Taiwan INNOVATOR Machinery is an international Longitudinal Veneer Splicer (integrated gluing system) manufacturer with the excellent quality and service in Taiwan. We specialize in designing, manufacturing, marketing and servicing Longitudinal Veneer Splicers (integrated gluing system) and other veneer processing equipment for the decorative board, door and furniture industries as well as veneer and plywood processing plants. INNOVATOR Machinery also provides whole plant equipment planning to meet essential needs of our customers. INNOVATOR's Longitudinal Veneer Splicers (integrated gluing system) marketed to many countries has been widely proven worldwide.
Features:
1. The cut veneers are absolutely parallel: this accuracy is obtained by the fact that the whole veneer bundle is under pressure while cutting, so that buckles in the veneers will be straightened out. The cutting movement is done on both sides of the veneer edges at the same time.
2. Timesaving (short working cycle) : thanks to the high speed movement on the working table by servo motor with 3 sets of linear guides and 2 sets of ballscrews , the operator can simply cut veneer bundles by just one button.
3. Movable laser line (veneer optimizing system) ¡V the manually operated laser line for the position of the front knife is quickly set. The veneer width is transferred to the computer at the push of a button. The cutting process is then started automatically.
4. Computerized control panel ¡V this user-friendly control panel is able to hold with more than 50 sets of different veneer width at the same time in a direct program mode.
Model: CutMate-3200D
Cutting Length: 3200 mm
Daylight Opening: 80 mm
Hydraulic Motor: 15 HP
Cutting Width: 30 ~ 470 mm
Moving Table (Servo Motor): 500 W
Machine Dimensions (L x W x H): 4900 x 1750 x 2005 mm
Hydraulic Tank Dimensions: 1130 x 535 x 990 mm
(L x W x H)
Net Weight (with Hydraulic Tank): approx. 7810 kg
* Technical data is not binding and can be modified without prior notice.
Thanks to our partner, savi industries from denmark, innovator machinery is now building savi guillotines in taiwan with the original technology and know-how being transferred.
Features:
1. Second-Cut technology
This unique feature can only be found on all Innovator guillotines. When using the knife in the second position, a thin clip approx. 1 mm is cut off the veneer pack after the first trim. This Second-Cut feature can be necessary when working with thick or specially hard veneers.
2. Hydraulic-Driven for Knife and Pack Beam
All Innovator guillotines are completely hydraulic on both knife and pack beam. As a result, the pressure on knife and pack beam is individually adjustable and no mechanical damage will injure the machine in case that the machine is overload.
Seen from a safety point of view, the knife and pack beam will return to top-position immediately if the cutting cycle is broken.
3. Security
All Innovator guillotines are featured with two-hand operation of knife and pack beam. The movement of the pack beam against the veneer pack stops immediately if only one push button is released.
4. Innovator Guillotines
The Cutmate series, are constructed with a view to the highest security of the operator¡¦s assistants without causing inconvenience to the working. All Innovator guillotines are completely hydraulic on both knife and pack beam.
Specification:
Model: CutMate 3200
Cutting Length: 3200 mm
(Other Length upon Request)
Daylight Opening: 120 mm
Hydraulic Motor: 10 HP
Rear Fence Motor: 0.5 HP
Pack Beam Width: 150 mm
Rear Parallel Fence: 25 ~ 675 mm
Machine Dimensions (L x W x H): 5000 x 1620 x 1820 mm
Net Weight: 4810 kg
* Technical data is not binding and can be modified without prior notice.
The VeneerSolid 950 is an entry-level machine ideal for "custom shops" with lighter application requirements (less than 8 hours run time per day). And this VeneerSolid 950 also meets all the splicing performance features of Innovator veneer splicing machine.
This machine enables users to avoid troubles caused by the traditional glue-thread splicing method. This machine is capable of splicing components for Diamond Match applications. The infeed rollers will accurately align the veneer by means of photocell sensor to avoid uneven alignment at the front end of veneers.
The ultimate crossfeed splicing machine is designed for glue-spliced joint for long and panel-sized veneer faces. The pre-glued veneer strips are fed into the machine manually with feeding stoppers for fast and easy operation. The integrated cut-to-size clipper at the outfeed section is for the designed-width faces.
Operators can also select the endless splicing model for jointing certain numbers of veneer strips. The production output of the crossfeed splicing machine is approximately 6 ~ 7 times faster than the longitudinal splicing machine. Together with our double sided veneer glue applicator, gluemate, and veneer fanning machine, fanningmate, a full set of veneer splicing line is completed.
Features:
1. Pre-feeding Stoppers: To avoid mismatching in the beginning of feeding stage, a specially designed stopping system ensures users a place-and-go¡¨ feeding operation for non-stop splicing work.
2. User-friendly Control Panel: A clear-and-easy¡¨ operation panel with user-friendly PLC based interface touch screen mounted right in the front of the machine allows users to reach the best production output.
3. Back Clipper: This standard accessory ensures a precise cut-to-size¡¨ veneer faces to be achieved.
4. Pneumatic and Hydraulic System: The UltiMate is equipped with European-made pneumatic and hydraulic system for a highest quality.
5. Hand-safety Guard: To avoid any human false against operator¡¦s safety, a photocell safety guard is mounted to protect operators when the crossbeam is in downward movement. The UltiMate meets European CE safety requirements.
Veneer Condition UltiMate 2800
Veneer Strip Thickness 0.35 ~ 1.2 mm
(depending on veneer condition) (other thickness upon request)
Veneer Strip Length: 750 ~ 2800 mm
Veneer Strip Width: 75 ~ 380 mm
Veneer Moisture Content approx. 8 ~ 12%
Machine Specification::
Average Production Speed up to 15 ~ 25 cycles/min. (depending on the veneer width and thickness of single sheet):
Electric Power: approx. 17 kw
Compressed Air: 6 kgs/cm2, 95 L/min.
Machine Dimensions 4215 x 2480 x 2065 mm (L x W x H)
Net Weight: approx. 5740 Kg
* Technical data is not binding and can be modified without prior notice.
