Woodflex W8542Sb Matt (10%)

PU Clear Dead Matt 10% Wood Coatings

MATT/GLOSS 10%, 30%, 50%

Tufkote W8785SLM Clear Matt 10% Tufkote W8785SLM Clear Satin 30% Tufkote W8786SLM Clear Gloss

Acrylic Emulsion all-around paint provides a weather-resistant and robust surface. High water vapour permeability, with a high barrier effect against CO2 and chlorides which makes it suitable as conrete protection especiallly in urban environments. protects the surface against formation of mould. Suitable exterior as topcoat on facades of concrete, masonry and plaster etc. Also suitable interior, where a matt, ribust surface that does not furbish up(changed gloss) by touching is desired. Suitable: Interior/Exterior Thinner: Water Spreading rade mm/liter and treatment: 8-10 Gloss 60: 5 matt Water vapour permeability 1,2GPa s mm/kg at 100um 10L/bucket

Product data sheet Flutex 10 Product description Type: Latex wall paint, based on acrylic binder, matt. Flutex 10 provides a beautiful finish with a soft gloss. The product is easy to apply and to repaint, and it provides a robust and washable surface that stands spot cleaning. The opacity of tinted colours is indicated on the tinting label. Product application Suitable interior for walls, e.g. in institutions, offices, living rooms and corridors, where the surface is exposed to dirt and/or wear. Technical data Density: 1,35 kg/litre Gloss: 10, matt Solids: Weight%: 56 Vol.%: 40 Spreading rate: 8-10 m2 per litre and treatment£¨depending on the condition of substrate£© Wash ability Top Level (GB/T 9266-1988) Water vapour permeability: Sd= 0.21m equal to class 2, according to EN 7783-2 Application temp.: Recommended min. working temperature during drying/curing: +10¡æ Max. atmospheric humidity 80% RH Drying time at 20oC, 60% RH: Dry to touch: 1 h Recoat interval: 2 h Fully cured: Several days Dilution: 1st coat: Max. 10% water 2nd coat: Undiluted Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 2.8L & 9.1L.

Odor, color, grade: Corresponding color, little odor General physical form: Liquid Autoignition temperature: No data available Flash point: Not applicable Boiling point: 212 of Density: 1 [ref std: water=1] Vapor density: No data available Vapor pressure: < 20 mmhg [test method: estimated] Specific gravity: 1.01 [ref std: water=1] Ph: 6 - 7 [details: undiluted] Melting point: No data available Solubility in water: Complete Available size: 8 fl.0z, 10 fl.Oz... Available color: matt, gloss, white, black, grey, red…

Two Component Polyurethane Based Matt Varnish PRODUCT DESCRIPTION Product type Polyurethane Brightness 40-45 gloss ± 5 Volume Solids (%) 57 ± 1 Solid Matter by Weight (%) 60 ± 1 Theoretical Coverage (m / kg) 10-12 dry film thickness 30-35 POT LIFE SA (20 C) 5 Density (g / cm) 0.93 + - 0.03 Powder drying, Touch drying, Stacking dry (20 �ºC / minute) 20-30 minutes-50-70 minutes-24-30 hours Full Curing 24 hours (20C) Mixing Ratio P.V.1541-07 1.KOMPENANT 100 parts (By Weight) P.V.S.07 2.KOMPENANT 25 parts (By Weight) Application Thinner Universal acrylic polyurethane thinner 35-40 parts Application Tools Spray gun Airmix Spray, Roller Color Transparent

Acrylic Paints Water Base Paints Wall Paints New Acrylic, Vynil, Waterbase paints, White and colors, Residential and contractors grade, Name of product V600 Interior Acrylic Waterbase paint White and light colors Product origin : North America Key Specifications/Special Features : GENERALAcrylic vinyl paint with a matte finish is characterized by developing its hiding power when dry, recommended to be applied with a brush and roller on plaster, concrete, wood and flat surfaces in general. Minimum Order Size : Full Container Loads DENSITY (g/ml) 1.31 +/- 0.035 a 25°C  BRIGHTNESS 10 to 20 Glitter Units at 60 °  DRYING TIMETo the touch 30 minutes, at 25 ° C (77 ° F) and 50% humidity-relative. The drying time can be increased depending on the environmental conditions and the substrate. Quality From ISO 9000 paint manufacturer

Flugger data sheet Facade 25 Product description Type: Acrylic emulsion elastomer wall covering facade paint, matt. Flugger Facade 25 is based on acrylic binder with high performance. It provides a weather-resistant, elastic, crack bridging and robust surface. The surface is permeable for water vapour, with a high barrier effect against CO2 and chlorides, which makes it suitable as concrete protection especially in urban environments. Protects the surface against formation of mould. The opacity of tinted colours is indicated on the tinting label. Product application Suitable exterior for finishing treatment on facades of concrete, masonry and plaster etc. Technical data Specific gravity: 1,35 kg/litre Gloss: 9 Solids: Weight%: 58 Vol.%: 43 Spreading rate: 8-10 m2 per litre and treatment£¨depending on the condition of substrate£© Wash ability Top level (GB/T 9266-1988) Application temp.: Recommended min. working temperature during drying/curing: +10¡æ Maximum atmospheric humidity 80 % RH Drying time at 20¡æ, 60% RH: Dry to touch: 1 h Recoat interval: 6 h Fully cured: Several days Dilution: 1st coat: 10% water 2nd coat: Undiluted Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 2.8L & 9.1L & 18.2L.