Features:
On vehicle models from the e65 on, bmw is for the first time using fibre-optic cables as standard for communication between control units.
The optical buses are notable for their high data transmission rate and they are not susceptible to electromagnetic interference. The optical buses in question are the most bus, primarily used for in-car entertainment electronics, and the byteflight bus, which serves predominantly safety-critical functions.
Ops is intended for rapid programming of control units.
When operated at the sss, no diagnostic or technical measuring pro-cedures are possible, as no measuring technology is incorporated; in this instance, opps / ops is used predominantly for programming control units (flashing). Communication with the vehicle can be performed both via the most and via the obd interface. The obd interface is required for the power supply to the opps / ops and has communication properties via which the vehicle can be identified and the data to be programmed can be determined. From cip version 7.0, it is possible to delete fault code memories via opps / ops.
Description:
Bmw group tester one (gt1) is offered to the aftermarket in the same specification that is currently supplied to bmw franchised dealers. It is special-purpose tool of bmw series.
Gt1 is supplied with a pentium based laptop pc on a windows platform connected to a high specification communications and measurement interface.
Gt1 can complete coverage of all bmw systems, one thing that can only be done using the gt1, this function is called electronic control unit (ecu) programming and configuration. Many of the original electronic systems on modern vehicles can now be re programmed using software; historically any changes to rectify software problems would involve a new ecu which would be purchased from the parts department and that is the only way that the independent market today is able to overcome these problems. The bmw gt1 system allows you re programme all bmw car ecu's to fix software or to install a blank ecu to a repaired vehicle. Gt1 is the only system that allows you to do this and is absolutely essential if working on freelander , the gt1 is also the only system that provides all diagnostics and programming for the very latest bmw launched this year.
Bmw gt1 software kit comprises of five system , tis system .Dis data system ; diagnosis system .Measuring system and manangement system . You can to test and check data information same time in gt1.
Test function :
Read faulty code , clear faulty code , data stream .Activate state, programming , component test , maintenance data information , components location , wiring diagram etc..., tis and dis are supply all of system diagram of all of bmw car, components location, maintainence method and coding information etc. Can do completely of bmw car system.
1. Gt1-scan pro mainbody
2. Network cable
3. Gt1 for vehicles with 20pin diagnostic connector
4. Gt1 for vehicles with obii diagnostic connector
5. Latest diagnostic version of software(two hdd)
Function: 1.It can read code, clear code, and match element testing.
2. It can also lead repairman analyses fault from face to inside, inquire, till obviate the fault.
3. This system offers the exhaustive original data. The function is equal to 5052a.
Hardware: 1. Personal computer (1g memory, dual-core cpu )
2. Bluetooth
3. Usb cable
4. 5054a multiplexer
Software: 1. Vw 14.85
2. Audi 14.85
Support language: english, german, chinese
Feature:
An industry change in protocol from obd ii to controller area network (can) has begun. In order to perform diagnosis on a vehicle that uses the can interface, you will need the tech 2 flash and a can diagnostic interface module.
The candi module connects between the tech 2 flashÆs diagnostic link cable and the obd adapter. Once the candi module is connected, it can be used on all gm vehicle applications, even those vehicles using other platforms such as obd i and obd ii.Includes the can diagnostic interface module and instruction sheet.
The following gm vehicles utilize the can interface:
ò 05 buick allure (3.6l)
ò 05 buick lacrosse (3.6l)
ò 05 buick rainier (5.3l)
ò 04-05 buick rendezvous (3.6l)
ò 04-05 cadillac cts (3.6l)
ò 04-05 cadillac srx (3.6l / 4.6l)
ò 04-05 cadillac xlr (4.6l)
ò 05 cadillac sts (3.6l / 4.6l)
ò 05 chevrolet cobalt (2.2l)
ò 05 chevrolet corvette (6.0l)
ò 05 chevrolet equinox (3.4l)
ò 05 chevrolet trailblazer (5.3l)
ò 05 chevrolet ssr (6.0l)
ò 04 chevrolet malibu (body/chassis only)
ò 05 chevrolet malibu (3.5l)
ò 05 gmc envoy (5.3l)
ò 05 pontiac g6 (3.5l)
ò 05 pontiac gto (6.0l)
ò 05 pontiac pursuit (2.2l)
ò 03-05 saturn ion (2.2l)
Product description
Description
Dealer diagnostic scanner for comprehensive citroen and peugeot cars diagnostic. You can do all as a authorized dealer does. This diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics is performed via obd-ii connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Supported functions
Unlike other universal car scanner tools which only read fault codes, this software performs nearly all the functions like the original dealer diagnostic tool. Our diagnostic interface contains k-line multiplexor, can-bus interfaces and sae j1850 bus (both pwm and vpw).
The following diagnostic functions are supported:
Read identification
Displays complete identification of control unit, e. G. Part number, software/hardware version, manufacturer, etc...
Read fault codes
Displays all stored and pending fault codes with complete description (e. G. "rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
Clear fault codes
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test)
Detects all ecus (electronic control units) installed in car and reads all diagnostic fault codes.
Measured values
Program displays live data like engine speed, battery voltage, oxygen sensor, coolant temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
Zed-bull key programmer 1- transponder cloning: 11, 12, 13, 33, 73, 4c (writing to 4c electronic key and batteryless tpx1 transponder), philips crypto 40 (some), 41(all), 42(all), 44(all unlocked vag), 45(all), texas crypto 4d(all 60-61-62-63-64-65-67)to batteryless tpx2 and silca electronic heads. Until now, common transponder cloning tools could only copy fixed
Transponders. But the revolution that we started with our device,
Zed-qx, is increasing with zed-bull. 41(nissan), 42(vag), 44(unlocked
Vag) and 45(peugeot) transponders which normally known as can not be
Copied, can be copied with zed-bull. Also you can copy 4c
Transponders onto batteryless tpx1 4c glass transponders.
The newest version is 2009.09 .Mb star 2008 realizes all the functions of official factory benz star2000: reading out and erasing trouble code; reading the real-time data of sensor and actuator; coding and programming. Mb star 2009 applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to version 02/2008, can enter all the benz cars, such as bus, truck, saloon car, sports car, smart car and so on.
Mb star 2009 testable system
Testable system
Engine
Auto-speed
Air conditional system
Srs
Abs
Asr
Mpl
Gm
Benz original anti-theft dasx system
Keyless entering system- obd-ii system
Ther new system , 100% as same as original diagnostic star 2000
Mb star 2009 function
Reading fault code
Erasing fault code
Live-data, adaptation
Component testing
Maintenance information consultation
Component location diagram
Wiring diagram
Coding the new ecu
About mb star 2009 software
Das: concise interface and straightforward operation with ibm high-quality computer can realize the quick and accurate code reading and the whole car system testing.
Wis net supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model ùûall in detail.
Star finder component location diagram for colorized.
Software languages english/chinese/deutsch/french/italian/korean/spanish/portuguese/finnish/danish/japan/swedish
Software version das may, 2009, wisnet may, 2009, epc may, 2009n+£star finder may, 2009
Mb star 2009 package list
1. Multiplexer
2. 16+pin obd ii cable
3. 38+pin cable
4. 14+pin cable
5. 4pin cable
6. Rs232 communication cable (navigation port)
7. 80g harddisk with das, wis net, epc, starfinder software v.09/2009
8. Ibm t30 laptop(optional)
Description:
Features:
C4 2008 star scanneris the lately updated professional diagnostic equipment for mercedes benz cars manufactured after year 2000. It is much difference in the shape from compact3 and smaller in size , lighter in weight than compact3. C4 can do all the works what compact3 does and it is the replacement of compact3-star. C4 operates based on the windows xp system, it includes workshops information system(wis system), the movement management system and the automatically diagnose system(the das system) . C4 2008 star works with original computer (compact3) via both of rs232 and 485 proctocl. Power can be supplied to original computor(compact3) via the cables.Compact3 star can diagnose varied cars, trucks, buses of mercedes benz making.
The package include:
Multiplexer x 1pc
Obd ii cable x 1pc
4 pin cable x 1pc
38 pin cable x 1pc
14 pin truck cable x 1pc
Communication cable x 1pc
