A long radius (long sweep) swivel joint is a type of swivel joint that has a longer radius of curvature than a standard swivel joint. This longer radius allows for smoother rotation and less turbulence, which can improve flow characteristics and reduce wear and tear on the joint. Long radius swivel joints are often used in high pressure applications, such as oil and gas drilling, where smooth rotation and low turbulence are critical.
Here are some of the specifications of long radius swivel joints:
1. Sizes: 1-4 inches
2. Working pressure: 3,000-20,000 psi
3. Materials: Steel, stainless steel, alloy steel
4. End connections: Threaded, flanged, union
5. Working Pressure: 25 Mpa - 70 Mpa
Here are some of the applications of long radius swivel joints:
1. Oil and gas drilling
2. Fluid handling
3. Mud lines
4. Sour gas
5. Acidizing and fracturing
6. Testing lines
7. Crude oil and gas
1).size: 2'', 3'', 4'' 2).working pressure:6000-20000psi(42Mpa-140Mpa) 3).working temperature: -29�°C~121�°C. 4).application enrvironment: standard or H2S 5).Standard: API standard 1 Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA. 2 Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa). 3 We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4 Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5 All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment. 6 Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7 Usually good lubrication can ensure that swivel joints work normally without much maintenance.
Supplier: Flanges, fittings, swivel joints, hammer unions, welding neck flange, slip on flange, socket weld flange, lap joint flange, threaded flange, blind flange, spectacle blind flanges, high hub flanges, flat flanges, ring type joint flanges, long welding neck flange, orifice flange, jis flange, api 6a flange, sorf flange, blrf flange, groove & tongue flanges, expander flange, elbow, tees, cross, forged street elbow, coupling, half coupling, cap, round plug, hexagon plug, square plug, hexagon bush, forged hex nipple, forged union, pipe nipple, bull plugs, swage nipple, hose union, hose barb union, long radius swivel joints, short radius swivel joints.
asme b16.5 flange, asme b16.47 flange, asme b16.48 flange, asme b16.36 flange, din flange, bs 4504 flange, bs 10 flange, en1902 1 flanges, stainless steel flange, carbon steel flange, duplex & super duplex steel flange, low temperature carbon steel flange, alloy steel flange. Pipe fittings
Services: Manufacturing, production, exporter
Carbon Steel Forged flanges are a type of flange that is commonly used in high-pressure piping systems. They are designed to be welded or bolted onto the end of a pipe and are typically made from forged steel. Forged flanges are stronger and more durable than cast flanges, making them a better choice for applications where high pressure and/or temperature are present. Benefits of CS Forged Flanges â?¢ High strength and durability â?¢ Better resistance to corrosion and wear â?¢ Can withstand high pressure and temperature â?¢ Available in a variety of sizes and materials Applications of CS Forged Flanges â?¢ Piping systems â?¢ Valves â?¢ Pumps â?¢ Heat exchangers â?¢ Pressure vessels Types of CS Forged Flanges â?¢ Slip-on flanges â?¢ Socket weld flanges â?¢ Lap joint flanges â?¢ Threaded flanges â?¢ Blind flanges â?¢ Spectacle blind flanges Selection of CS Forged Flanges When selecting forged flanges, it is important to consider the following factors: â?¢ The pressure and temperature rating of the piping system â?¢ The type of material that the flange is made from â?¢ The size of the flange â?¢ The type of connection that the flange will be used with CS Forged flanges are a critical component of many piping systems. They provide a strong and reliable connection between pipes, valves, and other equipment. Additional Information â?¢ Forged flanges are typically made from carbon steel, stainless steel, or alloy steel. â?¢ Forged flanges are available in a variety of sizes, from NPS 1/2 to NPS 24. â?¢ Forged flanges are available in a variety of pressure ratings, from PN 2.5 to PN 400. â?¢ Forged flanges are available in a variety of connection types, including slip-on, socket weld, lap joint, threaded, and blind flanges.
Forged flanges are a type of flange that is commonly used in highpressure piping systems They are designed to be welded or bolted onto the end of a pipe and are typically made from forged steel Forged flanges are stronger and more durable than cast flanges making them a better choice for applications where high pressure andor temperature are present Benefits of Forged Flanges High strength and durability Better resistance to corrosion and wear Can withstand high pressure and temperature Available in a variety of sizes and materials Applications of Forged Flanges Piping systems Valves Pumps Heat exchangers Pressure vessels Types of Forged Flanges Slipon flanges Socket weld flanges Lap joint flanges Threaded flanges Blind flanges Spectacle blind flanges Selection of Forged Flanges When selecting forged flanges it is important to consider the following factors The pressure and temperature rating of the piping system The type of material that the flange is made from The size of the flange The type of connection that the flange will be used with Forged flanges are a critical component of many piping systems They provide a strong and reliable connection between pipes valves and other equipment Additional Information Forged flanges are typically made from carbon steel stainless steel or alloy steel Forged flanges are available in a variety of sizes from NPS 12 to NPS 24 Forged flanges are available in a variety of pressure ratings from PN 25 to PN 400 Forged flanges are available in a variety of connection types including slipon socket weld lap joint threaded and blind flanges
A forged half coupling is a type of pipe fitting that is used to connect two lengths of pipe. It is made of forged steel, which gives it a high strength and durability. The half coupling has a threaded end that screws onto one end of the pipe, and a socket end that is welded or flanged to the other end of the pipe. Here are the technical specifications of a forged half coupling: Material: Forged steel Sizes: 1/4 inch to 4 inches Pressure ratings: 2000 psi, 3000 psi, and 6000 psi Temperature ratings: Up to 1000 degrees Fahrenheit Thread types: NPT, BSP, and BSPT Finishes: Black, galvanized, and stainless steel
A forged coupling is a type of pipe fitting that is made by forging, a process that uses heat and pressure to shape metal. Forged couplings are typically made of steel, but they can also be made of other metals such as stainless steel, alloy steel, and copper. Forged couplings are stronger and more durable than other types of pipe fittings, such as threaded couplings. They are also less likely to leak. Forged couplings are used in a variety of applications, including water, gas, and oil pipelines, as well as in industrial and construction applications. Here are some of the technical specifications of forged couplings: Material: Steel, stainless steel, alloy steel, copper Class: 2000, 3000, 6000, 9000 Size: 1/8 to 4" End type: Socket weld, threaded, flanged Size: Typically available in sizes from 1/2 inch to 12 inches
An expander flange is a type of flange that is used to connect two pipes or vessels. It is designed to allow for the expansion and contraction of the pipes or vessels without causing damage. Expander flanges are typically made of stainless steel or carbon steel, and they can be either welded or bolted. Here are some of the technical specifications of expander flanges: Pressure rating: Expander flanges are available in a variety of pressure ratings, from 100 psi to 10,000 psi. Temperature rating: Expander flanges are available in a variety of temperature ratings, from -200 degrees Fahrenheit to 1200 degrees Fahrenheit. Material: Expander flanges are typically made of stainless steel or carbon steel. Finish: Expander flanges can be either bare or have a protective coating, such as a paint or plating. Size: Expander flanges are available in a variety of sizes, from 1/2 inch to 24 inches.
A slip-on raised face (SORF) flange is a type of flange that is attached to a pipe by slipping it over the end of the pipe and welding it in place. The flange has a raised face on the inside, which creates a seal between the flange and the pipe. Here is an example of a SORF flange specification: NPS: 1/2 to 24 Inch Pressure class: 150 - 2500 Standard: ANSI/ASME B16.5, B16.48, 16.36, BS 4504, BS 1560, BS10, API 6A Material: Carbon steel, Alloy Steel, Steel, Ductile, Duplex Hub thickness: 0.5 inches Bolt holes: 8 holes, 1/2 inch diameter
The API 6A flange is a ring joint flange that is used in the petroleum, chemical, and gas industries. It is designed to withstand high pressures and temperatures, and is available in a variety of materials, including carbon steel, stainless steel, and alloy steel. The API 6A flange specification covers the following: Dimensions and tolerances Materials and welding requirements Pressure and temperature ratings Testing and inspection requirements Marking and documentation The API 6A flange is available in a variety of sizes, from 2 inches to 24 inches in diameter. It is also available in a variety of pressure ratings, from 2000 psi to 10,000 psi. The following are some of the technical specifications of the API 6A flange: Face-to-face dimension: The distance between the faces of the flanges when they are assembled. Hub thickness: The thickness of the hub, which is the central portion of the flange. Weld neck thickness: The thickness of the weld neck, which is the cylindrical portion of the flange that is welded to the pipe. Ring groove: The groove in the face of the flange that is used to seal the flanges together. Bolt holes: The holes in the flanges that are used to bolt the flanges together.
