Standards
ASTM B574, F1554 / ASME SB574, SF1554
Dimensions
DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Fasteners size
Bolt / Screw Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes.
Nuts Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes.
Washers Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes.
Machine Screws Size : M1.6 â?? M12.
Self Tapping Screw Size : No.2 â?? No. 14.
Length
3 mm to 200 mm
Threads
UNF, BSW, BSF, METRIC, UNC or as required
Surface Coating
Ptfe Coated Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating
Finishing
Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide.
Principal Design Features C-276 is a wrought corrosion-resistant alloy. A prime advantage of this alloy is that it generally does not require solution heat treatment after welding. It resists the formation of grain boundary precipitates that would degrade corrosion resistance. Types HASTELLOY C276 HASTELLOY C-276 alloy is a nickel-molybdenum-chromium wrought alloy that is generally considered a versatile corrosion-resistance alloy. HASTELLOY C-276 alloy has excellent resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, hot contaminated media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and seawater and brine solutions. It is used in flue gas desulfurization systems because of its excellent resistance to sulfur compounds and chloride ions encounted in most scrubbers. HASTELLOY C22 The C-22 alloy exhibits superior weldability and is used as overalloy filler wire and weld overlay consumables to improve resistance to corrosion C-22 alloy has exceptional resistance to a wide variety of chemical process environments including strong oxidizers such as ferric and cupric chlorides, chlorine, hot contaminated solutions (organic and inorganic), formic and acetic acids, acetic anhydride, and seawater and brine solutions HASTELLOY C2000 The technical objective during the design of HASTELLOY C-2000 alloy* was even greater versatility, as compared with the traditional Ni-Cr-Mo alloys. This was accomplished by use of a high chromium content (23 wt.%), a high molybdenum content (16 wt.%), and a small but effective addition of copper (1.6 wt.%)
Standards ASTM / ASME B564 / SB564 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, C22 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Product: Fasteners Brand: Renaissance Pipe Fitting Inc. Sizes: Refer to the specification Condition: New Rating:4.5, based on� 42� reviews price: Start from� 2� USD ASTM Hex Bolt Fasteners, SS Fasteners, UNS S31803 1UNS S32205 (F 51), UNS S32760 ( F 55), High Nickel Alloy Fasteners, supplier RFP India is India\'s well-known manufacturer, supplier, and exporter of industrial fasteners in carbon steel, stainless steel, nickel alloy, and alloy steel grades in a range of sizes and shapes. Our range of products comprises different forms of steel fasteners like Bolts, Nuts, Screws, Washer, Threaded Bars, Stud bolts and more. We manufacture standard quality steel fasteners which are offered in standard sizes that range from M10 TO M100 and in customized lengths. RFP India is one of the leading suppliers of nickel alloy fasteners, stainless steel fasteners, alloy steel fasteners, carbon steel fasteners, and high tensile fasteners to different industries like gas and oil, petrochemicals, plumbing, waste water treatment, heat exchanger, pulp and paper manufacturing, food processing industry, and power generation among others. Dimension range : 5/16\" (M6) up to 4\" (M100) for all grades. FORM : Hex Bolt & hex Screws, Threaded Rods, U Bolts, Socket Head Allen Caps Screws, Plain Washers, Hexagonal nut Stainless Steel Fasteners : 304 (B8) , 316(B8M) , 316 L , 316Ti , 317 L , 310 , 321H (B8T) , 347H (B8C) , SS 410 (B6) , 904 L (UB6) , A453 GR 660 A/B/C & D. Duplex & Super Duplex Steel Fasteners : UNS S31803 1UNS S32205 (F 51), UNS S32750 (F 53), UNS S32760 ( F 55), UNS S31254 (SMO 254 ). High Nickel Alloys Fasteners : Monel 400 , Monel K 500 , Incoloy 600 , Incoloy 625 ,Incoloy 800H, Incoloy825 , Incoloy 718, Inconel X- 750 , Alloy 20 (CB 20), Hastelloy C 276, Hastelloy C 22, HastelloyC4. Other Alloys Fasteners : Titanium Gr 2 , Titanium Gr 5 , Aluminium Bronze ( AB 2) , Phosphorous Bronze (PB). Test Certificate : Mill Test Certificate as per EN 10204 / 3.1 Types Of Fasteners â?¢ SS 310 / 310S Hex Bolt & hex Screws â?¢ Duplex Steel UNS S31803 Fasteners â?¢ Stainless Steel 304 / 304L U Bolts â?¢ Duplex Steel Plain Washers â?¢ Stainless Steel 316 / 316L Threaded Rods â?¢ Duplex Steel UNS S32205 Threaded Rods â?¢ Stailess Steel 321 / 321H Plain Washers â?¢ Super Duplex UNS S32750 U Bolts â?¢ Monel 400 Hexagonal nut â?¢ Hastelloy C276 Fasteners â?¢ SS Fasteners â?¢ Steel U Bolts â?¢ Inconel 625 Fasteners â?¢ Alloy 20 Fasteners â?¢ Cu-Ni 70/30 (C71500) U Bolts â?¢ Cu-Ni 90/10 (C70600) Hex Bolt & hex Screws â?¢ ASTM A105 Fasteners â?¢ ASTM A350 LF2 / LF3 Threaded Rods â?¢ Inconel 600 Fasteners â?¢ Hastelloy B2 Fasteners â?¢ SS 317 / 317L Plain Washers â?¢ Super Duplex U Bolts â?¢ SS 347 Hex Bolt & hex Screws â
Grades :Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000 Size :1/2"NB to 12"NB Standard :ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE Types :Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectacle, Ring Joint Features: Durability Corrosion resistance Dimensional accuracy High strength Excellent finish
Standard ASTM B164 / ASME SB164 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Standards ASTM B164, F1554 / ASME SB164, SF1554 Dimensions DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 Fasteners size Bolt / Screw Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Nuts Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Washers Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Machine Screws Size : M1.6 â?? M12. Self Tapping Screw Size : No.2 â?? No. 14. Length 3 mm to 200 mm Threads UNF, BSW, BSF, METRIC, UNC or as required Surface Coating Ptfe Coated Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating Finishing Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide.
Standards ASTM B473, ASME SB473 Dimensions DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 Fasteners size Bolt / Screw Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Nuts Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Washers Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Machine Screws Size : M1.6 â?? M12. Self Tapping Screw Size : No.2 â?? No. 14. Length 3 mm to 200 mm Threads UNF, BSW, BSF, METRIC, UNC or as required Surface Coating Ptfe Coated Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating Finishing Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide.
Standards ASTM B166, ASME SB166 Dimensions DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 Fasteners size Bolt / Screw Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Nuts Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Washers Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Machine Screws Size : M1.6 â?? M12. Self Tapping Screw Size : No.2 â?? No. 14. Length 3 mm to 200 mm Threads UNF, BSW, BSF, METRIC, UNC or as required Surface Coating Ptfe Coated Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating Finishing Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide.
Standards ASTM B348 , ASME SB348 Dimensions DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 Fasteners size Bolt / Screw Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Nuts Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Washers Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Machine Screws Size : M1.6 â?? M12. Self Tapping Screw Size : No.2 â?? No. 14. Length 3 mm to 200 mm Threads UNF, BSW, BSF, METRIC, UNC or as required Surface Coating Ptfe Coated Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating Finishing Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide.
