Type: Single Band, Double Band, Triple Band, Mini Type, Semi Type
Size Range: DN50-DN600
Length: 150mm-600mm
Band/Clamp: Stainless steel AISI 304
Rubber Gasket: EPDM/NBR
Bolts: Galvanized steel
Nuts: Stainless steel A2-70
Working Pressure: PN10, PN16
Be used on repairing of cracks, breaks and holes of different kinds of pipelines like cast Iron, ductile Iron, steel, asbestos cement, PVC, HDPE pipe etc. Suitable for water, sewage, gas, oil etc.
-
Size Range: DN50-D2000
Body Material: Ductile Iron GGG50, Carbon Steel ST37.2 with FBE coated
Flange Drilling: EN1092 PN10, PN16, PN25, AS/BS TD, TE
Working Pressure: PN10, PN16, PN25
Equipped with galvanized steel bolts, nuts
Rubber Seal: EPDM or NBR
Bolt & Nut: Galvanized Steel, Hot Galvanized Steel, SS304, SS316
Usage: Connect pipes, fittings and Valves
-
Type: Single Section, Double Section, Folding Type
Size Range: 21mm-379mm
Material: Stainless steel AISI304/316
Bolt and nut: Stainless steel AISI304/316
Rubber Gasket: EPDM/NBR (WRAS approved rubber gasket is also available)
Applied to connection of all pipeline. It is used for quick repairing of pipe leaks, which can work under pressure. To repairing pin holes and breaks of pipe caused by aging or rusting. It can provide safe, fast and steady connection and very good effect of anti-vibration and noise reduction.
-
Size Range: DN40-DN1000
Allowable Operating Pressure: PN10,PN16,PN25
Maximum Temperature: 80â??
Valve design: DIN3352
Face to face: DIN3202 F4,F5, EN558-1 14,15 Series
End Flange: EN1092 PN10,PN16,PN25
Hydraulic test according to EN12266,ISO5208
Operatorï¼? Hand wheel, Gear Box, Electric Actuator, Pneumatic Actuator
-
Size Range: DN50 PVC63- DN300 PVC315
Working Pressure: PN10, PN16
Working Temperature: -10â?? - +80â??
Standards: EN1074, DIN3352
Socket End: ISO4422
Face to face according to EN 558-1 15 Series
Operator: Hand wheel, gearbox, cap etc.
Coating: Inside & outside fusion bonded epoxy
Hydraulic test according to EN 12266, ISO5208
Application: for PVC-U pipe push on
-
Size Range: DN40-DN1000
Allowable Operating Pressure: PN10,PN16,PN25
Maximum Temperature: 80â??
Valve design: BS5163,EN1074
Face to face: BS5163, EN558-1 Series 3.
End Flange: EN1092 PN10,PN16,PN25, ISO7005-2
Hydraulic test according to EN12266,ISO5208
Operatorï¼? Hand wheel, Gear Box, Electric Actuator, Pneumatic Actuator
-
Size Range: DN50 PE63 - DN300 PE315
Working Pressure: PN10, PN16
Working Temperature: -10â?? - +80â??
Standards: EN1074, EN 1171
Connection: rubber ring +brass
Operator: Hand wheel, cap, extension spindle etc.
Coating: Inside & outside fusion bonded epoxy
Hydraulic test according to EN 12266, ISO5208
Application: HDPE pipe push on
-
Size Range: DN50 - DN1200
Working Pressure: PN10,PN16
Working Temperature: -10â?? - +80â??
Valve design according to EN 593, BS 5155
Face to face :BS5155 Short Body, EN558-1 Series13
End Flange: EN 1092 PN10/PN16
Hydraulic test according to EN 12266, ISO5208
Operator: Handle Worm Gear, Electric Actuator, and Pneumatic Actuator
Bi-directional shut off seat
Integrated vulcanized rubber seat
Low torque with perfect profile of disc seal edge;
-
Size Range: DN40â??DN1200
Working Pressure: PN10, PN16
Working Temperature: -10â??+80â??
Valve Design: EN 593, BS 5155, API609, MSS SP-67, ISO7005
Face to face: EN 558-1 Series 20, DIN3202 K1, ISO 5752 Series 20
End Flange: EN 1092 PN10/PN16, ANSI B16.1 Class 125/150, AS2129 Table D/E.
Hydraulic test according to EN 12266ã?�ISO5208
Operator: Handle, Worm Gear, Electric Actuator, Pneumatic Actuator
Bi-directional shut off seat;
Suitable for portable water, sewage;
-
Type: Flanged Duckbill Check Valve, Slip on Duckbill Check Valve
Size: DN50-DN1800
Rubber Material: EPDM, NBR, NR, CR, CSM, FKM etc.
End Connection: Slip on/Flange
Flange/ Clamp material: Galvanized Steel, AISI304 or AISI316
Flange Drilling: EN1092 PN10, PN16; AS2129 Table D/ E, ANSI B16.10 Class 150# etc.
Pressure: PN10, PN16
Curved Bill, flat bottom is also available
For more detail information kindly come to worgocn dot com or contact us sales at worgocn dot com freely.
-
Christmas decorations
In you need packing
Good quality,inner control.
One piece in one carton
Good quality,inner control
Can packing in your needs.
Size Range: DN50-DN600
End Flange: EN 1092-2 PN10/PN16
Working pressure PN10/16
Working temperature -10â?? - +80â??
Design: EN1074-3
Face to face: EN558-1
Test Standard: EN 12266-1
Coating: Inside & outside fusion bonded epoxy
Application: water, sewage, neutral liquid and pump station
-
Type: Single Type, Double Type, BSP/NPT Thread Type
Size Range: DN25-DN1600
Material of Rubber ball: CR, NBR, EPDM, HYPALON, VITON
Material of flange: Galvanized Steel, Stainless Steel
Working temperature: -20â?? to +115â??
Ball length for Single Sphere: 130mm, 150mm, 95mm-300mm
Ball length for Double Sphere: 175mm-345mm
Ball length for Union Type: 200mm for DN15-DN50, 240mm for DN65-DN80.
Thread End Connection: BSP or NPT thread
Flange End Connection: EN1092-1 PN10/PN16, ANSI150, BS4504, AS2129 Table D/E.
Working Pressure: PN6, PN10, PN16, PN25
Application: water, warm water, seawater, weak acids, alkalis, etc...
Easy installation and remove; absorbs vibration, noise and shock
-
