CHEMICAL NAME: Polymeric ferric sulphate DESCRIPTION: BLUWAT PFS-S series is Poly ferric sulphate powder of direct drying type, a kind of superior performance of inorganic polymer flocculant, appearance is yellow solid, easily soluble in water, aqueous solution of 10% (mass) for the red brown transparent solution, hygroscopicity. Poly ferric sulfate is widely used in drinking water, industrial water, all kinds of industrial wastewater and urban sewage purification, sludge dewatering, etc. It's a safe reliable clarificant. ADVANTAGES: ,No Al+ and Cl-, safe, reliable and nontoxic. Rapid sedimentation and good flocculation Wide effective PH value and strong applicability comparing with aluminum salt. In industry waste water processing, good decolorization and high removing effect on COD. APPLICATION FIELDS:,Industry waste water treatment (such as the paper making waste water, the printing waster water, the massacre waste water, the automobile manufacturing waste water, the beer factory waste water and so on.), ,Many kinds of industry circulating water treatment (ex, the blast¨Cfurnace gas washing water, the make-up water of the high pressure boiler in the heat and power plant, the industry waste water in biochemical treating factory, the waste emulsifying solution, the opalescent solution and the oil waste water. ,Clarifying agent in Sugar,Medicine,Tanning,Cosmetic etc TYPICAL PROPERITIES: Appearance: Light Yellow Powder Fe3+ Content (%): 19Min. Restore Substances ( Fe2+) Content%: 1.0% Max. Basicity: 9.0-14.0% PH(1% water solution): 2.0-3.0 Insoluble Substances (%): 1.5 Max.
Ferric sulphate 25 kg
Ferric sulphate
ferric sulphate, Payment Terms : T/T, Bank or Wire Transfer, Cryptocurrency, PayPal, Western- Union, Ria-Transfer Total or Minimum order Quantity ?, For Delivery time get back to us so we can provide all those for you if interested. Regular others also have added advantages, Bulk orders as well
Poly ferric sulphate Appearance: Light yellow amorphous solid. The product quality meets the China National Standard (GB14591-93). Methods of operation and point for attention. As the property of raw water is different, experiment for the optimum dosage and conditions previous to operation is necessary so as to obtain the best effect. 1. Determination of the consistency. Before using, dissolve the product in running water in the proportion of 10-30 so as to make it hydrolyze completely. Laying it to present red brown solution, then dilute it to the consistency required for coagulation. It is usually diluted to the consistency of 2-5 in waterworks, and 5-10 in the industry waste water 2. Determination of the optimum dosage. In view of the different property of raw water, it can be determined by the experiment. For the waterworks, you may refer the dosage of other flocculant operated before. Under the same conditions, its dosage is almost equal to the Polymer Aluminium Chloride, 1/3-1/4 of the solid Aluminium sulphate. For the liquids product, you may calculate its dosage according to its consistency. 3. Pump the medicament compounded into the measure trough. When operated, add it into the raw water to coagulate with the raw water 4. It is usually compounded when operated in the running water. It is normal to have a little precipitate in it. Pay attention to the waterpower condition and the state of alum flower in the course of coagulation; Coacervation stage: The medicament flows into the coagulation pool, where it coagulates rapidly with the raw water and forms tiny alum flowers within very short time, at the same time, the water becomes even more turbid. A sharp rushing water is necessary in this stage. For the beaker test, mix for 10-30S in the speed of 250-300r/min, normally not exceed 2 mins. Flocculation stage: It is a process that tiny alum flowers grow longer and bigger. It is necessary for the water to have a suitable rushing water and sufficient velention period (10-15mins). In the later period of this stage, a large quantity of alum flowers gather and subside slowly. For the beaker test, mix for 6 mins in the speed of 150-200min, then 60r/min for 4 mins, to present a suspended state. Subsidence stage: It is a process that the flocculate subsides in the subsidence tank, where a slow current velocity is necessary. To improve the water quality, the subsidence tanks are usually designed in the oblique tube or oblique board model, (it is best to separate the flocculate by the fªgas-floating) method), so that a large quantity of thick alum flowers are stopped by the tube or board wall and subside at the bottom of the tank. The upper layer is clear liquor. In the meantime, the alum flowers with small size and density subside slowly and continue colliding to grow large. In the later period, the turbidity id almost fixed. For the breaker test, mix for 5 mins in the speed of 20-30 r/min ,then subside for 10mins and check the turbidity . 6. Strengthen the filtering: Choosing the reasonable filtering layer structure and filtration aid, is the important measure to improve the water quality. 7. For the treatment of industry waste water , on the whole it is similar to the waterworks. Cooperated with other coagulant aid, it will achive a optimum effect in the treatment of raw water with high colour, COD and BOD. 8. For the factories and mines employing the chemical coagulation method, the product can also be used by adding a dissolving pool only. 9. The product can be preserved in the place for a long time, where is dry, damproof and heatproof(normally below 80 f¦).And be sure not to damage the package. 10. The product must be dissolved before use . Further, the equipment for dissolution and feeding should be anti-corrosive. The application field and reference dosage .(Cf form2). Name Recommended Consumption Drinking Water 1:400000-1:400000 Industrial Water 1:400000-1:400000 Town Water 1:30000-1:60000 Electroplating Effluent 1:30000-1:50000 Metallurgy Mineral Separation Effluent 1:20000-1:50000 Non-ferrous Mineral Separation Effluent 1:20000-1:40000 Iron and Steel Industry Effluent 1:15000-1:30000 Coal Washery Effluent 1:10000-1:30000 Power Plant Effluent 1:10000-1:30000 Food Industry Effluent 1:8000-1:16000 Machine Work Emulsion Effluent 1:5000-1:12000 Chemical Industry Effluent 1:6000-1:10000 Oil Field Driling Effluent 1:6000-1:8000 Printing & Dyeing Effluent 1:5000-1:7000 Paint-making Effluent 1:5000-1:7000 Scouring Effluent 1:4000-1:6000 Paper-making Effluent 1:3000-1:6000 Leather-making Effluent 1:3000-1:6000 Sludge Dehydration 1:100-1:160 Package: Inner: Nonpoisonous polythene plastic bag. Outer: Weaving bag N.W.:25kg per bag. Characteristics of the product: Compared with other quality inorganic flocculant, the product has the following characteristics. 1. It is a new, high quality and efficient molysite category inorganic characteristics. 2. It has a good coagulation function with thick alum flowers and fast subsiding speed. 3. The product has an excellent purifying effect. It is safe, reliable, nonpoisonous and harmless. It doesnf+t contain any harmful substances such as Aluminium, Chlorine and heavy metal ions, neither does it have water phase transference of iron ions. 4. It can be used in discolouring, dehydrating, deodorizing, degreasing, sterilizing as well as discarding heavy metal iron, radioactive substance and carcinogens in the water, and eliminate COD, BOD, and colour as much as 90·-. 5. It can suit the water that the pH is form 4 to 11, (the optimum pH is 6-9). After treatment, the pH has little change. Further, the product has little corrosiveness to the equipment. 6. It has a very good effect in purifying the raw water with algae, low temperature and low turbidity, and slightly contaminated. 7. It has a better effect in purifying the high turbidity raw water. 8. It can be used at a very low cost, and save the cost as much as 20-50·-. 25KGS PER BAG.
Product Name:Poly Ferric Sulphate Molecular Formula:[Fe2(OH)n(SO4)3-n/2]m CAS NO.:1327-41-9 HS CODE:3824999990 Specification Item Index Standard Fe 19%min Reducing substances( Fe 2+ï¼? 0.1% max Basicity 8.0-16 PH (1%water solution) 2.0-3.0 Water Insolubles 0.3%max As 0.0002%max Pb 0.001%max Appearance YELLOW POWDER Application It is widely used in water treatment fields like drinking water, industrial waste water, urban sewage purification treatment. The functions are obvious to the high turbidity of raw water, paper mills waste water,electroplating waste water, paint factory waste water treatment, etc. Package & Storage Packing:25kg/bag,One 20FCL can load in 20MT without pallets; Store and shelf:Keep in well-ventilated warehouse.Shelf life 12months if stored in cool,dry conditions.
Product name:21% polymer ferric sulphate with low price in china Cas no. : 10028-22-5 Einecs no.: 233-072-9 Mf:[fe2(oh)n(so4)3-n/2]m Hs code: 3824909990 Property: it is a inorganic polymer flocculant with superior performance, it appearance is a light yellow amorphous solid powder. Application: widely used for purification in drinking water, industrial water , industrial wastewater, urban sewage, sludge dewatering, etc. Package: plastic woven bag with pe liner. N.W. 25kg.
chemical formula AL2(SO4)3 appearance :white, light grey Specification: Al2O3:15.80%-17%min; Fe:0.50%max; PH:3.0min Water Insolubles:0.15%max. As:0.0005%max; Pb:0.002%max. Grain size:15mm max(Flakys) Use Used in papermaking , printing and dye , tanning leather , fire-fighting equipment , drug and wood preservation ,etc Package: PP/PE 50KG/BAG,25KG/BAG, 25MT/20GP. PP/PE 50KG/BAG.
Chemical formulaú¦al2(so4)3 Appearance :white, light grey Specification: Al2o3:15.80%-17%; Fe:0.50%max; Ph:3.0min Water insolubles:0.15%max. As:0.0005%max; Pb:0.002%max. Grain size:10-100mm max Use used in papermaking , printing and dye , tanning leather , fire-fighting equipment , drug and wood preservation , etc Package: pp/pe 50kg/bag, 25kg/bag, 25mt/20gp Price: 123usd/mt fob qingdao Payment: t/t , l/c Delivery date:10days after receive t/t or l/c Delivery port:qingdao port , china Pp/pe 50kg/bag, 25kg/bag, 25mt/20gp.
