PolyPower D
Multi-Functional Diesel Fuel Additive
Description : PolyPower - D is a multi-functional fuel additive package formulated to overcome the operational problems of Diesel gasoline engines. It is a complete solution to solve all Diesel fuel related problems like high exhaust emissions, high fuel consumption, sludge, moisture, corrosion of fuel system etc.
Reduction in exhaust Emissions: PolyPower - D has been fortified with combustion boosters .Its surface active agents keeps entire fuel system clean & healthy and maintain fuel injection pattern to achieve maximum burning of the fuel, which reduces the exhaust emissions up-to 90%.
Increases Mileage & Saves Fuel: PolyPower D helps to achieve complete combustion of the fuel. More combustion means more power is delivered to the piston. This process ultimately leads to better performance and better mileage. It saves fuel up-to 5 v 8 %.
Increases Fuel Injector Life: PolyPower D has got organic lubricity additives to extend the life of fuel injector, valves etc.
Controls Carbon Deposits: PolyPower D contains one of the best dispersant and surface active agents to keep entire system free from the carbon deposits.
PolyPower D eliminates moisture from the fuel system to prevent corrosion and growth of micro- organisms. It has one of the most advance fuel stabilizers to prevent the fuel stratification and sludge formation. It also helps in cold engine start.
Ash less Composition : PolyPower D has been formulated form very selective ingredients which do not form any ash content on combustion. It is an environment friendly product.
TYPICAL PHYSICO-CHEMICAL PROPERTY
Appearance : Free flowing clear liquid.
Colour : Light green.
Density @ 29.5 ¼C : 0.8120
Kinematics Viscosity @ 40 ¼C : 4.0 cSt.
Flash Point (COC) : 74 ¼C
Pour Point : (-) 40 ¼C
Shelf life : 12 months.
Applications : PolyPower- D can be used is any type of Diesel - Powered engines like passenger cars, Power generation units, buses, heavy duty marine engines, trucks, earth movers operating on Diesel engines and other Diesel engines.
Dosage : Add to fuel tank before refilling. Use at the rate of 1 ml./ liter of diesel fuel i.e. 100 ml. for 100 liter. For initial treat use a double dosage to remove build-up. For best results regular use is recommended.
Caution : Avoid contact with skin. Flammable, keep away from source of heat. Store in cool place.
Packing : Poly Power- D is available in 500ml, 5, 20 & 50, 210 liter packings.
5, 20,50 and 210 lit. cans.
THERMOL 180
Semi Synthetic High Temperature grease
Description : Thermol 180 is a non-melting high temperature grease with extreme pressure additives, formulated from highly refined mineral base oil and bentonite proprietary thickener and solid lubricants.
Thermol 180 has non-melting thickener which prevent melt or run-out of grease from bearing at high temperature. Thermol 180 ensures trouble free lubrications at high temperature. It reduces friction and wear. It also extends re-lubrication periods.
Typical Physico-Chemical Properties
Appearance : Black.
Drop point, C : none
Penetration worked @ 25 C : 325
Shelf Life : 18 months.
Four ball machine o.k. load, N : 2,400
Applications : Thermol 180 can be used in wide range of following high temperature industrial applications from (v) 30 C to 180 C with normal regreasing. However, it can be used upto 200 C with frequent regreasing in :-
1)Furnace door bearings.
2)Kiln car wheel bearings.
3)High temperature conveyor bearings.
4)Exhaust fan bearings.
5)Rotary kiln bearings.
6)Roll neck bearings.
7)Industrial ball and roller bearings in high temperature applications.
Packing : Thermol 180 is available in 1, 5 & 20 kgs. packings.
Available in 1,5 and 20 kg packings
XG - 325
High temperature chain lubricant
Description: XG-325 is a synthetic lubricant specially formulated for high temperature lubrication requirements of conveyors. It¦s solid lubricants dispersed in synthetic carrier, give excellent lubrication to conveyors passing through heated ovens
XG-325 is a stable lubricant. Its penetrating carrier fluid readily carries solid lubricants into inaccessible areas. Its carrier fluid evaporates above 180 C and leaves solid film for efficient lubrication. There is no risk of carbon or gum build up
Typical hysico-chemical properties
Appearance : Black
Base : Synthetic fluid with solid lubricants
Specific gravity : 0.98
Viscosity @ 40 C : 150 cst.
Flash Point : 250 C
Pour point : (-) 30 C
Shelf Life : 2 years
Application Areas : XG-325 is recommended for lubrication of moderately loaded chains, conveyors, bearings operating at high temperature e.g. ovens. It is an excellent high temperature Chain Lubricant to eliminate erratic operations of conveyors used to carry air conditioning compressors through a 325 F oven
Direction for use : Stir well before use. Apply by brush
Packing : 1 Kg., 5 Kg., & 25 Kg. containers.
Sprayable aerosol packing can be provided on demand
1 Kg., 5 Kg., & 25 Kg. containers
Sprayable aerosol packing can be provided on demand
POLYSIL 20
Silicone Mould Release Spray
Description : Polysil 20 is an excellent mould release agent cum multipurpose lubricant with silicone & purified ozone friendly propellant.
Polysil 20 is an odourless, non-toxic user & environment friendly product free from hazardous solvents. It has excellent surface coverage.
Polysil 20 is chemically inert and has very good temperature stability from (-) 40ªC to (+) 250ªC. It does not carbonize, melt or freeze. Its film having high tackiness resists breakdown under mechanical shear & heavy loads.
Polysil 20 is an mould release agent for plastic moulding industries to :
* Minimise rejects * Reduces markings
* Reduces spotting * Prevents sticking
* Gives corrosion protection * Gives lubrication
Application : Polysil 20 finds wide applications in following areas :
Mould release agent for plastics, Polyesters, Nylon, Rubber & Melamine etc.
Lubricant for conveyor belts, slide plates, tables, guideways etc.
Cleaning heaters of yarn manufacturing, texturizing and molding machinery.
Lubrication of high temperature motors & other precision equipments.
Non-spotting general-purpose lubricant for electrical & electronic equipments, food processing machinery, Pharmaceutical plants etc.
Direction for use : Hold the can upright and spray from distance of 15v20 cms. Usually one pass is sufficient.
Packing available : 500 ml. aerosol pack.
500 ml. aerosol pack.
