Lay-up limit: í²0.38mm/7
Lay-up scope: 8.13mm-60mm
Copper wire diameter: 0.12-0.60mm
Direction: right or wrong
Take-up bobbin size: 630mm
Lay-up section area: 0.8-6.00mm
Driven motor: 5hp motor+ frequency converter
Max. Speed: 1600rpm
Brake: electrical powder brake
4000*1500*2300mm
Use:
This machine can lapping the cable with the copper belt, mica belt, aluminium foil, dion belt, the transparent belt, the wheat belt and the adhesive-bond cloth.
Technical parameter:
1.Applicable wire diameter: 0.25mm-12mm
2.The pay-off bobbin size:100mm-280mm
3.The take-up bobbin size:800mm
4.Power: 3 phase, 2.2kw, 2 pc frequency converter, take-up power 16 n.M
5.Speed: 2500r/m
2000*1700*2300
Techinical parameters
Insulation material:silicon rubber
Work direction :from left to right
Screw:ª¦70mm, l/d12:1, hardnessú¦hrc55ía5
Line speed:5 ~ 100m/min
Conductor size: ª¦ 0.2 ~ 9 mm
Finished wire od:ª¦ 2.0~ 20mm
Silicon put out: max. 80kgs/hr
Max. Line speed:100m/min
Powerú¦380v 3 phase, 4 line 60kw, control power: 220v, 24a
Center height : 1000mm
Air pressure: 0.4mpa, 15m3hr
Humidity: ín95%, if the machine humidity, it must dry, then use
Working noise: ín70dp, test distance: 1000mm
60m*3m*3.5m
Techinical parameters
Insulation material:silicon rubber
Work direction :from left to right
Screw:ª¦70mm, l/d12:1, hardnessú¦hrc55ía5
Line speed:5 ~ 100m/min
Conductor size: ª¦ 0.2 ~ 9 mm
Finished wire od:ª¦ 2.0~ 20mm
Silicon put out: max. 80kgs/hr
Max. Line speed:100m/min
Powerú¦380v 3 phase, 4 line 60kw, control power: 220v, 24a
Center height : 1000mm
Air pressure: 0.4mpa, 15m3hr
Humidity: ín95%, if the machine humidity, it must dry, then use
Working noise: ín70dp, test distance: 1000mm
60m*3m*3.5m
1.Pay-off type: auto tension pay-off, pay-off bobbin size: ín 630mm
2.Traverse type: servometer +ball bearing lead scew+plc control.
Power: 3hp
3.Main body ratation speed: 0-500rpm, inner diameter: 120mm
4.Line od.: ín310mm
5.Line height: 30-100mm.
6.Used scope: used for flat, round and singal that upto 6mm cross section
2000*1700*2300mm
