Main feautures
maxbass: great sound from a small speaker bluetooth: wirelessly send music easily remote control: full control from the comfort of the client¡¡¥s favorite seat learning remote feature: allows the use of one remote rounded black ash cabinet with flat base: elegant and functional gloss highlights: conveys richness and value integrated keyway wall mounts: easy to install a wireless 8¡¡à, 100 watt subwoofer for sensational bass and easy placement.
Specifications
Soundbar descriptions: soundbar tweeters: two 1¡¡à soft dome drivers woofers: four 3¡¡à polyxd drivers amplifier power: 2 x 20 watts frequency response: 120hz-20khz inputs: optical, stereo rca outputs: subwoofer out dimensions, inches (hwd): 4-1/4¡¡à x 40¡¡à x 3-1/2¡¡à
Subwoofer descriptions: soundbar woofers: 8¡¡à polyxd driver amplifier power: 150 watts frequency response: 50hz-120khz dimensions, inches (hwd): 10.6¡¡à x 10¡¡à x 10¡¡à
For more info pls visit www.Tsdaudio.Com
Specifications
Amplifier
Rated Output Power 80W+40W
Frequency Response 30 - 16000 Hz, -3dB
Signal to Noise Ratio >75dB
AUX1-3 Input 1.0V RMS 20kohm
Coaxial Input 0.5V RMS 75ohm
Total Harmonic Distortion <1%
L/R Speakers
Speaker Impedance 3 inch speakers 8ohm
Sensitivity >82dB/m/W
Subwoofer
Speaker Impedance 4ohm
Speaker Driver 6.5 inch subwoofer + 1 passive subwoofer
Sensitivity >78dB/m/W
Dimension / Weight W x H x D / KG
Main Unit 960 x 105 x 97 mm / 4.5 kg
Subwoofer 265 x 265 x 265 mm / 6 kg
Box - Main Unit 1250 x 180 x 180 mm / 6.5 kg
Box - Subwoofer 335 x 335 x 335 mm / 7kg
General Information
AC Power Adapter 100-240V ~ 50/60Hz
DC Power input 24V 5A
Operation Power Consumption <80W
Standby Power Consumption <1W
TruSurround HD4, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround HD4 technology is incorporated under license from SRS Labs, Inc.
is a trademark of SRS Labs, Inc. TruSurround HD4 technology is incorporated under license from SRS Labs, Inc.
Contents:
Description of the Soundbar and the subwoofer
Description of the remote:
Connections
Connections
Connect the woofer to the soundbar using the included
cable.
Connect your devices to the soundbar. Choose the
appropriate source input depending on the made
connections, i.e If you connect Bluetooth device then
choose BT as the source input. Refer to the available
source inputs, page 6.
Wireless Bluetooth connection should chose the BT
source and then search in the bluetooth player for
soundbar and then connect. Note: connecting Bluetooth
device to soundbar not require any password.
Note
- Do not connect the power cord into the AC outlet until all
connection are made and are correct.
- Please turn on the unit before turn on the external active
subwoofer.
- Please turn off the external active subwoofer before turn
off the unit.
Note
- Do not connect the power cord into the AC outlet until all
connection are made and are correct.
- Please turn on the unit before turn on the external active
subwoofer.
- Please turn off the external active subwoofer before turn
off the unit.
Functions
Press Menu buttons to adjust available values. When
pressing MENU button it will choose respective
adjustable values according to below:
1. S (0-60 DB). Adjust the subwoofer output level
2. TB (0-100). Adjust bass level
3. DF (0-100). Adjust surround level
4. DC (0-100). Adjust CENTER speakers effect
5. C (0-60 DB). Adjust CENTER speakers volume
6. M (0-60 DB). Adjust MAIN volume
Notes:
1. The proper combination of input and output mode (Both the Active Subwoofer
and the supply source, i.e CD,MP3,VCD,DVD¡-..)will produce optimize
sound quality. Please refer to both instruction Manual.
2. Some DVD device has high level signal output. When the Master Volume is
turn high until the distortion occurs, please turn down the Master Volume to
prevent damaged to the speaker unit and amplifier.
When this product is subjected to strong external interference(mechanical shock,
excessive static electricity, abnormal supply voltage due to lighting ,etc.) or it
is operated incorrectly, it may malfunction. If such problem occurs do the
following to reset the system.
1. Set the system to STANDBY mode and turn the POWER on again.
2. If the system is not restored using the previous operation, turn off the MAIN
POWER switch, unplug the power cord plug for few minutes and try to Power
on it again.
For more info pls visit www.tsdaudio.com
surements. As the smallest model of our mn series, the mn4 pair features many of the distinctive elements of its larger siblings like a special mechanical design that provides an exceptionally rich sound without any unwanted resonance. Just don't get fooled by the remarkable small size, your pair of mn4 will be an important part of your recording studio very quickly!
Specification
2 way, two speakers all with amplifier
Active studio monitor speaker
1" silk dome tweeter (hf driver)
4" pp cone lf woofer
Output power: 70w, 110v-220v
Frequency response: 55 - 20 khz
Impedance: 8ohm
Spl: 85 db +/3 db@1m/1w
Input: xlr / ts1/4" combo connector, balanced / unbalanced input; rca input
Dimention(h/w/d): 256x160x240 mm
For more info pls visit www.Tsdaudio.Com
K5n-f front & center speaker
Speaker type: Xtk-f fzront¢er
Woofers: 5" pp cone midbass x 2
Tweeter: 25mm silk dome tweeter x 3
Power: 10 - 150 watts
Impedance: 4 ohm
Frequency response: 45 - 25k hz
Sensitivity: 88 db
Grill type: Black cloth
Finish dimensions: 315 d x 267 w x 332 h(mm
K5n-r surround
Speaker type: Xtk-r surround speaker
Mid-bass: 5 " pp cone midbass x 1 + 3" paper cone fullrange x 1
Tweeter: 25mm silk dome tweeter x 1
Power: 10 - 100 watts
Impedance: 6 ohm
Frequency response: 85 - 25k hz.
Sensitivity: 91 db
Grill type: Black cloth
Finish dimensions: 165 d x 201 w x 267 h(mm)
K12s sub
Single down-firing active 12" aluminum driver
Dual side-firing 12" aluminum passive radiators
650 watt class d amplifier
Usb power jack for easy wireless connection
Small internally braced 3/4" hdf sealed enclosure
Virtually vibration-free cabinet.
Please note:
- auto connection will not function if tsd-t12 is turned off via the main power switch at the rear of the unit.
- if a seventh device is connected, device a¡¡¡ê¡ès address will no longer be memorised.
- always start bluetooth in your smartphone/computer first, and then start tsd-t12 for auto connection.
3. If the ¡¡ãpair ¡¡¡§¡è button is pressed while bluetooth is selected as the audio source, tsd-t12 will perform a new
Search for 3 minutes during which the led will rapidly flash blue.
For more info pls visit us at www.Tsdaudio.Com
