Syphon Size 1/2 inch
Condensate Pot Size Pipe size 2, 3", 4", 6 and larger size upon request.
Standard length: Pipe length 8, 10, 12, and larger length upon request.
Pipe Schedule: 40, 80, 160, seamless pipe.
NPT as per ANSI B2.1 taper pipe thread furnished.
Socket weld as per ANSI B16.11
Butt weld as per ANSI B16.9
Working pressure: 6000 PSIG (41.34 MPa).
Snubber Size Bore sizes 3/4 to 10 in diameter
Travel ranges from 5 to 20
Load capacities from 738 lbs. to 187,900 lbs.
Pipe Clamps 1/2 - 18 Inch
Types Condensate Pot, Air Header, Pipe Clamp, Quick Release Coupling, Syphon Tube / Pipe, Pipe Clamp, Snubber, Lock Nut For O-seal, Gauge Snubber, Thermocouple, Thermowell, Gauge Adaptors, Gauge Saver, Pressure Gauge Accessories, Mini Ball Valve, Over-Pressure Protector, Cooling Tower, Adjustable Snubber
Application Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc.
Air Header Size Inlet Connection Size:1/2, 3/4, 1 inch Raised Face, Female NPT, BSPT, BSPP
2,3 & 4. inches
Drain Connection Type:Female NPT, BSPT, BSPP
Drain Port Size:1/2, 3/4, 1
Working Pressure:6000 psi [413 bar]
Test Certificates
EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Specification of Alloy 20 Instrumentation Accessories Syphon Size 1/2 inch Condensate Pot Size Pipe size 2, 3, 4, 6 and larger size upon request. Standard length: Pipe length 8, 10, 12, and larger length upon request. Pipe Schedule: 40, 80, 160, seamless pipe. NPT as per ANSI B2.1 taper pipe thread furnished. Socket weld as per ANSI B16.11 Butt weld as per ANSI B16.9 Working pressure: 6000 PSIG (41.34 MPa). Snubber Size Bore sizes 3/4 to 10 in diameter Travel ranges from 5 to 20 Load capacities from 738 lbs. to 187,900 lbs. Pipe Clamps 1/2 -18 Inch Types Condensate Pot, Air Header, Pipe Clamp, Quick Release Coupling, Syphon Tube / Pipe, Pipe Clamp, Snubber, Lock Nut For O-seal, Gauge Snubber, Thermocouple, Thermowell, Gauge Adaptors, Gauge Saver, Pressure Gauge Accessories, Mini Ball Valve, Over-Pressure Protector, Cooling Tower, Adjustable Snubber Application Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc. Air Header Size Inlet Connection Size:1/2, 3/4, 1 inch Raised Face, Female NPT, BSPT, BSPP 2,3 & 4. inches Drain Connection Type:Female NPT, BSPT, BSPP Drain Port Size:1/2, 3/4, 1 Working Pressure:6000 psi [413 bar] Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Nickel Alloy Instrumentation Tee
Alloy 20 Union
Alloy 20 Forged Cap
Alloy 20 Forged Cross
Alloy 20 Forged Tee
Alloy 20 Forged Elbow
Alloy 20 forged fittings are well known for their outstanding mechanical qualities at both low and high temperatures. They are very resistant to general corrosion, crevice corrosion, and pitting. This feature can be maintained in a variety of media, including chlorides, acidic mediums, and a variety of acid-containing solutions. Itâ??s important to remember that the alloy 20 material will only keep its corrosion-resistant characteristics if itâ??s kept in optimal metallurgical and clean conditions. Sulfuric acid resistance is excellent in Alloy 20 forged fittings. They are also resistant to Phosphoric acid, nitric acid, and aqueous salt solutions. When chloride stress corrosion cracking is a concern, Alloy 20 forged fittings are a good choice since they resist pitting and crevice corrosion. In chloride ion-containing situations, caution should be exercised because the rate of corrosion can dramatically increase. Chemical processing, petrochemical and refining, marine, pharmaceutical, and food processing are just a few of the industries that employ Alloy 20 forged fittings. Storage tanks, mixing tanks, agitators, pump and valve parts, food processing equipment, fasteners, and fittings are examples of end-use applications. According to ASME, applications are limited to a maximum temperature of 1000 F. It's also crucial to figure out whether the required corrosion resistance can be attained in the particular environment.
Alloy 20 Snubber
