrosion resistance is titanium. Strong alkali and strong acid media can be filtered using the titanium metal rod filter element. It has a wide range of applications in the chemical industry and in the filtering of the pharmaceutical industry's organic lysozyme production process. Good tolerance to high temperatures The titanium filter element has a high temperature resistance that goes up to 300C. In operational situations with high temperatures, this function is frequently used. The temperature resistance of the filter element made of polymer materials is normally limited to 50 C. The support and filter membranes will alter if the temperature goes beyond 50 C. It is frequently employed in the filtration of high-temperature liquids and steam filtration (steam filtration in fermentation processes), despite having a significant accuracy variance. Superior mechanical qualities With external pressure of 20 kg and internal pressure of 10 kg of destructive force, the titanium rod filter element has strong mechanical qualities and may be utilized in high pressure and quick filtration processes. The pore size of other polymer filter components will fluctuate or even break down when the external pressure is more than 0.5 MPa. Good regeneration Due to its superior corrosion resistance, high temperature resistance, and high strength performance, titanium rod filters have a good regeneration effect. There are two types of regeneration: chemical regeneration and physical regeneration treatment. Physical regeneration method: (1) Pure water recoil (2) Steam blowback (3) Ultrasonic cleaning Chemical treatment method: (1) Alkaline washing (2) pickling Applications Catalyst filtration and separation; Filtration of fluidized bed tail gas in petrochemical facilities and of high-temperature gas in the petrochemical industry; High-temperature flue gas purification in the metallurgical industry;

Titanium powder sintered filter disc is made of industrial pure titanium powder (purity 99.6%) as raw material, which is formed by rolling the powder and then sintering at high temperature and high vacuum. There is no need to add any binder during rolling. Because the raw material is high-quality titanium powder, the titanium powder sintered filter has a uniform structure, a porosity between 30% and 40%, a filtration accuracy of 0.22 microns to 100 microns, and high separation and purification efficiency. High temperature resistance, acid and alkali corrosion resistance. The sintered products are laser cut or lathe cut according to the size and style required by customers. The main shapes are: round, square, hexagonal and special-shaped pieces. Product parameters Product name: Customized porous titanium powder sintered filter disc for beverage filtration Filtration accuracy: 10 microns Porosity: 35% Size: 40mm 40mm (customized) Applicable temperature: 300 Features 1. Porosity, good air permeability; 2. Depth filter; 3. Easy to clean and backwash, long service life; 4. Narrow pore size distribution; 5. High separation efficiency and good filtration performance; 6. Corrosion resistance. The main usage Mainly used for liquid-solid separation of beverages, reverse osmosis pre-filtration

Supplier: Rare Earth Metal Powders Of Nano and Micron Size.
Buyer: Rare Earth Metals

Supplier: Polyester film (12 250 micron), glitter powder, metallic yarn, zari yarn ( m type, m x type), tracing and drafting film, iridescent lamination film

More SuperHard company offers a full line of diamond and CBN grinding wheels and dressing stones for fine grinding machines and single and double side lapping systems. Details More SuperHard company offers a full line of diamond and CBN grinding wheels and dressing stones for fine grinding machines and single and double side lapping systems. Our vitrified diamond and CBN grinding discs have high grinding efficiency, high wear resistance and abrasive consumption, good surface quality and flatness of the workpiece. Double Disc Diamond And CBN Grinding Wheel Applications of vitrified bond double disc grinding wheel Diamond grinding wheel, is suitable for grinding carbide, tungsten steel, PCBN high hardness of the workpiece, ceramic, optical glass, sapphire glass and other nonmetal materials. CBN grinding wheel, is suitable for high speed steel, bearing steel, tool steel, stainless steel, powder metallurgy, precision grinding mill cast iron and other hard materials. Applicable areas * Hydraulic pneumatic components. vane pump, conversion valve, piston pump, fuel pump, hydraulic motor parts. * Compressor spare parts. air conditioner compressor vane, piston, air cylinder, Refrigerator compressor valve plate. * Engine parts. automobile fuel pump parts, booster pump parts, oil pump nozzle parts. * High precision shaft seal, watch parts, molds, carbide blade, ceramic valve core, magnetic materials, etc Dressing Wheel For Diamond And CBN Wheel The dressing wheels are used for dressing diamond and CBN wheels. According to the different particle size, accuracy of the diamond and CBN grinding disc to choose the dressing wheel, making dressing easier and more time saving. Our customer tested surface roughness of workpiece by MarSurf M 400. The results show that the workpiece has the much stable performance and good surface roughness by using our diamond grinding disc.

What Is Sintered powder filter ? is a process in which a metal powder is passed through a special mold and is formed by high-temperature sintering. By adjusting the particle size of the powder, the process conditions, etc., it is possible to produce a porous metal sintered filter element having a wide range of filtration precision. Main Material ss316 316L and Titanium.. Micron Size 0.2um to 200um Thick-ness 2mm 2.5mm 5mm to 20mm or customized

Pre-filter Dpengineers prefilters are used for coarse pre-filteration, provision against insects, textile fibres, coarse applications. Dpengineers prefilters are available in the range of 15 to 20 micron (g3, g4 class) and 10 micron (f5, f6) Low initial pressure drop light in weight and easy to handle high cost / performance ratio high dust holding capacity cleanable / washable Applications: air-conditioning systems. Industrial ventilation systems. Coarse filtration and pre-filtration. Type, flange or box Frame, galvanized steel / crca powder coated / aluminium anodized / ss 304 Separators, aluminium Filter mediahdpe media / non woven synthetic media Gasket, neoprene rubber gasket Bs en 779 class, g3, g4 Filter efficiency/arrestance, g3, g4 50 ? 80% arrestance f5, 80- 90 % arrestance Eurovent class, eu 3, eu 4