It is non-pressurized type solar water heater with water tank. It uses double-layer vacuum solar tube. This kind solar water heater is suitable for family in warm or hot areas.
There is no water in its vacuum solar tubes, the water can be heated in its tubes, and then the hot water will be stockpiled in water tank.
This non-pressurized solar water heater is very popular in asia, africa, torrid zone and warm area.
1) reliable and efficient with twin-glass solar tubes
2) easy plug-in installation
3) outer tank material: stainless steel plate or powder coated color steel sheet
4) inner tank material: 0.5mm thick sus304 food grade stainless steel plate
5) frame material: color steel
6) superior heat preservation ensured by 50 - 65mm polyurethane foam insulation layer
All items are packed into cartons. For sample products, cartons are packed into plywood boxes. For containers, cartons are packed into container directly.
It is pressurized type solar water heater separated with water tank. It uses double-layer vacuum glass solar tube which has cooper heat pipe inside.
This kind solar water heater is suitable both for families and projects in cold areas. It can be used in -25 celsius degrees.
There is no water in its heat pipe tubes.
This pressurized type solar water heater is very popular in europe and other cold areas.
1) high efficiency solar collector using heat pipe evacuated tubes
2) able to be used in all climates
3) reliable and efficient with twin-glass solar tubes
4) copper heat pipes for rapid heat transfer
5) easy plug-in installation for mounting on the roof or at ground level
6) maintenance free
7) suitable for mains pressure water (up to 8bar / 116psi)
8) corrosion resistant silver brazed copper header
9) frame material: aluminum alloy
10) casing material: aluminum alloy
11) excellent insulator in glass wool
12) collectors may be connected in series to increase water heating capacity
13) tubes easily replaced if broken - can be used with broken tubes
14) ideal for commercial solar water heating applications
Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
It is a non-pressurized type solar water heater separated with water tank.. It uses double-layer glass evacuated solar tubes.
It is high heat efficiency and economical system especially for projection. It is designed for commercial solar water heating application.
This type soalr water heater is very popular in some hot or warm areas.
1). Designed for commercial solar water heating applications
2). Reliable, efficient, twin-glass solar tubes
3). Polyurethane insulation ensures good heating performance and minimal heat loss
4). Manifold cover's material: stainless steel or galvanized sheet
5). Frame material: 1.2mm thick all stainless steel
6). Easy plug-in installation
7). Can be connected in series to increase water heating capacity
Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
This is a pressurized type tubular solar water heater (sfd type ) with copper coil.
Sfd model has a special copper coil heat exchanger in the inner tank. The coil copper pipe can bear 8 bars pressure. The water in the tank is used as the heat transfer medium, rather than using it directly.
The obvious advantages are with water supplier, which can supply cold water into the tank automatically; it can be connected with pressurized system.
Sfd is suitable for torrid zone and warm areas.
1). Designed to accept mains pressure cold water
2). Copper coil heat exchanger can be used as part of a closed or open loop system, providing heating to a main hot water tank
3). Freezing is of minimal concern for sfd series
4). Reliable, efficient, twin-glass solar tubes
5). Superior heat preservation with 50 - 65mm polyurethane tank insulation
6). Outer tank material: stainless steel plate or powder coated color steel sheet
7). Inner tank material:
A) 0.5mm thick sus304 food grade stainless steel plate
B) high purity copper for the heat exchanger coil
8). Frame material: 1.2mm thick all stainless steel
9). Collectors may be connected in series to increase water heating capacity
10). Easy plug-in installation
Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
This system consists five parts: solar collector, work station, expansion vessel, pressurized tank and controller.
This system provides many advantages. It is the simplest and typically the least expensive active system to install. There is no heat exchanger, which allows efficient heat transfer directly to the water.
The system operates at a standard line pressure. It is simple to add capacity to the system if demand changes. The system integrates easily with exsiting system.
Solar heating system
1) once heat-exchange system
2)twice heat-exchange system ( single copper coil )
3) twice heat-exchange system ( double copper coil )
Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
